ENVY 14-1190ea and the wireless installation

Similar Questions

• Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation?

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  original title: 32-bit to 64-bit XP upgrade

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  Sorry, but no, you can't. A new installation is required.

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• Problems with the sound button and the wireless button

  I have a computer laptop dv6-2155dx, and he has a problem with the sound, the button bar button and the wireless button, all of them continue to work, I do not know if I made a mistake and let them turn off or there is another way to get available.

  I need some advice.

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.

  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.

  3 reconnect the power adapter (do not connect the battery), press the power button

  Verification is your problem is resolved or not.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• get the status of 4500 printer wireless hp envy line after changing the wireless router.

  I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• HP computer laptop 15-afl54sa: network card for computer HP laptop and the wireless adapter drivers

  Hello

  My name is Andrew and I currently installed the operating system windows 7 on my HP laptop. However, I'm unable to connect to internet via cable and wifi network. I have included all of the hardware ID and my computer laptop make and model below.  Is it not possible for a technician to send me the links required for these special as soon as POSSIBLE drivers. Thank you very much.

  15 - afl54sa
  
  Laptop
  
  [Personal information]
  
  N7J75EA #ABU

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C & REV_07
  
  
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_020000
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  
  PCI\VEN_14E4 & DEV_4365 & CC_0280
  
  
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  
  PCI\VEN_1022 & DEV_1537 & CC_108000
  
  PCI\VEN_1022 & DEV_1537 & CC_1080
  
  
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C & REV_42
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  
  PCI\VEN_1022 & DEV_780B & CC_0C05
  
  
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C & REV_11
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  
  PCI\VEN_1022 & DEV_7814 & CC_0C03
  
  
  
  ACPI\SMB0001
  
  * SMB0001
  
  
  
  ACPI\MSFT0101
  
  * MSFT0101

  Hello:

  It is a model that is difficult to install W7 on.

  See if these drivers work...

  PCI\VEN_1022 & DEV_780B install this driver first and then restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  PCI\VEN_1022 & DEV_7814 installation of these drivers and reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058#tab1

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150879_1

  PCI\VEN_10EC & DEV_8136:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_148639_1&swEnvOid=4063

  PCI\VEN_14E4 & DEV_4365:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_151873_1&swEnvOid=4063

  You will also need driver bluetooth for this card template...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155436_1

  PCI\VEN_1022 & DEV_1537: This driver may need to be manually installed.

  Download and run this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_153451_1

  If it does not automatically install unit above, go to Device Manager and click the controller PCI E/D who need driver.  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp72675.   Make sure that the include subfolders is selected and the driver should install.  Then restart.

  ACPI\SMB000:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_154783_1&swEnvOid=4063

  ACPI\MSFT0101: There is no W7 drivers for this device because it is only used for certain security features that can't be find in W8.1 and W10.  W8.1 and W10 were the drivers for this device included with the operating system.

  Some books of class cases may have a BIOS setting to disable this security feature, but I doubt that yours is.

  No no not this installed device will have no negative impact on your PC.

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• F11 key does not not in windows 7 - have the keyboard and the wireless mouse

  I had problems with my computer HP not recognize my second USB (:) drive J.  I called HP and the last thing said the tech support person had to restart and use the F11 key as soon as POSSIBLE.  I tried for 90 minutes, get the f11 key to work with absolutely no luck.  What is the wireless component which is too slow and I need a wired mouse and keyboard to "beat the clock"?  My f11 key invalid?

  There is practically no time to go into the system diagnostics no matter how long my fingers type.

  Well, honestly I don't know why he asked you to press F11, is perhaps just a key that will work for HP computers.

  Most computer manufacturers use generally:
  -F2 to access the BIOS Setup
  -F10 - F8 to access the list of available boot devices. Example CD, hard drive, USB etc.
  -F8 is for menu of boot loader Windows, where you can choose to start mode without failure, mode safe mode with networking, safe mode with command prompt... etc.
  -Check if you have a KEY named F-Lock on your keyboard.
  -During the reboot, press Caps Lock funct - and then try pressing F11.
  Sometimes this worked for me, in my case, I have a MS ergonomic keyboard which contains an F-Lock to enable and disable F keys.
  I hope that this help, my apologies for not having more information.

• By default and the default installation path

  Should I use best practices in default installation of MS Office and other programs path because my company uses the directory default for MS Office installation and other programs? The default path points or C:\Program Files (x 86) C:\Program but my company created a new folder directory outside the Program Files directories for several executable programs. Let me know that my company should follow best practices to avoid the mess of the operating system?

  Typically, you leave the default installation path is.

  Show you the paths are for 64 bit & 32 bit programs, more often that it is senseless to do otherwise.

  And if you talk to a separate partition/drive programs usually function properly, or not at all, if installed on other than the partition Win

• Presario R3000 (R3200?) and the wireless USB mouse

  I have a Presario R3000 (or, perhaps, R3200) bought at Office Depot ages ago...

  Also, for centuries, I used a mouse Microsoft usb/wireless.  This mouse is connected through a hub USB of TrendNet.

  Suddenly, a few days ago the mouse is not responding.

  I tried to uninstall/reinstall the drivers, peripheral and even tried a BIOS flash, nothing helps.

  Here's what's weird:

  (1) a WIRED USB mouse will work, without any problem, in the same usb ports that the Wireless does NOT work in (I try all 3 ports of the laptop and those on the hub, in all of this).

  (2) the mouse (and the replacement, I bought, thinking that my mouse is dead) appear correctly in Device Manager - they just do not respond to the movement.

  What is a USB problem?  A power USB problem?  A Windows XP (pro, R2) problem?  A motherboard problem?

  I have no idea where to continue troubleshooting...

  Thank you

  EM

  It may be a stupid question but... you did not put fresh batteries in the mouse, have you tried new batteries?

• Satellite L300-1AQ - password utility and the Firmware installation problem

  Hello

  I recently reinstalled Vista after the first crash, then installation of linux.
  Now I installed most of the services Toshiba back packages on my laptop Sat L300-1AQ but firmware and password utilities are not installing back.

  Watch firmware available target error message is not available.
  Utility password displays the serial number is not correct.
  do not understand why these error messages come and how I can deal with that.

  Thank you

  Year s

  Hello

  Firmware update should only be done if you notice problems with the ODD (CD/DVD drive)
  In addition the laptop was equipped with various drives and firmware on the Toshiba page seems to be designed only for some some sides.
  So if the laptop uses other ODD then the update of the firmware would not be supported.
  See more information on the driver page for some details on the update firmware and what are the chances are supported!

  I m not very well why the t supervisor password utility could not be installed, but I think that the message: bad series appears that if you tried to install a tool that was not designed for this model of laptop or the operating system.

  The L300-1AQ seems to belong to the series PSLB8E and you must ensure that you have chosen the right model on the driver page.

  PS: don't forget that the VAP has been installed everything first!

• EliteBook 8470p: Elitebook 8470p and the wireless module

  Hello.

  I installed the card wwan (DW5550) Ericsson F5521gw of dell-branded.

  But at startup I get the error message: "unsupported... wireless module. "WWAN Module ID (703).

  Can I buy and use the same marked hp Ericsson F5521gw (hs2340 HSPA +) card with my laptop?

  Or how to determine what wwan modules are suspported by my laptop model.

  Please let me know.

  Thank you.

  @just42na

  These are your options.

  HSPA + Module ADSL Mobile HP 710788-001 Hs2350

  HP un2430 EV-DO/HSPA Mini Card 702080-001

  HP un2430 EV-DO/HSPA Mini Card 702080-001

  Un2430 EV-DO/HSPA Mobile Broadband Module HP 634400-001

  When ordering make sure you use the HP part number.

  Your manual here.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03659338-3.PDF

  HP EliteBook notebook PC - videos to remove/replace 8470

  http://h20464.www2.HP.com/results.htm?SID=5212907&MEID=8E1D5919-9C9D-416A-AB8A-1B5F6B405470

  REO

• HP dv6 Envy: how to stop the automatic installation of 8.1 to win on HP Envy laptop?

  My laptop HP Envy has automatic update downloaded to Win 8.1. He saysit will install on the next reboot. How to stop this instsall?

  PSKROBACK wrote:
  

  I didn't upgrade because I read several reviews that said if you didn't have a touch screen that you would have difficulties to navigation in some applications. What apps not said.

  What you say makes no sense and I question the validity of these comments.  Update to Windows 8.1 will do more good than harm.  Very few people who have updated have experienced problems, so comments to keep your receipt no logic.

  Here's something you can do.  Download Macrium reflect free and create a hard disk image on an external hard drive, don't forget to create the rescue disk.  Once done, update your system to 8.1.  If you have any problems, then you will be OK.  If it doesn't work or you have problems you can restore the backup of the image on your system that will put the computer to Windows 8 with no ill effects.  An image backup of your system from time to time is the best thing you can do.  You will have no problems with the help of recovery disks, reinstalling programs and data.  Many people use this method and have no regrets.

  http://www.Macrium.com/reflectfree.aspx

  Don't be afraid of it, it is a very useful tool.