ENVY 14 realtek wifi adapter will "hibernation mode".

Similar Questions

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• HP 450-a120 slim desktop - 8188EE Realtek wifi adapter

  The system is around the age of six months.

  All wifi networks disappeared so that any piece of evidence in the Win10 that there was any installed wifi hardware.

  Do you have the normal operation of the system and router without result.

  Since it was under warranty, has taken to the seller.  Worked very well and when I went back to the House.

  My conclusion is an intermittent short circuit on the system board.  It's a plugin module that can be replaced?

  I can't find any kind of card schematic useful system on the HP support site.

  Hi there @MichaelShores,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you suspect an intermittent connection is at the origin of the problems of WiFi at home. I'm happy to help you with this.

  Looking at the HP Slimline 450 - a120 Desktop PC product specifications, the wireless connection is provided by the PCI express mini half-length card below.

  

  With the power off and unplugged unit, you could try to remove and then insert the card again once, to see if that helps.

  If there is no change, then try this interactive troubleshooting: HP PC - wireless network and Internet troubleshooting

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• BT not detected after update BIOS and windows 8.1 & wifi adapter with envy J000 Touch series (J001tx)

  Hi, I have an Envy Touchsmart J001 TX laptop.  I've upgraded to 8.1 Windows a few days back and my pc was working fine. Yesterday, my WIFI and Bluetooth stopped being detected.

  I checked Device Manager and it does not show the adapters. My system has BT Ralink and Realtek wifi b/g/n.

  Restart the system, WiFI present themselves and worked normally, but on next reboot disappeared again.

  The physical plane mode button is orange and pressing or off change in the status of shows like airplane on or off but the notification area icon mode shows no change.

  The network and sharing Center shows not router WIFI in the settings of the card and even the menu of configuration of Windows 8 don't tell no detected wirelessadapter.

  I've updated my drivers and even my BIOS. Earlier I got the version of BIOS INSYDE F.24 and current installed BIOS is INSYDE F.53. Here is the log file in the folder SWsetup containing the unzipped BIOS file. I think that the BIOS is not installed correctly. Please analyze the log file and do not tell if you see something wrong.

  Has anyone else had a similar problem with the update of the BIOS, or with WIFI after Win 8.1 update?

  -Log started: 2014/04/16 19:50:11
  Initializing...
  Log file: c:\SWSetup\SP65654\InsydeFlash.Log
  Settings file: c:\SWSetup\SP65654\platform.ini (found)
  Executable: c:\SWSetup\SP65654\InsydeFlash.exe
  Version: 4.5.6.1 build: InsydeFlash
  Date: Mon 21 Oct 13:11:30 2013

  Resource file: c:\SWSetup\SP65654\iscflash.dll (load)
  Application name: InsydesFlash
  Information of the operating system: Microsoft Windows 8 - supported
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  IHISI Version: 204
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  M - FD has achieved:
  01966.FD
  Offset: 7380688
  Allow Version: 000, Dex: 0
  Current version: F.24, Dex: 3876
  Current BIOS version is greater than the version installed in the Ini.
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  M - FD has achieved:
  01966.FD
  Allow Version: 000, Dex: 0
  Current version: F.24, Dex: 3876
  Current BIOS version is greater than the version installed in the Ini.
  Partition: 1 WMI 0x0D: 1
  Check the package: 1
  Sign of the BIOS: 1
  BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
  Sign of the file: 1
  Open file c:\SWSetup\SP65654\01966.fd
  No sign of present
  Reading 8388608 bytes of the file starting with 0...
  The BIOS image size: 8388608 (0 x 00800000)
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
  non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

  Preparation stage

  Error code: 3010 (0x00000BC2)
  Cleanup phase
  Step completed
  -Newspaper arrested: 2014/04/16 19:50:55

  -Log started: 2014/04/17 22:05:35
  Initializing...
  Log file: C:\SWSetup\SP65654\InsydeFlash.Log
  Settings file: C:\SWSetup\SP65654\platform.ini (found)
  Executable: C:\SWSetup\SP65654\InsydeFlash.exe
  Version: 4.5.6.1 build: InsydeFlash
  Date: Mon 21 Oct 13:11:30 2013

  Resource file: C:\SWSetup\SP65654\iscflash.dll (load)
  Application name: InsydesFlash
  Information of the operating system: Microsoft Windows 8 - supported
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  IHISI Version: 204
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  M - FD has achieved:
  01966.FD
  Offset: 7380688
  Allow Version: 000, Dex: 0
  Current version: F.53, Dex: 3923
  Current BIOS version is greater than the version installed in the Ini.
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  M - FD has achieved:
  01966.FD
  Allow Version: 000, Dex: 0
  Current version: F.53, Dex: 3923
  Current BIOS version is greater than the version installed in the Ini.
  Partition: 1 WMI 0x0D: 1
  Check the package: 1
  Sign of the BIOS: 1
  BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
  Sign of the file: 1
  Open the file C:\SWSetup\SP65654\01966.fd
  No sign of present
  Reading 8388608 bytes of the file starting with 0...
  The BIOS image size: 8388608 (0 x 00800000)
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
  non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

  Preparation stage

  Error code: 3010 (0x00000BC2)
  Cleanup phase
  Step completed
  -Newspaper arrested: 2014/04/17 22:06:11

  Problem solved with the permission of edsilha response: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Wireless-button-stays-orange-Will-not-turn-on/m-p/914285

  HP technical support comes to walk me through the resolution of this problem.

  1. remove the battery and unplug the power supply

  2. press and hold the power on button for 30 seconds

  3. allow battery but to plug the power unit in

  4. Press power button, then press the f10 key immediately (a number of times)

  5. the bios Setup menu appears

  6. select Reset default values

  7. Select Save and exit

  System boots and the wifi key changes from orange to blue

• ENVY 15 j040el (Italy): replacement/upgrade for RALINK RT 3290 wifi adapter

  My RT 3290 RALINK wifi adapter supplied with HP ENVY 15 Notebook j040el (bought in Italy in 2013) has stopped working.  I got to know of it when all of a sudden I couldn't access the internet more but my Tablet worked fine, so no fault of my ISP.   Fortunately I had at hand a USB wifi adapter to my office, and in him reconnect the wifi was back.  So my RALINK RT 3290 went for sure. Unfortunately, my warranty expired last year, and I can't ask for a free replacement of HP.   There is no RALINK RT 3290 on Amazon Italy.   I've seen a few complaints about the RALINK RT 3290 performance on the forum.

  1 can one suggest a good compatible replacement or upgrade?

  2 HP suggest a compatible replacement? How? Where?

  Laptop model: HP ENVY 15 j040el

  Country: Italy

  OS: Windows 8.1 (64-bit)

  Processor: Intel core i7-4700MQ, 2.40 gHz

  RAM: 12 GB

  HARD drive: 1 TB

  Warranty: due September 2014.

  The module that I suggested is compatible. It is the same physical size and has 2 antenna connectors it will be a matter of popping the old and jump into the new and replace the son, and then to load the driver. I don't know how you burn a wifi card but I mean it is also dual-band 2.4 and 5 ghz 7260 AC if that is a problem for you maybe, my advice would be different.

  2 x 2 vs 1 x 1 designates the number of streams from radio to the card. 2 x 2 is better.

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite P100 will not stay in hibernation mode

  Hi everyone ~.

  Satellite P100
  Vista

  Before going to bed, in that I always put my computer in hibernation. He won't stay in hibernation mode. I don't know fashion 'sleep' here.
  I click on the Start button and then choose put into hibernation. It goes into hibernation and I go to bed, so I don't know when it will come out of hibernation.

  I used to have to press the power button, get up and running after his hibernation. Along the front of the computer are 5 blue lights. I'll call them a, b, c, d and e.

  d & e are usually off when I use the computer.

  a, b, and c are on when I'm on the computer. When it goes into hibernation mode b turns off.

  When I get up in the morning a, b and c are all back on and everything that I have to do is move my mouse around then newspaper instead of the first press of the power button.
  I have a few scheduled tasks, but I've always had people.

  Help, please. Is there a setting that I can do to take care of this problem? TIA

  Hello

  Have you noticed the same thing with the mode sleep too?

  Anyway, check it please Windows Update option and disable it. Click the settings (left) and make sure that the first option install updated is automatically disabled. Maybe your laptop starts each day at a time and try to do the update of audit.

  Test it!

• HP Envy WIFI printer will not install

  HP ENVY WIFI printer will be installed on my laptop... tells me it cannot install a driver for it?

  Hello

  You put a serial number of the printer here, not a model number of the printer

  Access the site of HP drivers at this link > put in the full printer model number > select your operating system > find the right drivers > download and install following the instructions from HP that you may find.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• Vista will not wake up out of the hibernation mode, reboot

  Running Vista Home Premium with Service Pack 2... computer goes into hibernation mode after some time and he doesn't wake up.  It is used to show me the office, or that has never been open for a second, then return empty.  I used to be able to hit CTRL Alt Delete, then cancel and everything would be fine.  Now, I have to hard reboot.  I can force the issue with Ctrl alt del and then by selecting Hibernate.   It very well when I force the sleep.

  No error codes, etc.

  Help!

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Want to M6 1225DX: updated HP Envy M6 1225DX wireless adapter

  I'm looking to upgrade the card wireless in my HP Envy M6 1225DX.  Here are a few features on the machine:

  Product # D1E93UA #ABA

  CPU: Intel i5 - 3230M @ 2.6GHz

  RAM: 8 GB DDR3 SDRAM

  GPU: Intel HD graphics 4000

  Wireless: Ralink RT5390R 802.11bgn Wifi adapter

  OS: Windows 7 x 64 (I know that HP does not support this)

  BIOS version: F.26

  The wireless adapter that is currently installed (Ralink RT5390R) only supports SISO and the download speed tops out around 18-20Mbps.  I'm looking to replace this card with a card compatible MIMO and bluetooth, for example a 7260 Intel.

  I read on several forums that HP basically whitelists some cards wireless in BIOS.  I have reviewed the maintenance manual and it has a list of compatible cards I listed below:

  • Atheros WiFi 802.11b/g/n 1 × 1 9485GN and 3012 adapter Bluetooth 4.0
  • Atheros 802.11b/g/n 1 × 1 Bluetooth adapter Combo WB225
  • Broadcom 4313GN 1 × 1 WiFi and Bluetooth 4.0 adapter 802.11b/g/n 20702
  • Module Intel Centrino Advanced-N WLAN 6230
  • MediaTek MT7630E 802.11bgn Wi - Fi adapter and adapter Mediatek Bluetooth 4.0
  • 1 × 1 Ralink RT5390R 802.11b/g/n WiFi adapter
  • RALink RT3290LE 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 690020-001 1 × 1
  • Atheros AR9565 1 × 1 WiFi + Bluetooth 4.0 Combo Adapter 802.11b/g/n
  • Module Intel Centrino Advanced-N 6235 WLAN for the Japan only

  These are the only cards I can run in this machine?  I also read somewhere that HP no wireless adapter like whitelisting in the BIOS, and if that's the case, would a BIOS update fixed this problem?

  I've been watching the 7260 Intel, but I don't know if it would work and would not order it and he has no job.   This adapter could work in this phone or I am I'm confined to the list given in the service manual?  If I'm limited to the above list, no matter what recommendatins to the adapter that will give me what I'm looking for?

  Basically, what I'm looking for in a wireless adapter is:

  • Supports A/B/G/N and AC at 2.4 Ghz and 5.8 Ghz bands.
  • More high speed possible
  • Bluetooth 4.0
  • 1/2 height Mini PCIe form factor

  Thanks for the help

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6-1225dx HP ENVY Notebook and supported wireless cards. Yes, these are the cards that are supported in your notebook and fortunately will work with your graphics card and processor.  Some say that just restore BIOS to factory default help if you decide to go with your choice.

  You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

  Thank you.

• Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10

  Hi people,

  After updating the OS to Win7 x 64 to x 64 on a HP Pavilion G6 1245CE Win10, I have some difficulties with some hardware drivers. Most of the problems I could solve myself, but there are four material elements that continue to give errors, which I failed to solve by myself. These hardware problems also affect the ability to use internet (at least on WiFi) have this laptop, it is quite a big deal. I hope you can help me. I probably provide too much information below, but I think that at least the necessary information you need are there. I hope at least

  So can you help me solve the errors established below, so that I can at least use internet via WiFi again on this laptop?

  In Device Manager, I get the following errors and the info that seems worth sharing:

  Network cards--> Realtek PCIe FE Family Controller

  general tab:

  Device type: network adapters

  Manufacturer: Realtek

  Location: Bus 2 PCI, device 0, function 0

  State of the device: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  An object ID was not found in the file

  Events tab:

  Hello:

  Unfortunately, you will not get the Realtek RTL8188CE 802.11b/g/n WiFi Adapter to work on the Windows or Windows 10 8.1, so I can't help you with that.

  You can try the W10 drivers directly from the Realtek site for the ethernet controller and card reader.

  Ethernet controller... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader (PCI device)... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Because the wireless cannot work on W10, you may want to roll back to W7 in the 30 day period.

• HP envy x 2 wifi after sleep

  Hello

  I have a HP Envy X 2 g001-el Atom convertible netbook with detachable keyboard.

  upgrade to win8.1

  Home wifi network, it must 'autoconnect' to this network.

  The fact is that when I turn the laptop, plug in and working properly.

  Whenever I take the operating system (without turning it off), I have to disconnect and reconnect in the case otherwise it won't surf the web or any other task related to the internet.

  When this happens, if I'm going to nd command line, run the IPCONFIG command I see he has the right address IP/subnet mask and gateway

  Ping to the gateway gets timeout

  I think it's a driver problem, that's why I write under 'software '. Updated drivers.

  Thanks to everyone for help me, he is a stupid bug

  another small issue is that sometimes audio doesn't work and I have to restart

  time sometimes change by himself at odd hours

  the trackpad gestures works do not (this works in stain remover and reconnect the keyboard)...

  I can say that my first experience of hp isn't that exciting...

  Update:

  the problem is related to suspend the options and the wifi adapter. from the Panel, network card, chose the card, drivers and found an option called "wake up mode." Set it to 'none' and now it's working after sleep.

  We can say "resolved", although I think that a "tablet" or something similar must always be connected without having to seek solutions 'geek '...

• HP p077tx: missing in Device Manager Wifi adapter

  I have a HP p077tx laptop and it is under warranty.

  As for 2 months I have problems with wifi as my wifi adapter used will be unavailable after that I woke up my laptop from sleep. I mean the wifi was not simply disconnected, but there was no adpater wifi under the Device Manager list. Once I chose scan for hardware changes generally used to be back again.

  But last Wednesday, there just no and now it is gone forever. Tried rebooting several times which did not help of course.

  I thought the system restore using the windows system restore to a date before I had this problem. However, as the laptop starts again wifi was back and works normally as it used to. I have never put my laptop to sleep but just turned off. Next morning the wifi always worked and I thought that the problem has been resolved, but it was only before I put my phone back to sleep and later, he was gone.

  I also tried to remove the drivers installed for it programs and features, but it does not allow me to uninstall them and jumped an error saying that it cannot be deleted. \update 65.

  There is no option to uninstall the driver from Device Manager, as I said is not even appear in the list.

  So I tried to reset the laptop and it's same thing happened for a restoration of the system. After putting the laptop on standby it wasn't everything again.

  Help, please.

  Hello @ManjrekarOm,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!  I see that the problem seems to be related to when the laptop returns from Sleep Mode.

  First of all, try to review the following document and let me know how it goes:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.