XP installation LAUGH on 32 Satellite Pro A200 laptop via computer

Similar Questions

• Installation of WLAN Driver Satellite Pro A200 to WXP

  Hello

  I installed Windows XP SP2 for a client on Satellite Pro A200 (PSAE7E) and installed after is spoken in the German support hotline all drivers as in the test - instal .txt but I don't get the Atheros WLAN card to work.

  It is an ar5bxb72 of Atheros, but no way.
  I get all of the drivers in this list only works with the hardware, but not the card WIFI but I installed it in the list.
  Someone has a tip for me?

  Welcome them
  Marco

  Hi dude

  Are you sure that the laptop was equipped with the Atheros WLan card? According to some information that I found in the internet, this laptop comes with an Intel or Atheros WLan card!

  I checked the page Toshiba provides an Intel WLan Atheros Wireless Lan Client Manager and drivers. The Wireless Lan Client Manager is not the driver, but only the tool that helps you to configure your wireless network card and gives you more than the functions integrated configuration of windows configuration options.

  I recommend to download this portal Toshiba WLan WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

  By the way; If you use XP on this laptop preinstalled Vista you will need to update the BIOS to version XP too!

  Greetings ;)

• Satellite Pro A200 where to download the recovery disks

  Is anyone know where (or if) I can download installation / for the Toshiba Satellite Pro A200 recovery CD.

  See you soon,.

  The recovery CD can not be downloaded!
  Must order it from the ASP in your country if you have damage or lose!

  But I really don t understand why you ask this question! These questions are answered several times! First check the existing threads before you ask for something!

  concerning

• 'Common module' missing for XP on Satellite Pro A200

  Hi all

  I received my portable computer Pro A200 (PSAE7) Satellite with a Vista operating system.
  I made a fresh & clean in this regard XP installation using the Toshiba installation instructions document.
  Everything works well except my Fn + F6 Fn + F7 Fn + F8 keys for wireless and screen brightness.

  I did some research on the internet and I found this page:
  -http://support.toshiba-tro.de/kb0/TSB7401VB0003R01.htm

  Looks like I need the facility of "common module" Installer to operate access keys.
  But the problem is that the 'common' module is not available on the page of the driver for XP...
  If I change the Vista operating system type "Value package" is available, but it is not compatible on XP...
  I tried to download and install a 'common' module for Satellite Pro A120 model, but I got a "TVALZ" error when installing...

  Toshiba support forgot to upload a module 'common' installer of XP for Satellite Pro A200?
  How can I run my Fn + F6 Fn + F7 Fn + F8 keys?

  Any help will be really appreciated!
  Thank you

  Peut

  HM, do you already have a BIOS update? I guess you know that you need the Bios XP when installing XP on your machine?
  Usually these keys should work since the machine is powered (or explain it better: keys should be available from the BIOS, not OS) which depends on the BIOS, so please update your BIOS to the XP version if it is not already done and give some feedback.

  See you soon

• Satellite Pro A200 - 26 minutes of normal time remaining?

  Hi all

  My laptop Satellite Pro A200 is a little over 1.5 years (or young: P) and I have a huge problem with the battery - it only lasts for a total of _26 minutes_ under "high performace" mode in Vista - other modes the power increase time to 5-7 minutes.

  I've tweated the system configuration for:
  -too few programs running at startup;
  d ' use as little memory in what concerns the graphics (as in the disabled vista themes and operations "fantasies" show window contents while dragging).
  -stay on the low light.

  The programs that run at startup are my anti virus (F-Secure) and ATI catalyst control.

  I also cleaned the registry conflicts and scan for viruses regularly.

  I used Ubuntu on this laptop as well and the battery life is not that much better, which leads me to the conclusion that the battery comes to an end.

  I was wondering if this duration of battery life (26 minutes max on high performace) is normal for a laptop after only 1.5 years? * (I don't remember how long it has lasted when I first bought).

  Also, I have a laptop from other manufacturer of 2 years and its battery lasts a minimum of 4 hours (on Windows XP).
  The two laptop batteries are 6 cells.

  Any suggestions on how to improve my battery life?

  Thanks in advance.

  > Satellite Pro A200 laptop computer is a little over 1.5 years and I have a huge problem with the battery - it only lasts for a total of 26 minutes in "high performace" mode in Vista

  Battery working time depends on different factors:

  If parts of different hardware such as CPU, GPU, HDD, ODD, display perform better performance then dramatically decreases your battery work time
  In addition, if you lose a stronger battery (9 or 12 cells cell) then you should be abele run Notepad a lot more time using the battery power.
  In addition, the battery loses the own performance systematically and after a long period of use, you will need to replace the battery.

  However, if you wish, you can check the Vista Power Options to increase the working time of battery:
  Here's a nice article:

  How to manage Windows Vista power management features
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  But in the worst case you will need a new, stronger battery

• Satellite Pro A200: RIS installation fails - BSOD

  Hello

  Someone has already tried to use RIS for laptops Satellite Pro A200 ETA-1 image. I'm getting a BSOD which I think is due to a bad driver (downloaded from the Toshiba site).

  Also, can someone tell me where I can find a telephone number for technical support (UK), they seem reluctant to make available on their web site.

  Concerning
  Paul

  Hello

  satellite Pro A200 has the controller Intel AHCI-build. It is not included in Windows XP. You will get a bluescreen 0x0000007B proving that XP cannot identify the controller and has no driver for it.
  Here is a brief description of how add that driver to your RIS installation:

  1 copy all the single files from the Storage Manager Intel ICH - 8 M 32 - Bit floppy in your directory$ $oem $ \Textmode.
  If this directory exists you must change your txtsetup.oem file and add/extract the AHCI driver of the file txtsetup.oem of the F6 floppy in it (do not overwrite the txtsetup.oem file in this case!).
  If this directory does not exist, you can use the supplied txtsetup.oem file numodified.
  Download the floppy F6 Storage Manager here: http://support.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip

  2. change your Winnt.sif file (or what you named your answer file) and add or change the following sections:

  [MassStorageDrivers]
  "Intel(r) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M)" = oem

  [OEMBootFiles]
  iaAhci.cat
  iaAhci.inf
  iastor.cat
  iastor.inf
  iastor.sys
  License.txt
  Readme.txt
  Txtsetup.OEM

  If you have any questions do not hesitate!

• Satellite Pro A200 cannot install the driver of storage on an unattended installation

  Hello

  I created an image of XP RIS for a Toshiba Satellite Pro A200 and have downloaded the correct drivers for this laptop.

  I scoured internet solutions on how to configure the .sif file and where to install this driver on the image that he won't seek the intall the storage driver so that it can not find the Sata HD to install the image.

  Everyone knows that before and if so please could you point me in the right direction I've been struggling with this for a few days now!

  Thank you

  Hello

  You must include the SATA drivers.
  The SATA drivers are part of the Intel Matrix Storage Manager, which can be downloaded from the Intel and Toshiba page page.

  Here's a nice instruction how to do this:

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro A200-1 mn has sata controller OK needed for xp install

  Hello

  I thought that I had the correct file for my installation of xp on my floppy drive but windows setup cannot yet see my hard drive

  I do not have the recovery media so this problem

  Satellite Pro A200-1 mn
  PSAE4E-01R00WEN

  I like 82801 sata ahci controller and ich8m storage controller 2850

  It does not however love them, can anyone help?

  Hello

  In the Bios, you can set a, compatible, mode and try to install xp, then. Then, you can try reinstalling the sata drivers in win xp environment.

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• Re: Satellite Pro A200 - key stuck FN

  Hallo,

  I installed my vista Ultimate on my new Satellite Pro A200 but FN key does not work after you have installed the Package of added value (they work again after uninstallation). In addition to, there is an error of invalid series in support of cards Flash Utility Setup. Toshiba said, I need to get the Toshiba vista home system - I am not satisfied with this response.
  If there is one body, who have the selfextrated support of Flash Cards Utility Setup files?

  Another point: someone knows how to set properties of fan? The cooling system works too hard for a few seconds by the temperature of 33 ° C CPU. Is this software like SpeedFan or an upgrade of the BIOS is?

  Caio ~ Daniel

  Post edited by: ADMIN

  Hello Daniel

  I installed Windows Vista Ultimate on my Satellite A200 successfully several times. Can you please tell me what you do exactly? Did you CLEAN Ultimate installation or just the UPDATE to Vista Ultimate?

• Cannot install the update for Satellite Pro A200-E7E - bad series flash cards

  Hello

  I tried to install the utility to update the flash cards for Satellite Pro A200 E7E model and it will not complete installation, saying: wrong serial number.

  My model is without a doubt listed in the updated information, and it is available on the page of updates for my model.

  Help!

  Something similar has already been described here in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31779&TSTART=0

  Maybe you should check this!

• Satellite Pro A200 - Supervisor Password Setup Utility fails

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
  BIOS version is now 2.20 - WIN32

  After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.

  When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
  Same problem with a different Installer: "utility of Support Flash Cards.

  Someone knows how to solve this problem and what serial number is not valid?

  Thanks in advance,

  mme000

  Hello Hana

  If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.

  Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.

  By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article

  Good bye