The W530 microphone low volume

Similar Questions

• The speaker of low volume, even if the levels are overexploited

  I just got my computer from a melody of Staples yesterday. Today, I noticed that my volume is really low. I tried maxing everything out. I checked the levels under the control panel. Nothing works. Beats Audio levels checked and they are all up.

  I unplugged my speakers to my PC and plugged on my daughter's laptop and the volume is fine, in my PC and the volume reduced to less than half.

  I'm in Windows 8. Have a HP Pavilion. 64-bit system p7 - 1436 s

  Can someone help me with this problem?

  Hello Highland_Lassie,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your audio files being low on your computer running Windows 8. I'm you provide a HP support document: use Microsoft System Restore (Windows 8), which you can use to restore your computer to a point in time where your audio worked correctly. It will be re-setup your settings as before when it worked.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a wonderful day!

• Too low volume of the microphone

  I just bought a new Toshiba Satellite L500D, with Windows 7, and I'm having a problem with the microphone volume, in this sound recording is barely audible.

  I followed all the steps suggested on this topic on the forum: http://social.answers.microsoft.com/Forums/en/w7music/thread/06582922-0014-4dac-9f74-b63f143fbb8e... .but nothing fixed it.

  It's a built-in microphone and audio driver is Realtek.  I did a driver update check and it integrates the latest version.  I all set to maximum microphone volume settings and tried to test records Skype and sound recorder for Windows.  They record, but it is extremely low volume, even if I'm leaning closer to the microphone and speak loudly.  Different recipients of Skype call could barely hear me.  The only thing that saves the high voice is when I run a finger over matte plastic of the monitor frame - which saves super hard for some reason any.

  I welcome suggestions as soon as possible.  I need my microphone to get the work done!

  I hope that the people at Microsoft can remedy the situation as soon as possible, because it is crucial to set!

  I had this problem for a few weeks, I recently read a forum post saying uncheck the: allow applications to take exclusive control of the device:

  Well, I found this setting and changed a few others and I think that he has fixed

  I went through the control panel > hardware and sound > manage Audio devices to reach the acoustic Panel.

  I selected reading > Speakers > improvements and made sure that everything was unchecked.
  "" I selected reading > Speakers > advanced and unchecked "allow applications to take exclusive control of this device.

  I went to recording > Microphone > listening and insured 'listen to this device' is unchecked.
  I went to levels and assured the Microphone level was 100% and the boost to + 10 dB
  I'm gone into improvements and assured that everything was unchecked.
  "" I then in Advanced and unchecked "allow applications to take exclusive control of this device.

  And finally I went in the Communications of the acoustic Panel tab, changed "when windows detects communications activity" to "do nothing".

• The internal microphone too low volume

  I have a new dell inspiron 5050 w intel core 3 and windows 7 and internal microphone level is not high enough.  The level is set to 100 and up to 20 dB boost. Skype calls cannot be heard and sound tests have a very low volume.  I heard that maybe that's a problem with windows 7. Some of those who have upgraded to vista say they have the problem.  Driver update is grayed out. Thought of the back of computer.  Another solution?

  Hello

  1. what the audio output of the computer?

  2 have you made any changes to the computer before the show?

   

  Method 1: Run the following fix - it:

   

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  Method 2: Uninstall and reinstall the sound drivers.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand sound, video and game controllers, right click on the audio adapter option, click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• Very low Volume in Vista microphone

  Hi people,

  In fact, I have 2 questions using my microphone in Yahoo Messenger in Vista that I didn't have when I used XP.

  (1) I used to use yahoo messenger to talk to the family on my XP operating system. But now, in my new PC with Vista, the microphone volume is so low that my family complains that they can hardly hear me. I literally have to scream so that they can hear something. The mic is the same and I have tried the mic in my brothers PC which has XP and it works really well.

  (2) in addition, in XP I could talk to a PC in yahoo messenger as in the two-way communication system, is that I was able to interept while someone says something to me about voice chat. but now its impossible, I have to wait until the other party has ceased to speak so that I can talk to. Know-how as a half-duplex communication.

  Please help me to solve these issues.

  Kind regards
  Zorro.

  I am so excited! My microphone in my headphone works! And I can use in MS and Skype! After playing with all the combinations of audio settings for 2 days solid includes one night at midnight, I finally found the solution. I signed in my PC (gateway) manufacturers and provided the serial number of my PC and searched all the device drivers for my computer. Low and behold there was one available for the Realtek microphone and a speaker that came with my PC. I downloaded and installed and everything works now! Wonderful! For users of the gateway with Windows 7 or Vista, the file was Audio_Realtek_ALC888S - VC2_6.0.1.5901_W7x64. I downloaded and saved on the PC. Then I went to control Panal-> All Control Panel Items-> Manager-> sound, video devices and game controller (Double click)-> Realtek High Definition Audio-> Action-> update driver software. From there you will be directed through the following steps to search for updates on your computer and they will be installed for you. A message came that this updating process can change my current settings and I said almost thank God for it! In any case, I'm as happy as possible. If you are not a user of gateway, the only difference for you would be to look on the Web site of the manufacturer of your computer instead of the site of the bridge. Good luck to all of you sick poor frustrated.

• low volume in the 6s iphone call

  I bought the new iphone 64 GB 6s in the last week and noted that the volume of the earpiece is quite low.i can't hear calls properly.volume is ok with hands-free bluetooth and speaker kit and only has problem with earphone. I checked all the settings but nothing is useful, then please help as I am very bored with the poor performance of the phone.i follows adjustments, but nothing has worked for me

  1. activate the hearig

  2. verified volume options

  3 restart my phone

  4. the latest software is already installed

  If anyone has a solution please share otherwise I think back to the android phone that I expected this question in the iphone.

  Hello aghaffar16,

  Thank you for using communities Support from Apple!

  It is my understanding that you experience low volume from your iPhone using a headset.  It is certainly not expected behavior.

  Looks like you have already made a good troubleshooting.  The next thing I would do is try another headset and see if the results are the same.  As obvious as it may seem, remember that the headphone is plugged all the way to the iPhone.  Don't forget to turn up the volume while you are actually on a call.  When not online, the volume allows you to control the music, alerts and other sounds on the iPhone, but not the volume of calls.

  More information on what to do if trouble hearing a call can be found here:

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  See you soon!

• The HT820 ear and lower volume stuck button

  I had these headphones for almost 2 years works very well. I don't have a bluetooth phone, but I use my HT820 with my HP Ipaq 211 listening to music or watching movies. I also connected them to my work and the home pc. At work I connected them to the phone Nortel 1150. I just had a few problems since I got to the two atria are beginning to tear. I had them in my backpack and I don't know how, but one ear cushion came off the coast. So I'm wondering where I could get replacement tips? The other problem I have is with the low volume on the left hand button. The button is stuck, but I can live with that, because it is just the right volume level. If I don't find any guesswork replacement I can buy another pair and I can leave the old one at work since I can use it with the 1150 of Nortel. Thank you

  Join this other thread:

  As for the volume key. This aspect will likely be repaired if the warranty is only for one year. Sorry!

  Mark

  Support Forums Manager

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• low volume on speakers + headphones, with all the / internet Media Center, etc. Volume 100, get the exit of the level 20 about

  I had recently an update for Nvidia (price reduced it more nothing to do with visuals) uninstalled most recent program installed (silverlight) - made no difference. Uinstalled SRSsandbox, he had previously given me trouble with volume, so I had this option unchecked. Ran the microsoft Fixit program, but no fault found with my system.

  No error message, just c. low volume!

  Thank you for your offer to help old companion. The installation/re-installing the audio driver does not work (apparently wasn't the problem) I finally solves the problem by uninstalling the "device high definition audio" and then re-install. Problem solved! -Thanks again for your interest - steve

• The Bluetooth media suddenly got very low volume

  I was happily listening to Pandora via bluetooth for months, when all of a sudden about two weeks ago, the volume got so low I can barely hear it.  I checked the media volume control and it is bent full.  Bluetooth phone call volume still works fine and is generally of fort to operate in full.  I tried deleting and reinstalling Pandora, but no help.  I also tried another internet radio app (Slacker), but he also plays very low volume.  The only changes that I know are updates frequent free app I install I'm warned.

  Does anyone else have a problem like this?  Should I try a hard reset?

  Thank you

  Galán (Droid, 2.1 - update1)

  I did and I had to wipe my phone bluetooth devices and reboot then re add devices.  This took care of it.

• Low volume from the speakers.

  I have pre-installed Dell with windows 7 Premium. The sound level of the speakers is LOW even when the value to 100%. What can I do to increase the volume. This problem started very recently. Need your suggestions and help.

  Thank you...

  Hi Bhagwati,

  Make sure that your speakers are properly connected to your computer.

  Step 1

  Right-click on the "speaker" icon and select playback devices, and then click speakers and he grew up their properties. Click the levels tab and use the slider to increase the volume, and then click OK to save the new setting.

  

  Step 2

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Step 3

  I suggest you to update sound card drivers later and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 4

  Turn on the left and right balance

  (a) in the search box type sound start and click on enter.

  (b) select the speaker and then click on Configure button.

  (c) in the option of Audio channels, select your speaker and then click Next.

  (d) give a check the box that says before left and right and then click Next and then click Finish.

  Step 5

  Also, make sure that the audio is on in DVD quality:

  Right-click on the "speaker" icon and select playback devices, and then click speakers and he grew up their properties. Go to the advance tab and then set the DVD quality.

  

  See also:

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP G71-340US low volume when audio sound on the highest rate

  Very low volume with sound levels at the highest point, intermittent reception during audio streaming, loud buzz unknown sometimes for unknown causes. I own a hp G71-340US since 4/10... and am these audio problems.  Y at - it an update to fix this problem?

  Hi Sharopa

  Try reinstalling the audio driver...

  Follow these steps:

  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically.

  If the problem persists, please upldate the audio driver following the steps mentioned below.

  Install an updated audio driver

• How can I stop Winodws 8 music to move to a low volume, when the focus is lost?

  When I play music through Windows 8 music metro App, it falls to 20% volume when I do anything else on my system. For example, I'll start playing some Nightwish, go see my mail and the music will be 20% in volume.

  The only way that to work properly, it seems to me is if I have the music app line up on one of my monitors (I have three) and use only desktop applications. If I touch any application metro except for the music, the music will be reduced to a low volume.

  I've been running Windows 8 on my laptop (screen only) for a while now and do not experience this problem. Would it be because of multiple monitors?

  I'm really at a loss because the only other fault I have with experience is not having a list of music being downloaded when you download something from Xbox Music - its almost perfect.

  It was the first thing I tried, and it has not changed the behavior of the application.

  However, I have noticed there are updates available for the included applications and after you apply the update on the implementation of the music (I had to reboot for updates to be applied, although it's telling me to do), the music app is more exposed its tendency to decrease its volume while running in the background.

• 15 - ac098tu: low Volume by Mic

  Hello

  I have a huge request concerning the low mic volume by realtek dts sound studio, I can see the mic properties shows low bars when I speak into the microphone through front or through portable computer microphone, but when I uninstall the driver from realtek dts sound studio, it works perfectly with the microphone and have good enough bars to the microphone volume.

  But a little low volume on the speakers for sound.

  When I connect wifi windows 10 it automatically update the sound driver realtek dts, I need help about mic low volume, so teach me how to stop updating the audio driver or get me the solution for a low microphone volume please.

  Thanks and greetings

  Hous

  Hello @LeoManinder,

  Thanks for the quick response!

  I understand that you already exhausted the steps mentioned in the solution I provided in my previous post.  Try the following steps to stop your system to automatically update the Audio driver:

  1. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  2. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  3. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide for the Audio from Realtek driver updates.  (This will block your system to automatically reinstall or showing updates the driver).
  4. Change back the setting of Windows Update Services to manual automatic (delayed start).
  5. Restart your computer.

  Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!