Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10

Similar Questions

• Pavilion dv7 6c70el: drivers PCI and the Wifi network?

  Hello
  I recently formatted my laptop and when I reinstalled I noticed that I miss 2 pilots:

  -Wifi pilot
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  -Pci (maybe?)

  USB\VID_138A & PID_0018 & REV_0078
  USB\VID_138A & PID_0018

  Can someone help me?

  Hello:

  You need these drivers...

  WiFi:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_105197_1&swEnvOid=4058

  Fingerprint sensor...

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56169.exe

• Satellite C850 PSKC8E: WiFi does not work after upgrade to win 8

  I have improved my win 7 to win 8 and now wifi is not working on windows 8! Help me!

  I HAV Toshiba Satellite C850 PSKC8E

  What this means exactly: it does not work?
  Did you install Wlan driver?
  Wireless network card is recognized in Device Manager?
  Have you activated the Wlan before trying to use it?

• HP Pavilion dv7: RealTek Cardreader does not work after upgrade to Windows 10 10

  After the upgrade to Windows 10 64-bit of Windows 7 64-bit, the Realtek PCIE card reader does not work.  Device Manager showed initially a card reader driver error, but after the reboot, I can not find an error or the device itself.

  Any ideas would be apprieciated.

  Hello:

  See if the driver installation of W10 directly from Realtek card reader solves the problem.

  First driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Pavilion dv7 6166-nr: Synaptics TouchPad Enable/Disable light not working after upgrade to Windows 10

  TECHNICAL DATA:

  Name of the operating system Microsoft Windows 10 home
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name SUZANNES-PC
  System manufacturer Hewlett-Packard
  System model HP Pavilion dv7 Notebook PC
  System Type x 64-based PC
  SKU LW473UA #ABA system
  Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
  SMBIOS Version 2.7
  Embedded Controller Version 51,24 by action
  BIOS Legacy Mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  SUZANNES-PC\Suzanne username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 4.00 GB
  3.48 GB total physical memory
  2.03 GB available physical memory
  4.79 GB total virtual memory
  3.26 GB available virtual memory
  Page file space 1.31 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  NEWS OF SYNAPTICS:

  Material Type Synaptics TouchPad SMBus
  Number buttons 0
  Status OK
  ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
  Supported no power management
  Double-click the threshold is not available
  Handedness is not available
  IRQ channel, IRQ 12
  Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)

  PROBLEM:

  The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work.  I was wondering if there is a way to fix this, or there's someone else with this problem.

  OK, this can be marked RESOLVED.

  I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!

• Why my realtek rtl8188su has left work after upgrade to windows 7?

  I just put update vista to windows 7 pro, and during the updates, my realtek rtl8188ru wireless card stop working.  I drove back to before the last update, and it started working again.  What is the cause and how can I solve this problem?

  The first step is to remember the famous words of wisdom: If it ain't broke, don't fix it!

  The second step is to NEVER make an upgrade with anything that did not come from the manufacturer or a reliable source...

  As a general rule, it is best to install only the updates of the security. And you should always stay away from hardware (optional) on the Microsoft site drivers! Chances are the drivers that you are fine just the way they are. If you did not need to update, you should go to the manufacturer Web site the real to do.

  UTC/GMT is 04:14 on Wednesday, February 22, 2012

• WiFi does not work after upgrade W10 on qosmio x 770

  Hello
  I have a Toshiba Qosmio X 770 with windows7 64-bit
  Yesterday I updated to Windows 10
  and reboot I got a blue screen with the error: System thread exception unhandled (athwbx.sys)
  It restarts loop, I managed to locate the file (athwbx.sys) and disable it.
  The PC has restarted, but I don't have a wifi connection.

  Atheros AR9002WB-1NG wireless network adapter
  Driver version: 10.0.0.270

  Thank you for the help

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?84234

  He confirmed that Win 10 could pick up the driver update WLan automatic connection of the laptop to the internet using LAN.

  This should fix the WLan driver problem Win 10 running

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• Wifi button does not work after upgrade to windows 7 to windows 8

  Hi all

  I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

  Concerning

  Wandi

  Hello

  I use a hp pavilion dv6 7030ei.

  I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

  I have has been Manager of access devices, then selected, network adapters

  -Click with the right button on intel Centrino Wireless - N 2230,

  -then click on uninstall and then uninstall. Restarted my PC.

  Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

  Thank you all for your comments.

  Concerning

  One_D

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• HP Pavilion DV6: Wifi does not work after re-installation of Windows 7

  I recently had to format my drive and reinstall Windows 7, but after reinstalling, nothing really works.  USB is not recognized, Wifi is not working, etc...

  I realized that all new drivers need to be downloaded, but I can't find the original driver disc and it is difficult to download them without being able to go online.   I could find and install a driver for the network card ' Intel Centrino advanced n + WiMax 6150.  I can see that the driver is installed and up to date, but it is still not discover all networks and during troubleshooting, it says that no hardware installed.

  At this point I think maybe it's a hardware problem, but the wifi worked very well until I resett everything.  Anyone know what I can do?  Are there additional drivers, I need for the network card start work.

  Thank you

  Here is the link to the latest version of the driver for this card.

  A first or second on the list according to bit W7 version you have installed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23723

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• HP 255 G2 wifi don't work

  Hi, I buy the new G2 255 HP laptop and my wifi (F12) button is still orange, if I push him it is white for a while bluetooth turn on but wifi still not working and the button back to the orange. I don't see even in setings internet wifi. I tried to install the drivers for cards and everything I find on this forum but my wifi still doesn't work.

  I have win7.

  Serial number: [edited by Moderator]
  Product number: F0Z71EA

  PCIVEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  network controller show still no driver instaled

  I tried the drivers from the hp website

  Please help me and sorry for my English I never learned this language school. Thank you

  Hello:

  Your English is very good.

  Please see if this driver works for you.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130340_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• The input microphone and WEBCAM microphone don't work

  Hey.

  I'm on HP Pavilion dv6 1330-er.

  The problem is - my microphone and webcam microphone worked fine until this morning from yesterday. The night before I was talking with my friend on Skype and then went to sleep. When I woke up - input mic webcam and mic were not working.

  I use Windows 7 Ultimate x 64

  Nothing like this has happened before.

  Video webcam itself works very well. Headset works fine.
  Tried to reinstall the driver - didn't work.

  Laptop resting on the table, just as I left it in the evening

  Have 2 different windows installed on my laptop (the other is windows XP, not a single program installed, a few drivers) - microphones do not work.

  The microphone even on different PC works fine.
  The system detects the headset microphone and webcam microphone and the system shows when I take micro helmet inside and out.

  I have no idea what's wrong with audio input. Maybe you guys can help, thank you.

  Hi again toxyyy,

  Thanks for the quick response!

  According to the information provided in your post, I advise you to follow this document on the use of the Recovery Manager to restore the software and drivers (Windows 7). This should restore the drivers software and hardware of origin provided with your computer. Once the software installation is complete, please follow this document on using the HP Support Assistant to update your system drivers.

  For the component XP from your computer, I recommend later in this document on the no sound (Windows 98, ME and XP). This should help to restore the sound on the side of the XP for your operating system.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning