Entry of data Mapper endpoint not created; Code of 1899

Similar Questions

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• Windows could not create an installation folder. Error code: 0x80070005

  I bought Windows 7 Ultimate and tried to install it.  I hit "custom" install because I wanted to start over completely and got this error message.

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions

  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.

  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f

  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f

  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f

  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f

  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f

  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f

  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================

  Completed @Echo.

  @Echo =========================

  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs

• Could not create the domain object type oracle.jbo.domain.Date

  Hello
  
  I'm getting the following exception in the user interface when I click on submit button (/ commit or any other button) for date fields. I created the default objects entity and notices for the database table. I'm poplating the data after executing the "Execute" operation on the iterator for the view.
  
  Cannot be created with the value ' 22/09/2009' field object type oracle.jbo.domain.Date. +
  
  Even if I had not made any changes to the date also fields, it's give the exception message in the user interface and do not return the form.
  
  Could you please help me to solve the issue.
  
  Thank you and best regards,
  
  S R Prasad
  
  Published by: oumar s Prasad on November 18, 2009 15:01

  Prasad,

  What is your version of JDev? And what technology do you use to model? BC4J? Can you try to change the format of the attribute in the object view? Say with the type of Simple date format and format "mm/dd/yyyy".

  Arun-

• Group data model does not

  Hello

  I am developing a revision update for my app BB10 stunts and I use a data model to pull in the elements of the application do not forget; the only problem I encounter is that I can't get the data model of the group work so that I can arrange the items by the first character instead the data are currently presented as Z - A, even if I could get it to display in A - Z would be enough, but what I am looking to achieve is to get the model to display in A - Z and then sort by the first character, while a header for each letter is displayed.

  Here is the list (QML) and my data model (C++)

  ListView {
                              dataModel: _noteBook.model
  
                              listItemComponents: ListItemComponent {
                                  type: "item"
  
                                  StandardListItem {
                                      title: ListItemData.title
                                      description: ListItemData.status
                                  }
                              }
  
                              onTriggered: {
                                  clearSelection()
                                  select(indexPath)
  
                                  _noteBook.setCurrentNote(indexPath)
  
                                  _noteBook.viewNote();
                                  navigationPane.push(noteViewer.createObject())
                              }
                          }
  

  NoteBook.cpp

  #include "NoteBook.hpp"
  
  #include "NoteEditor.hpp"
  #include "NoteViewer.hpp"
  
  #include 
  
  using namespace bb::cascades;
  using namespace bb::pim::notebook;
  
  //! [0]
  NoteBook::NoteBook(QObject *parent)
      : QObject(parent)
      , m_notebookService(new NotebookService(this))
      , m_model(new GroupDataModel(this))
      , m_noteViewer(new NoteViewer(m_notebookService, this))
      , m_noteEditor(new NoteEditor(m_notebookService, this))
  {
      // First Character grouping in data model
      m_model->setGrouping(ItemGrouping::FirstChar);
  
      // Ensure to invoke the filterNotes() method whenever a note has been added, changed or removed
      bool ok = connect(m_notebookService, SIGNAL(notebookEntriesAdded(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
      ok = connect(m_notebookService, SIGNAL(notebookEntriesUpdated(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
      ok = connect(m_notebookService, SIGNAL(notebookEntriesDeleted(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
  
      // Fill the data model with notes initially
      filterNotes();
  }
  //! [0]
  
  //! [1]
  void NoteBook::setCurrentNote(const QVariantList &indexPath)
  {
      // Extract the ID of the selected note from the model
      if (indexPath.isEmpty()) {
          m_currentNoteId = NotebookEntryId();
      } else {
          const QVariantMap entry = m_model->data(indexPath).toMap();
          m_currentNoteId = entry.value("noteId").value();
      }
  }
  //! [1]
  
  //! [2]
  void NoteBook::createNote()
  {
      // Prepare the note editor for creating a new note
      m_noteEditor->reset();
      m_noteEditor->setMode(NoteEditor::CreateMode);
  }
  //! [2]
  
  //! [3]
  void NoteBook::editNote()
  {
      // Prepare the note editor for editing the current note
      m_noteEditor->loadNote(m_currentNoteId);
      m_noteEditor->setMode(NoteEditor::EditMode);
  }
  //! [3]
  
  //! [4]
  void NoteBook::viewNote()
  {
      // Prepare the note viewer for displaying the current note
      m_noteViewer->setNoteId(m_currentNoteId);
  }
  //! [4]
  
  //! [5]
  void NoteBook::deleteNote()
  {
      m_notebookService->deleteNotebookEntry(m_currentNoteId);
  }
  //! [5]
  
  bb::cascades::GroupDataModel* NoteBook::model() const
  {
      return m_model;
  }
  
  QString NoteBook::filter() const
  {
      return m_filter;
  }
  
  //! [6]
  void NoteBook::setFilter(const QString &filter)
  {
      if (m_filter == filter)
          return;
  
      m_filter = filter;
      emit filterChanged();
  
      // Update the model now that the filter criterion has changed
      filterNotes();
  }
  //! [6]
  
  NoteViewer* NoteBook::noteViewer() const
  {
      return m_noteViewer;
  }
  
  NoteEditor* NoteBook::noteEditor() const
  {
      return m_noteEditor;
  }
  
  //! [7]
  void NoteBook::filterNotes()
  {
      NotebookEntryFilter filter;
  
      // Use the entered filter string as search string
      filter.setSearchString(m_filter);
  
      const QList notes = m_notebookService->notebookEntries(filter);
  
      // Clear the old note information from the model
      m_model->clear();
  
      // Iterate over the list of notes
      foreach (const NotebookEntry ¬e, notes) {
          // Copy the data into a model entry
          QVariantMap entry;
          entry["noteId"] = QVariant::fromValue(note.id());
          entry["title"] = note.title();
          entry["status"] = NoteViewer::statusToString(note.status());
  
          // Add the entry to the model
          m_model->insert(entry);
      }
  }
  //! [7]
  

  NoteBook.hpp

  /* Copyright (c) 2012, 2013  BlackBerry Limited.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  * http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
  
  #ifndef NOTEBOOK_HPP
  #define NOTEBOOK_HPP
  
  #include 
  #include 
  #include 
  
  #include 
  
  class NoteEditor;
  class NoteViewer;
  
  /**
   * @short The controller class that makes access to notes available to the UI.
   */
  //! [0]
  class NoteBook : public QObject
  {
      Q_OBJECT
  
      // The model that provides the filtered list of notes
      Q_PROPERTY(bb::cascades::GroupDataModel *model READ model CONSTANT);
  
      // The pattern to filter the list of notes
      Q_PROPERTY(QString filter READ filter WRITE setFilter NOTIFY filterChanged);
  
      // The viewer object for the current note
      Q_PROPERTY(NoteViewer* noteViewer READ noteViewer CONSTANT);
  
      // The editor object for the current note
      Q_PROPERTY(NoteEditor* noteEditor READ noteEditor CONSTANT);
  
  public:
      NoteBook(QObject *parent = 0);
  
  public Q_SLOTS:
      /**
       * Marks the note with the given @p indexPath as current.
       */
      void setCurrentNote(const QVariantList &indexPath);
  
      /**
       * Prepares the note editor to create a new note.
       */
      void createNote();
  
      /**
       * Prepares the note editor to edit the current note.
       */
      void editNote();
  
      /**
       * Prepares the note viewer to display the current note.
       */
      void viewNote();
  
      /**
       * Deletes the current note.
       */
      void deleteNote();
  
  Q_SIGNALS:
      // The change notification signal for the property
      void filterChanged();
  
  private Q_SLOTS:
      // Filters the notes in the model according to the filter property
      void filterNotes();
  
  private:
      // The accessor methods of the properties
      bb::cascades::GroupDataModel* model() const;
      QString filter() const;
      void setFilter(const QString &filter);
      NoteViewer* noteViewer() const;
      NoteEditor* noteEditor() const;
  
      // The central object to access the notebook service
      bb::pim::notebook::NotebookService* m_notebookService;
  
      // The property values
      bb::cascades::GroupDataModel* m_model;
      QString m_filter;
  
      // The controller object for viewing a note
      NoteViewer* m_noteViewer;
  
      // The controller object for editing a note
      NoteEditor* m_noteEditor;
  
      // The ID of the current note
      bb::pim::notebook::NotebookEntryId m_currentNoteId;
  };
  //! [0]
  
  #endif
  

  If something you can help me with then this would be very useful - if you need to see more of code then let me know too!

  Thanks in advance

  Try to add in constructor (after a call to setGrouping):

  QStringList keys;
  key<>
  m_model-> setSortingKeys (keys);

  May require alterations, I have not tried this compilation.

• Folders Inbox not created from the msf files

  Last week, I noticed that my files in the Inbox folder are not listed in my profile. I posted a question widespread here: https://support.mozilla.org/en-US/questions/996903

  The answer I received did not help that much. The folder I created appeared on the box remote mailbox as empty folders.

  My email account is synced via IMAP to a remote Zimbra messaging client using STARTTLS. I can view my Inbox. Other folders in my account of the Inbox are not visible. I can send and receive messages from my Inbox.

  When I select 'Manage folder subscriptions' in the account options, I can see the files. When I select them and click the 'Subscribe' button, nothing happens.
  Inspection of my IMAP directory, I see the following structure:

  ~.thunderbird/13zr0oo0.default/ImapMail/mail. < zimbra_account > .com:
  -rw - r - r - 1 Aamir Aamir 1238 2 May 10:38 Archives.msf
  -rw - r - r - 1 Aamir Aamir 1235 2 May 10:38 Drafts.msf
  -rw - 1 Aamir Aamir 47500385 2 May 09:56 Inbox
  -rw - r - r - 1 Aamir Aamir 375885 2 May 10:36 INBOX.msf
  -rw - r - r - 1 Aamir Aamir 25 May 2 08:58 msgFilterRules.dat
  -rw - r - r - 1 Aamir Aamir 1233 2 May 10:38 Sent.msf
  -rw - r - r - 1 Aamir Aamir 0 may 2 10:38 site - errors.msf
  -rw - r - r - 1 Aamir Aamir 0 2 May 09:59 Templates.msf
  -rw - r - r - 1 Aamir Aamir 2275 2 May 10:33 Trash.msf

  Msf files are created when I click on the 'Subscribe' button but subsequent Mail files containing the mail are not given (note that non - msf files exist only for "INBOX").
  Deleting the .msf files and restart Thunderbird has no effect.
  When I run the application, the error console reports the following three errors:

  "Could not read"file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest"chrome manifest.

  "- There is no chrome.manifest file in my system files under/usr/lib/thunderbird/extensions / {972ce4c6-7e08-4474-a285-3208198ce6fd}".

  "While the creation of the category 'Profile after change' services could not create service entry 'Disk Space Watcher Service', contract ID"@mozilla.org/toolkit/disk-space-watcher;1"

  This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and was set to https://bugzilla.mozilla.org/show_bug.cgi?id=895964 , but my system is always up to the error. (I have a lot of disk space. Permissions maybe?)

  [JavaScript warning: "calendar .com/calendar ' rel = 'nofollow' > https://mail.zimbrahostedemail.com/home/matthewe@ < zimbra_client > .com/Calendar has an identity that hang email configured.] »]

  I don't know what that means.

  I use Thunderbird on Ubuntu 13.10 24.5.0

  Was able to workaround: Server-> advanced settings, deselect the option "See her only subscribed folders" downloads everything. Good enough. I make it as a bug against Thunderbird 24.5.0 this does not happen with these 24.4.0 running

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows don't con not load drivers for 6 to 4 adaptorCode 31__Tun mimiport con adaptor\device not stsrt Code 10

  CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.

  Hello

  For the 6to4 card number, which is separate from the issue of the CD/DVD.

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
  computers, it will always be there but no problem to be expected.

  On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
  appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  ==============================================

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  If necessary:

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• -You also get an invalid identifier error when executing this query sql for a data model, but not in TOAD/SQL Developer?

  Hello OTN.

  I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.

  The query is:

  SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL

  
  

  Values of the variable:
  

  : P_MONTH = APRIL

  : P_YEAR = 2015

  I tried multiple variations and not had much luck. Here are the other options I've tried:

  WITH DATES AS

  (

  Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))

  'FEBRUARY', '02',.

  'MARCH', '03'.

  'APRIL', '04'

  'MAY', '05'.

  'JUNE', '06'.

  'JULY', '07',.

  'AUGUST', '08'.

  'SEPTEMBER', '09'.

  'OCTOBER', '10',.

  'NOVEMBER', '11'.

  "DECEMBER", "12."

  '01')) as mth_nbr

  of the double

  )

  SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")

  OF DATES

  SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL

  I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.

  Best regards

  -Konrad

  So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.

  Here's how I solved my problem.

  I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.

  Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)

  After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.

  In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.

  It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.

  See you soon.

• Union - generator of grid view layout query error could not create the checkerboard to correct view

  I get the error while I'm trying to run a simple union query below. The query uses simple areas. I use columns the same type of data in the same order in each of the areas and when I run the sql generated backend query, it returns the correct result. Only in obiee front end, it is not showing any result but giving the below error instead. I use version 11.1.1.6.8 Please help!

  The presentation view grid generator could not create the checkerboard to correct view. It lacked the logical column with the following ID: c6d9af7a1de3ca97a.

  Error details

  Error codes: WUSYDB5K

  Geographical area: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.

  handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads

  This is a bug, you must connect your environment to min 11.1.1.6.10 max 11.1.1.6.12/11.1.1.7.x

• Google Analytics can provide reports and data from a form created in Muse?

  My Muse site will be held by a third-party free image host, as I am creating a new customer. My client wants to be able to see a monthly report of inquiries submitted through the contact form, which was established in Muse. Google Analytics can provide reports and data from a form created in Muse?

  Muse done files through the interface design approach. It actually has nothing to do with the operation of your site. And this forum is for Business Catalyst, Adobe CMS. And if you use not only a 3rd party then for monitoring etc. based on you or someone another installation the analytical code of google on this Web site. Muse has nothing to do with it.

  Here is the departure of google for this guide.

  http://www.Google.com/intl/en-AU/Analytics/learn/setupchecklist.html