Envy 15 t-j100 Win7 need two remaining drivers downgrade

Similar Questions

• Envy 15 k200nw: decommissioning of k200nw HP Envy 15 Win10 for Win7 - need direction and drivers!

  Hi all good people!

  I recently purchased this new HP Envy 15 - k200nw (product no. L0M95EA #AKD) and did my best to get used to Win10 but failed miserably. I just missed a few good ol' ' interface of Windows too so I had demoted him to Win7. And to add insult to injury - has not made a copy of the front swsetup folder. Now the problem is that some things work and some don't. I spent almost all day by browsing this forum and looking for answers, but my level of computer knowledge is not enough to understand all the knowledge and advice and understand it on my own.

  I know that I should have some drivers and I have already installed the chipset driver, offered HP Web site.

  From what I've observed so far, is that:

  -Beats Audio software is no longer in Control Panel and I could not find a driver for my laptop to fix (even if the speakers work)

  -Bluetooth seems to be dead, it will not receive files or install drivers for the recently paired devices

  -the cooling system is strong as hell and will not calm down

  -touchpad gestures (like scrolling movement) would ' t work anymore but I downloaded a driver on the Symantec site and it works now, just a little different

  -fingerprint sensor is the death of all

  -There is no pop - ups over who to display changes in the level of the volume, brightness, etc. on the screen

  Can someone please be so kind and show me the way how to fix these problems or point to a similar thread that I him haven't noticed? I was downloading like crazy drivers, but now there are too many of them and some are not suitable for my hardware but I downloaded them in any case. The collector syndrome

  Hello:

  I suggest you to reinstall W7 and use the W7 x 64 drivers and the software of the 15 t-k000, except the BIOS and firmware files.

  All the drivers you need are here and for your model.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K000-notebook-PC/6936206/model/7174348

• HP Envy 17 of Touchsmart m7-j078ca Windows 7 drivers (downgrade)

  Hello!

  This forum rocks! It has already helped me get Win7 working on my laptop. However there are still a few features I could not find the drivers for. I did a search through these forums, but still could not find anything. These are the devices:

  PCI device
  ----------
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00
  
  USB Universal Serial Bus controller
  --------------------------------------
  
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1966103C & REV_05
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1966103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03
  
  Unknown device
  ------------------
  ACPI\HPQ6007
  * HPQ6007

  I apolgize if I started a new thread on an old theme, but there was some chipset drivers & usb drivers I have tried, but they don't seem to work. Any help would be greatly appreciated!

  Thank you!

  James

  Hi, Ben Moussa:

  Here are links to drivers for the devices:

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

  USB USB Bus controllers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

  Unknown device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

• HP Envy 17 t-j100 Quad Edition: product number mismatch

  Hello!

  I'm about to upgrade to Windows 10 and have questions about my laptop.  By my initial order, the number of the product I ordered was E4S82AV, but the HP Support Assistant and the battery compartment that it is E1P14AV. When I touch E4S82AV in the issue of the product on the site Web of HP, no software or drivers are found. I have a matte screen, no touchscreen model.

  Can someone tell me the difference between these two products numbers and why the one I ordered does not appear to exist on the support Web site? It's not touchscreen touch vs?

  I fear that if I need software or driver updates, those under E1P14AV are really suitable for my system.

  For example, I had a problem with an update by HP Support Assistant on my CyberLink PowerDVD software failure (it finally updated OK).  He had several Softpaq SP70823 and this file already exists in my folder in C:\SWSetup.  I checked the support Web site, thinking I would try to download the software from there, but I don't see that listed as an option under E1P14AV sp70823.

  Thank you!

  Your Envy 17 t-j100 Quad Edition is a CTO (configure to order) machine that starts with a number of basic product which replaces a specific number of product once that order you with the card you want. Not sure about the DOWNLOAD - but not the first time neither model which has software missing from the support page.

• ENVY 17 t-J100 Leap Motion: keyboard backlit ENVY 17 t-J100 Leap Motion edition shuts down after each power down.

  My brother has an ENVY 17 t-J000 Quad Edition. Only about 6 months. Its backlit keyboard remembers its state of on or off when it reboots or off. When he turns on his laptop back, the keyboard is always if it's him on when he turned off the laptop.

  I just got the ENVY 17 t-J100 Leap Motion backilt keyboard edition. But every time that I reboot or shutdown with the backlight on, it is turned off when I have the laptop or reset. So whenever I have to re - turn on the backlight. Very annoying.

  Anyone else with the jump movement 17 t-J100 having this problem? If so, I hope it's fixed soon. I also can't update the Nvidia drivers then perhaps we need a BIOS update to solve these two problems.

  I just checked to be sure. It turns off if the laptop is turned off and turned on then again - but if I just restart the kbd is running.

• HP envy 15 t-j100: screws for hp envy 15 t-j100 brouilla

  For some strange reason, that the screws fell out of the back of our hp envy 15 t-j100.  The screen is no disconnected cpu/keyboard and we must continue to push the two together.  Fear that it will break

  It's the rear screw to the left of the screen.  I don't know how to get a replacement screw.  Any help would be great!

  Hi there @prrt949,

  Thank you for visiting the Forums HP's Support and welcome! I read your post on the Forums of HP Support and see that you are having problems with your HP ENVY 15 laptop t-j100 Touchsmart computer, missing some of the screws. You mentioned you're scared at this point, it will break.

  Here's TouchSmart HP ENVY 15t - j100 Maintenance and Service Guide. If you look at Chapter 3, page 30, you will see that there is a screw Kit, you can order and the part number for it. Here is a document for you to order HP certified spare parts.

  If this does not please use the following link to create yourself a file number, and then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  They will be happy to help you immediately.

  Have a great day!

• Quad edition of Envy 17 t-j100: replacement hard drive

  need to replace the disk hard drive serial # [personal information deleted] in my touchsmart Envy 17 t-j100.   Cannot afford to sata now.  Any suggestion where I can buy a compatible to the original.  This is a 1 to 5400 RPM.

  terfig wrote:
  

  ..... Cannot afford to sata now. ...

  Hello

  You MUST use SATA, no choice. You're probably talking about SSD. There are several standard HDD around. I bought one week last disk HARD next to test things-much cheaper elsewhere

  http://cplonline.com.au/hard-drives/laptop-hard-drives/2-5-Seagate-1TB-with-8g-MLC-Seagate-Momentus-XT-laptop-HDD-st1000lm014.html

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Seagate-st1000lx001-1TB-laptop-sshd-w-32GB-NAND-2-5inch-SATA.html

  You can buy WD, Toshiba, Hitachi...

  Kind regards.

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!

• HP ENVY 15 t-j100 Quad Edition: replace the motherboard for HP ENVY 15 t-j100 Quad Edition CTO Notebook PC

  HI guys,.

  I have "HP ENVY 15 t-j100 Quad Edition CTO Notebook PC"

  Serial number: (deleted content)

  Product number: E1P04AAR

  Bought a laptp renovated off eBay from someone with thousands of positive feedbacks. It worked great for 6-7 months and then one morning it has not started up. I tried everything, called Hong Kong HP support and even bring to the service center, but was not able to get it fixed because this model was never launched in Hong Kong...

  I tried calling HP we support and they would fix it for $ 300 + and that too, I send this laptop in the USA to someone I know and then HP will come from there. Is not possible.

  So now what I'm trying to do is to look for the replacement of the motherboard, this is what im says does not work. I searched and found these links - I need to know if it is OK for my model?

  http://www.eBay.com/Sch/i.html?_odkw=HP+envy+motherboard&LH_PrefLoc=1&_udlo=49&_mPrRngCbx=1&LH_FS=1&...

  It will be a great help if you guys allow me to know which of them is compatible with the model above.

  Thank you!!

  Hello

  It's a CTO machine therefore normally only available in the United States and perhaps the Canada. Please use a portion for PC cards from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=E1P04AAR

  Again, it is a machine CTO, you should check its parts before you buy any replacement.

  Kind regards.

• HP Envy 15 t-j100: keyboard NOT working on HP Envy 15 t-j100 computer laptop

  Hi all!

  I have a HP ENVY 15 t-j100 Quad Edition CTO Notebook PC (ENERGY STAR), and most recently updated Windows 10 Saturday (a set of recommended updates), and after parts of the update on my keyboard no longer works. The bottom three rows of keys work fine, but the top row is 1) keys do not work, or 2) keys randomly type other keys (ex. The 'P' key types';  5, 6, t and touch still works well, the rest do nothing). I have Windows 10 build 1511 and connecting an external keyboard (wired and wireless) and keyboards work fine. I ran a system restore to remove all applications, while preserving my files yesterday with success, no improvement. I also cleaned the keyboard with air compressed and removed the oil on the surface with alcohol isopropyl (to friction) (of use). In addition, my updates are currently blocked at 39%. I have uninstalled/reinstalled the drivers for the keyboard through the devices, and update manager different drivers through the HP Web site. I also have many resets have little hard done to solve this problem.

  Any help to fix this would be appreciated! I don't know what to do!

  15 t - j100 REPAIR:

  Manual

  See p. 92. Keyboard replacement is only a little trickier on this model, I'm sorry to say. If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 15 t-j100 Quad Edition: upgrade of the current HARD drive

  I have HP ENVY 15 t-j100 Quad Edition laptop which currently has a 1 to 5400 RPM HARD drive. I'm looking to upgrade to SSD drive and need help with the following responses

  (1) the laptop does support more than 512 GB since the laptop computer maintenance document lists (and does not) support max 512 GB

  (2) any 2.5 SATA 3 SSD should work with the configuration given my laptop as long as its not more than 9.5 mm thick. Please confirm.

  I was chatting and asking for a response for the last month 1 HP support and I have not received a positive response. Forums suggest that capacity any no where like the cat and people on HP customer service gave the following answer.

  The manual list only up to 512 GB because that's all there was when the laptop was sold or just would not be a market for the 1 TB SSD. Not too long ago, they were $7-800 and beyond almost anyone means. But there is no reason that your laptop can not run a 1 TB SSD. Also, you are right. All SATA 2.5 inch wide SSD will work as long as it's not more than 9.5 mm thick. These days, almost all of them are 7 mm. I would recommend a Samsung 850 Evo but there are a lot of good ones out there. We had a set of trouble on the series MX Crucial reports, however.

• HP ENVY 15 t-j100 Select Edition CTO Notebook PC Network Drivers

  Hi, I hope someone can help with this problem.

  I just bought my new laptop and did a downgrade to Windows 7 Ultimate 64-bit.  I have almost everything now except for Bluetooth.  My portable computer product number is E9W31AV

  It comes with bluetooth and card Azurewave AW-CE123H mini combo wireless.  It's a chip Broadcom = BCM94352HMB.  I tried to find a driver for this card but have not been able to find one.  I was able to get the wireless operates with a driver I found for BCM4352HMB what similar chip without Bluetooth.  I tried to install BT Broadcom driver it self after and before I install wireless driver and he just telling me that my bluetooth is not on.  I looked in the HP connection manager, and Bluetooth is on and it says disabled in Device Manager.  Anyone know what else I can try? or a link to the driver?

  Thanks in advance.

  For anyone having the same issue.  I think I just solved it myself.  I found two different drivers that worked for me.

  HP Envy 15 t-J100 Select Edition CTO, product #E9W31AV

  Azurewave AW-CE123H

  BCM94352HMB

  802.11 a/b/g/n/ac 2 X 2 Wi - Fi + Bluetooth

  I installed this driver first to get Bluetooth working.  For some reason any WLAN driver included in this driver pack did not work for my WLAN.

  http://saiseiya.com/?PID=67569128 (I know its in another language but scroll down and find Windows 7 Driver)

  Then, I downloaded this driver to get my WLAN work.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_126926_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&ac.admitted=1396929539006.876444892.199480143

  So far so good.  Everything works so far.  I would like to know if this help anyone.

• Enable hardware virtualization on select edition of HP Envy 15 t-j100

  I need to turn on hardware virtualization on a HP Envy 15 t-j100 select portable edition.

  It is to run Oracle's VirtualBox.

  Thank you.

  RT2014

  Restart the system Push F10 for Bios

  Go to system-> device configurations

  Here, you should have 'virtualization technology'. Select it and press ENTER. Choose Enable, then press F10 to save the changes and exit...

• Will be taken in charge of HP ENVY 17 t-J100 16 GB Ram

  Hello

  I have 8 GB of ROM at the moment. I have a HP ENVY 17 t-J100 QE jump movement can go to 16GB? and what kind of Ram do need me? Thank you. K

  Hello

  Yes, it will support the 16 GB (2 x 8 GB modules).  An example of what you need are visible on the following link.

  http://www.crucial.com/USA/en/envy-17t-J100-leap-motion-QE/CT5172225

  Kind regards

  DP - K

• Envy 17 t-j100: HP Envy 17 t-j100 Distance between Slots USB suggestion

  I designed this post as a recommendation for HP.

  I have a HP Touchsmart Envy 17 t-j100 and everything is great so far.

  The only thing that is really annoying is the distance between the USB ports. PLEASE increase the distance between the USB ports for future models. I have a lot of problems tryng to connect everything I need.

  

  Even if I try to open the DVD player, it will get stuck in my USB device. I mean how hard is to put a distance of 1 cm between them?

  

  If the USB cables are standard size, there is no problem, but most of USB devices are now much wider than a standard USB cable and I continue to have problems.

  

  I mean it's a laptop 17 ", there is plenty of space on the sides. In the end, it is best to drop the DVD player and put a VGA connector instead, but with the largest distance between the USB ports.

  

  I plan to buy another DESIRE in the future, but I really want my new laptop have USB ports with a wider bewtween to distance them.

  Thank you very much and I hope that HP will take care of this little problem on future models.

  Good day.

  Hi @catapara89 ,

  Thank you for visiting the Forums HP's Support and welcome. Thanks a lot for taking the time to make us share of your suggestions on the USB slots. It is important and has been seen.

  Have a great week.

  Thank you.