Envy 14-K074CA touchscreen: 10 - touchscreen Windows Envy 14-k074ca

Similar Questions

• How to activate the stylus and touchscreen Windows 7?

  How to activate the stylus and touch in windows 7? If it displays "no net and enter key is available for this view.

  Please tell me from the beginning on this topic...

  If this screen does not have a sensor to detect the pens or touch, you need to go buy a new touchscreen compatible.

  But if it worked before, then you probably have a driver installed.  Go to the website of the company that builds your screen, and search for downloads.

• HP TouchSmart IQ540uk touchscreen windows 7

  Hello

  I have HP TouchSmart IQ540uk, Windows 7 64-bit operating system and I cannot calibrate touch screen. Do I need a driver or it should work after installing Windows 7. I tried Windows calibration (Tablet PC settings and calibrate) but when I touch the first cross I don't hear beep, when I touch in the form of cross beeps. The same story with NextWindows (The Windows 7 Touch Screen (ver 1.3.4.1) pilot) and the NextWindow Touch + application Version 2.9 on some calibration points is no beeps on the other is ok, never beeps on the first point of calibration, second is good, but a 3rd don't beep again. I don't know I have bad screen or I need the software and additional drivers?

  Please help me

  Windows 7 supports TouchSmart iq540 but my is defective. I tested and works without a problem on the other.

• Need a driver for touchscreen Windows 8 for TouchSmart 520-1240ea

  I bought this PC new HP with Windows 7

  Upgrade to Windows 8

  HP haven't released a Windows 8 pilot for him.

  Help!

  Hello

  Please check this site

  Software downloads & Driver - HP TouchSmart 520-1240ea desktop PC

  Select the Option "driver - keyboard, mouse and input devices" and "NextWindow Touch Screen Driver Update".

  I know it says "Update", but try and apply this mixture to see if it works. If not, let me know as well as the product number of your touch screen which can be found here (IMP).

• Touchscreen, Windows 7, Acer Aspire 7741z-5731

  Hello

  My Acer said it has a capacity of "multi-geste", but is unable to implement this function.  Went into the control panel and else where directed by Windows to put in place and have not yet found a solution.

  Anyone know what I need to do to enable the multi gesture with Windows 7 on my Aspire 7741z-5731 feature?  driving me crazy.

  THS.

  Hello

  To learn more about the multi gesture ability in you Acer click the link below,
  http://us.Acer.com/showrooms/touch/touchpad.html

  For further assistance, I suggest you to contact Acer support.
  http://support.Acer.com/us/en/default.aspx

• Sony VAIO VPCJ111FX touchscreen not detected after installed Windows 8.1 (clean)

  I had to install the new hard drive in my Vaio, needless to say due install the new OS... Figured since it's touchscreen Windows 8.1 would be the way to go.  Yes, well now a my touch screen does NOT work!  What is the problem with that?

  Sony VAIO VPCJ111FX

  8.1 Windows x 64-bit

  500 GB HDD SATA/7200 RPM/MIN/32 MB cache

  p. s.

  YES, it IS a touch screen!

  Hi DCwell1977, while they inspected the drivers of this model, it seems that this unit doesn't have drivers available for Windows 8.1. You can also visit this link and check the compatibility of this model to Windows 8.1. It's not necessarily you cannot upgrade to Windows 8.1, but we cannot guarantee that all the features of this unit will work.

  If my post answered your question, please mark it as "accept as a Solution.

  bit.LY/LapMagWin

• Touchscreen driver update problem

  So, I have a HP tm2t touchscreen, Windows 7. Everything works fine, except for the button; is not serious if I try to touch it with your finger or the stylus, it wouldn't recognize it. I tried all the stuff mentioned in other articles, still does not not + if I want to update the driver (Control Panel-> hardware and sound-> Pen Tablet properties-> download driver update), a windows pops up saying "windows cannot find ' @C:\Program c:." Make sure you typed the name correctly and then try again."

  For a few days, whenever I open the VLC Player, he'd say the operation has failed, and I should update the driver of the touch screen. However, everything would work ok if I was just opening it again. Then, Windows did some updates and option of touch screen of the laptop works with no possibility to update its drivers.

  No changes were made to the system until the problems.

  Don't know what to do?

  I'm not sure of the right reason why it would not properly work in a note only.

  Now that the digitizer has started working in Word 2010, I suggest try reinstall Office 2010 to solve the problem with a single note.

• Using the touch screen and the touch pad at the same time on Windows 8

  How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

  Help, please!

  Hello green,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your PC Acer laptop?

  Thank you for your query details.

  I also like the fact that you want to use the touch screen and press the key at the same time.

  Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
  Reference:
  With the help of a precision touchpad
  http://Windows.Microsoft.com/en-us/Windows-8/touchpad

  You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP envy m6 touchscreen does not work in windows 8.1

  Hello! Yesterday I updated windows 8.1 after updating my touchscreen was working while my graphics drivers were not installed and after I installed my INTEL HD GRAPHICS card in my laptop HP - ENVY TOUCHSMART M6 and transformed to I just turned on after 16 hours and try to use the touch screen, but it does not work in 'This PC' properties he showed "no pen or enter key is available for this view" is it Please help me how to repair the.

  Open the HP support assistant. Select the section drivers and updates. As long as the drivers are available and you have an internet connection that the HPSA should automatically find, download and install the drivers for you. The following images show how the updates have been installed to my current loan from the HP spectrum XTTouchSmart 13-3000 CTO ultrabook product.  It was quick and painless.

  

  

  

• touch screen works not (windows8)

  I can't find a driver to update my touch screen. Since I put windows 8 on my all in one pc, the option of touch screen does not work. When I search for a touchscreen Windows driver, what it says that it cannot find an and to go to the site (which is hp) and watch. I've looked everywhere for a way to solve this problem. Any ideas out there for me? Help, please!

  Hello

  I had the same problem when I upgraded my TouchSmart 320-1030. I got the touch screen works in this way:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click on the touch screen driver (in my case, Voltron NextWindow touch screen - your driver may be different).
  5. Right click and select Disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  Another option:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to display adapters to expand the list.
  4. Click the driver.
  5. Right click and select Disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the driver.

  Another thing: I had to reinstall the NextWindow Voltron touchscreen. I went to HP drivers and downloads page, download the WINDOWS 7 driver, which was under pilot - Original.

• glass screen touch tx2510au

  Hello

  I work with a Pavilion TX2510au and touchscreen window was broken so the owner took somewhere and they began the withdrawal of the broken touch screen. When they were not able to correct the situation, what he brought to the original touchscreen glass and me was missing. I have a brand new LCD and digitizer, but with the configuration that I have, I'm not sure if the original touch screen glass is the version 4-wire or wire 8.

  Is there a simple way to find out what version of this laptop and digitizer uses?

  Thank you

  Thank you for your help, I will use this to find out why this thing all of a sudden now beeps constantly until windows rises.

  Thanks again for your help I should be able to fix this pc now for the owner.

• HP pavilion 14-n019se used completely shut down.

  Pavilion HP 14 with touchscreen Windows 8 whenever I press the button to turn off the screen go but keep turning on the power button and the fan too, I waited about 5 hour nothing happen I reformatted and I got the same result, updated to 8.1 and I tried the latest version of the driver from the hp website same result, I thought it was a hardware problem, so I tried to install win 7, it worked perfect.
  
  Note that I had a lot of problem with the ati driver installation for windows 8.1 of the HP site it does not recognize the graphics card, so I installed the driver of ati 14.4 mobility. and I got the last update of the bios.
  
  anyone has any ideas to solve this problem.

  Found a solution, press SHIFT and select stop work like a charm.

• What MacBook Pro to get?

  I'll trade my Sony Vaio Fit 2011 (touchscreen, windows 10, 12 GB of RAM, 1 TB HDD, third generation i7) to a MacBook Pro, and I had two choices. A MacBook Pro from early 2013 with 8 GB of RAM and 256 GB SSD or a MacBook Pro of end of 2013 with 4 GB of RAM and 128 GB SSD. Which one do you recommend me to get? It will be my first Mac and I'm a little excited, I study electrical engineering and I need to use simulation of circuit and planning programs to install 10 Windows with Boot Camp. Just have a few days to decide. Thank you very much.

  No doubt the beginning 2013 with 8 GB of RAM and a 256 GB SSD.

  You don't want anything less than 8 GB of RAM.   The RAM is the only selling point, you will not be able to upgrade.

  The storage can be user upgraded to this model of the retina, but will break your warranty 1 year.

  in car-internal-Flash http://eshop.MacSales.com/Shop/SSD/OWC/air-Retina/Apple-MacBook-Pro-Retina-2012-

  MacBook Pro (15-inch mid-2012), OS X El Capitan (10.11.1), 480 GB SSD 16 GB RAM iPhone5 iOS9.1, Parallels10.0.2 i7

• Touch screen has stopped working - HP Pavilion 23 all-in-one

  Touch screen no longer responds to any contact afer 9 months use.    Details of the said system - touch compatible HID "this device works correctly.

  Hi JohnSevenoaks,

  Welcome to the HP Forums!

  I read your post on how your touchscreen no longer work, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • What version of Windows you have installed on your computer?
  • Have you installed a new software or hardware on your computer recently?
  • Has your computer has completed its important Windows updates?

  In the meantime, please follow this document on the HP TouchSmart PC - troubleshooting problems of touchscreen Windows 7 or for Windows 8. This should help to determine if the problem is software or hardware related.

  Please re-post with the results of your troubleshooting, as well as the requested information. I look forward to your reply!

  See you soon!

• Using Lenovo C540 all-in-one as a second screen

  I recently bought two computers, a laptop Asus desktop Lenovo C540 all-in-One touchscreen, Windows 8 and Windows touch, 8.

  The issue I'm facing is to attempt to use the Lenovo as the 2nd screen to the laptop. Is this possible with an all-in-one device since it is not a stand-alone monitor? If so, how would I go on this subject?

  I tried just to plug in an HDMI cable between the two and go in the options screen 2, but which have resulted in nothing.

  Hi Bushy808,

  Welcome to the Community Forums of Lenovo!

  I checked the C540 details and the HDMI on the back is only for HDMI output

  The unit is has a HDMI to display an external device on its screen.

  

  Best regards

  Solid Cruver