Envy 15 k200nw: decommissioning of k200nw HP Envy 15 Win10 for Win7 - need direction and drivers!

Similar Questions

• Envy 15 t-j100 Win7 need two remaining drivers downgrade

  I got just my Win8.1 OS to Win7 on my new Envy 15 t-j100 Touchsmart.  After several hours of poking around in this forum, I found all the drivers except two for the 802.11ac + BlueTooth car.  The info is as follows:

  BCM20702A0

  ------------------------

  USB\VID_0A5C & PID_21FB & REV_0112
  USB\VID_0A5C & PID_21FB

  Network controller

  -----------------------

  PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2154103C & REV_03
  PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2154103C
  PCI\VEN_14E4 & DEV_43B1 & CC_028000
  PCI\VEN_14E4 & DEV_43B1 & CC_0280

  I tried the driver on another topic for sp56403.exe, but it does not work - even tried to manually add the drivers into the management control panel - but it wouldn't start the map.  I REALLY need of these work as what is a wireless laptop.

  Thank you

  Bryan

  OK - I solved it finally - took the lid above the bottom of the computer and grabed the mini pci-e card numbers.  Did a search and here is the solution I used:

  BlueTooth:

  Download drivers Lenovo here

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS029104

  The installation will fall, but if you used the Manager device and the update drivers and point to which the extracted software it will install fine

  802.11AC

  Go to the ASUS here driver page:

  http://www.ASUS.com/Networking/PCEAC66/#support_Download_30

  Download driver ASUS PCE-AC66 6.30.95.26 file.  Extract the files and again use the Device Manager to update the drivers.

  Now, everything is fully functional under Windows 7.

  Thank you

  Bryan

• Downgrade HP Envy 15-k061 for Win7

  Hello.

  I just bought a HP envy 15-k061, and I'm not a big fan of windows 8.

  After some quick internet browsing that I realize downgrade might be easier said than done.

  If anyone would be able to post a simple recipe or got some tips no tips, I would be very gratefull =)

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer is not eligible for Microsoft's Downgrade rights. You can buy a copy of Windows 7 with a valid COA and the product key.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel SATA/RAID drivers at the moment... Download Intel RAID Intel® Rapid Storage Technology (Intel® RST) driver , if necessary.

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) please see the page of drivers PC laptop HP ENVY 15-k061no (assuming that the model is correct) for the most part, the 64 - bit Windows 7 drivers.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Envy 6-1155er for Win7

  Who can I install Win7 to this product? Are there any drivers for it under Win7?

  So, I delete all xxxx using PartitionMagic-> I can see RAID-> disable raid and vuala: I can install Win7 all the other tips do not work

• driver search for Hp envy 17 j108tx running win7 64-bit

  Hello

  I just changed the OS on my new Hp Envy win8.1 for win7 by following the instructions provided on other threads but cannot locate the last three drivers.

  The hardware id is the following

  BCM20702A0

  USB\VID_0A5C & PID_21FB & REV_0112
  USB\VID_0A5C & PID_21FB

  Net controller

  PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2154103C & REV_03
  PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2154103C
  PCI\VEN_14E4 & DEV_43B1 & CC_028000
  PCI\VEN_14E4 & DEV_43B1 & CC_0280

  Unknown device

  USB\VID_138A & PID_0050 & REV_0060
  USB\VID_138A & PID_0050

  Thank you for your help

  For network controller, this Broadcm should work:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  Validity Sensor:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64970.exe

  HP SimplePass Software:

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64339.exe

  For the Bluetooth it make be more complicated:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?cc=us&lang=en&swItem=cp_106757_1&AC.admitted=1393904346105.876444892.199480143

• Envy 15-u000na: no network driver, no working USB flash, no CD/DVD drive after downgrading of 10 for Win7 Pro 64

  Please can you help me - I turned my cell phone Envy in to an expensive paper weight, after (below) the upgrade of Windows 8.1 at 10 - I hated it and decided that I must return to 7Pro as I want to join the domain and want to install VMware etc.

  I made the plunge and left me without back that all the important factors are missing, including USB, NETWORK interface integrated hubs & wireless - the machine has no DVD player and it won't recognize not flash or SD - ports USB card readers but work for dongle wireless keyboard and mouse.

  Not too sure where to go now - any ideas?

  Model 15-u000na

  P/N J1W92EA #ABU

  Hello:

  There are other drivers you need...

  Wireless:

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe

  You will need this bluetooth driver for this model of the wlan card.

  FTP://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69230.exe

  PCI device: 1 driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Series 8 Intel xHCI HC - 31 9: download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71258.exe

  ACPI\HPQ6007:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

  ACPI\INT33A0:

  This package provides the driver for Intel Smart Connect technology for the laptop models running a supported operating system. The driver for Intel Smart Connect technology allows the system to exit the sleep mode and web update supported applications such as electronic mail. The system enters sleep once the update is complete.

  File name: sp68943.exe

  ACPI\ACPI000E: The device missing the driver's ACPI wake up alarm.

  After several attempts to scouring the internet, I found the file that I attached below.

  This is the ID of the material shown in the file of configuration information...

  [Manufacturer]
  STD % = AcpiTime, NTamd64

  [AcpiTime.NTamd64]
  % * ACPI000E. DeviceDesc % = AcpiTime_Inst, * ACPI000E

  Download and uncompress the file in its folder.  Do nothing with the 2 files in the folder.

  They must be installed manually as follows...

  Go to Device Manager and click on the (unknown) device of ACPI\ACPI000E who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart.

• HP Envy m6 1183 for example: stuttering mouse after upgrade to Windows 10

  After the upgrade of Windows 8.1 for Windows 10 my mouse is "stuttering". With stuttering I don't mean lag but changes of symbol like 3 times every second from the normal pointer to a pointer with the blue loading ring and back. If I want for example to rename a file, once I typed in some letters it also marks all the text, so I have to restart. Another example is when I want to move a window, it automatically turns its back to the original position, so I have to take baby steps to move.

  I use a HP Envy m6 1183, for example, the product number is C2C05EA #ABD

  If you have HP SimplePass installed, try the following:

  1. launch HP SimplePass

  2. click on settings (the train to the upper right)

  3. remove the check mark next to "LaunchSite.

  4. click OK, then close HP SimplePass

  If this does not resolve the problem, then there probably another background process causing flicker.  You can open (Ctrl + Alt + Delete on the Windows desktop) Task Manager and under the "treatments" tab to see if something is constantly causing CPU activity (look at the percentages in the CPU column).  If so, you can emphasize this topic and click "End task" to see if the cursor will stop blinking.  If Yes, you can then Google the name of the process to try to know what piece of software it is bound to, and then see if there are any available updates or uninstall the software, if it's something you have no use for.

• HP Envy 110: HP Envy 110 "full feature software and drivers" - must use the USB cable?

  On another thread, it was recommended that use "full feature software and drivers" to solve a problem I had with a scan on my HP Envy 110.  This network printer using a WiFi connection.

  In order to take advanatage of the features in this S/W, I must be hard wired USB connected to my PC, not only for the installation, but also for operations?

  Hello

  The HP client software full functionality provide the functionality of most software, any type of software supports any type of connection.

  You can choose a wireless network or a USB connection during installation of the software...

  Kind regards

  Shlomi

• Envy 17 t-k200 CTO: need to enable bluetooth in my Envy 17 t-k200 CTO

  My Envy 17 t-k200 CTO does not recognize any of my bluetooth devices, and I can't find a place in Win 7 where them activate bluetooth

  D5GR,

  Thank you very much, Support HP asked me for my order info and has let me know that my order laptop did not have a bluetooth option, so I ordered a selection of bluetooth USB. My push was because I read like maintenance and service guide and it implies that all Envy 17 come with bluetooth.

  Thanks again for your support.

• ENVY of HP dv6-7204AX: need help to get the BIOS image file (ROM or BIN) for HP ENVY dv6-7204AX

  Hello everyone, I really need someone who could help me get an image file (ROM or BIN) bios for my laptop HP dv6-7204AX ENVY.

  For some reason, after that cleaning my fan cpu and everything put back toghether I had accidentally damaged the bios, because the electric sock, that's what the tech guy said :-(

  My computer is now automatically power on whenever I plug the adapter and nothing start (only caps lock led flashing continuously1time and black screen)

  Thank you

  Hello kieuminhuy... I'm sorry that you are having this problem with your ENVY dv6!

  kieuminhuy, you can go to the page of downlopad 7200 WANT dv6 to download and run the SoftPAQ BIOS proper.  You do not have to run this SoftPAQ on the failed system - it should work on any system!  When you run the SoftPAQ, chose the option to copy the image file of the BIOS to another location (see below).

  I hope this helps!

  WARNING: I am an employee of HP, but I am not a spokesman for HP.

  • If you found this information useful, please take a moment to click on "accept as a Solution.
  • If you do not want to say thank you, please click the 'thumbs up' to give me congratulations!

  

• Want to 4500 printer all-in-one: new software and drivers for HP Envy 4500

  Hello, I bought this printer on 1 October and installed on my laptop Windows 10. My question is I noticed there was a series of printer e-all-in-one HP ENVY 4500 full feature software and drivers, version 32.3, filename: EN4500_198.exe which was released on November 12, 2015. Should I download and install this because I've had since October 2015 printer? If so do I have to do something after the installation to keep my printer working correctly on my WIFI wireless? Thanks in advance for any help that I couldn't find out how call HP to ask this question.

  Thank you very much for your answer! I finally understood how do I know what version of the software and the drivers, I have this morning and I don't have the version more recent and even I was wondering about. Thanks again and have a great Thanksgiving action!

• Envy of HP dv7 - 7373ca: lack of device drivers Window 7 64

  

  I have leveled down Windows 8 for Windows 7 Professional with success and that you have downloaded all current Windows updates available at this time. I downloaded all the drivers from the HP support for this computer site (HP Envy dv7 - 7373 ca) successfully with the exception of the Nvidia Geforce GT driver HP which gives me an error indicating "file intel requires.

  When I open the device (see above) Manager, I have five "other devices" that have no drivers and one of the two adapters without driver. I searched HP forums, web, updates of drivers intel and Microsoft Updates for the drivers, nothing works. Please provide a link to the drivers required to use all the above listed features above to be dysfunctional.

  Finally, the touchpad when typing is extremely annoying! Breast of Windows 7, is it possible to disable it?

  Hello:

  You can use all the W7 x 64 drivers and software by the dv7t-7000 on your model, except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-7000-entertainment-notebook-PC-series/5226224/model/5273846

  To install the graphics drivers first install the driver Intel chipset installation utility first and then restart.  Which will also install the smbus controller.

  Then, install the Intel HD graphics driver and restart.

  Then, install the graphics driver nvidia and restart.

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Comms Simple PCI:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  USB3:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  Unknown is probably...

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  I recommend that consult the user guide for your model touchpad issue.

• Driver for HP Envy 15-j150sr for unknown device ACPI\HPQ6007 on Windows 8.1 (x 64)

  Hello

  I'm looking for a driver for the unknown device ACPI\HPQ6007 on HP ENVY 15 - j150sr for Windows 8.1 64-bit if I need. I upgraded my laptop - replacement SSD HARD drive. I have found information, ACPI\HPQ6007 is associated with HP 3D DriveGuard, which protects the hard drive by parking the heads. But I SSDS, no HARD drive - what's that on your head?)) I tried to install HP 3D DriveGuard for my laptop model and operating system. It did not help, the unknown device remained ACPI\HPQ6007. I don't know what to do about this.

  Hello

  Please try:

  HP 3D DriveGuard Software
     http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61291.exe

  Kind regards.

• Desktop HP ENVY h8-1414 (part #H3Z00AA) need part number card pci-express gen 2.0 quad nic

  nic cards need additional to run simulation software, looking for a card nic quad for this motherboard. has 3 slots express gen 2.0 x pci free.

  need help and suggestions

  Thank you

  -sajid

  Desktop HP ENVY h8-1414 (part #H3Z00AA)

  Hello

  eBay is a good source:

  http://www.eBay.com.au/BHP/Quad-NIC

  or something is similar to that of the following map:

  http://www.computeralliance.com.au/PCIe-Gigabit-Intel-e1g44et2-Quad-Port-network-card

  Kind regards.

• HP Envy 17 t-K200 CTO laptop: HP Envy 17 t-K200 Windows 7 64 bit drivers

  Where can I find 64-bit drivers of Windows 7 to a HP Envy, Model # K4G90AV?   Thank you!

  Hello

  You are welcome

  Software downloads and drivers are on the link below.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-K200-notebook-PC-series/7527536/model/7757409#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  DP - K