Envy of HP dv7 7255dx: universal Bus controller and SM Bus controller

Similar Questions

• Envy of HP dv7-7255dx C6N73UA: search for information on the motherboard brand and model for HP laptop

  I am looking for the exact make and model of motherboard of my laptop.  Is there someone who has some info on it?  My laptop is the HP dv7-7255dx C6N73UA Envy.

  Thanks in advance.

  I'm sorry. I missed that.

  The easiest way to do this is by using the HP Partsurfer. Entry of your laptop and parts available information will be displayed.

  http://PartSurfer.HP.com/search.aspx?IsmobileDevice=Y

• Envy of HP dv7-7255dx live replacement

  I have a HP Envy laptop dv-7225dx money. Recently, one of the screws got loose somehow and I didn't notice it until it broke. Now, I have lost the screw and part of my laptop is literally coming out when I open my laptop. as a result, I have to use a bit of force to back up.

  I have a few screws but none that are small enough.

  Anyone know where I can get a couple live replacement (in case this happens again) and how it would be?

  I know, the screw is close/end, small and black. Also if anyone knows the extent of the screw would be great!

  matmllr4 wrote:
  

  I have a HP Envy laptop dv-7225dx money. Recently, one of the screws got loose somehow and I didn't notice it until it broke. Now, I have lost the screw and part of my laptop is literally coming out when I open my laptop. as a result, I have to use a bit of force to back up.

  I have a few screws but none that are small enough.

  Anyone know where I can get a couple live replacement (in case this happens again) and how it would be?

  I know, the screw is close/end, small and black. Also if anyone knows the extent of the screw would be great!

  Hello

  I suggest buying the screws from the laptop on ebay. There are a lot of them for cheap.

  This manual tells you what size you need: http://h10032.www1.hp.com/ctg/Manual/c03591253.pdf

• Pavilion dv6-6b6sa: universal bus controller driver (usb)

  Please can you help me with the driver for universal bus (usb) for my laptop controller

  Hello:

  You need this driver...

  This package provides the driver for host controller NEC Electronics USB 3.0 for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp54479.exe

• ENVY of HP dv7-7259nr

  I currently have the wireless Centrino 2230 adater.  I would use the double band Centrino 6235.  Is my cell phone compatible?

  As the bus interface for these two devices is even, to my knowledge, it should be compatible. Here is a link that has the process to remove and replace the wireless adapter:

  ENVY of HP dv7 Notebook PC Maintenance and Service of Guide

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.

• ENVY of HP dv7-7230us: HP DV7 disc includes six partitions - are they all necessary?

  I am trying to create a system image to save laptop my mother using Macrium after receiving a SMART disk error. It is to show that the hard drive has 6 partitions:

  1, WinRE (none)

  Primary NTFS

  235.3 MB

  400,0 MB

  2. NO NAME (none)

  Primary FAT32 (LBA)

  104.6 MB

  260,0 MB

  3. (none)

  Unformatted primary

  128.0 MB

  128.0 MB

  4 (C

  Primary NTFS

  541.21 GB

  670.92 GB

  5 (none)

  Primary NTFS

  274,6 MB

  350.0 MB

  6 RECOVERY (D

  Primary NTFS

  22.86 GB

  26.60 GB

  Are these really necessary? I understand that one or possibly many may have to do with Bitlocker, but the #3 partition in particular looks like it's just foreign. It's not like she's taking a lot of space, but it seems unnecessary.

  Thank you

  ENVY of HP dv7-7230us Notebook PC

  Model: C2N66UA

  Hi there @infohack

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I can certainly understand your concern about this mix of partitions, and I am happy to help you with this.

  As a first step, this page: partitioning and naming of readers (Windows 8)

  There is also this post of @Daniel_Potyrala , even if reference is made to windows 7, it is loaded with useful information that applies to windows 8 as well. Its theme is more on the preparation of another drive with partitions, but this part of the update, there is information on the purpose of most of the partitions that you ask the subject.

  How to repartition the disk HARD of HP notebook with pre-installed Windows 7

  Since some of the partitions you listed are not labeled, it is difficult to tell what some of them are, but in a UEFI environment, it is possible one of those is a part of this environment. The recovery partition would have your plant to install the image. I would recommend you do a CD set of recovery as well via the recovery manager. You can make only one series.

  I hope this helps a little.

• ENVY of HP dv7 Notebook PC: HP ENVY dv7 Notebook PC can pass between the Intel and Nvidia graphics processors

  I have a request when it runs I get an error as follows:

  "Display driver stopped responding and has recovered display Intel graphics driver Excelerator for Windows 7 (R) driver stopped responding and has successfully recovered."

  Is it possible to assign this application for Nvidia graphic card instead of 4000 GPU Intel. If yes how to do this assignment.

  Thank you

  Here's what I had to do to get the graphics Performance at a level that would allow the Surfcam CAM application traditional 2015 work correctly:

  Envy of HP dv7 - 7373ca required parameters for 2015 Surfcam traditional

  Right-click on it to office;

  Select the Nvidia Control Panel

  1. Setting the parameters of the Image: use the settings of the 3D Image.
  2. Manage 3D settings: NVIDIA High Performance processor
  3. Physx Config set: GeForce 650 M Graphics

  Select the graphic properties (it comes to GPU Intel HD 4000)

  1. Media: Preferred 3D Performance
  2. Power: Max Performance

• Intel ICH9 family USB Universal Host Controller updates for HP G60?

  I have a HP G60 laptop and recently there has been updates. It seems that when I restart it, it tries to make updates for numbers of Intel ICH9 Family USB Universal Host Controller updated 2937, 2938, 2935, 2936, 2939, 293 a, 293C and 2934. He tries to complete updates, that they fail every time. I am wanting to know how to get the updates in order to install correctly and whether they are necessary for my computer. Thank you

  This widget could not be displayed.

• Envy of HP dv7 7073ca Windows Recovery Environment help!

  • Envy of HP dv7 Notebook PC running on Windows 8
  • Product number: C2H79UA #ABL

  When I'm on the HP Recovery Manager screen I want to do a factory restore, but it says (disabled: recovery Partition is removed) but when I check the partitions on my laptop, there is a partition that says RECOVERY (D and Local disc (C.)) How can I do a factory restore?

  Ok. Sorry to hear that you did not have serial or usb disk recovery recovery media.

  This means that, unfortunately, in your case, than to buy a set of HP or send to drive hard reimage is your less expensive options.

  It would be wise to buy a set of recovery disks or to ask if an instant multimedia usb HP rcovery disc is available for your laptop.  At least this way, you would be not dependent on any other repair of your PC. You could do it yourself after reading a tutorial or watch a video on using the recovery media.

• Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 does not work correctly

  On my Toshiba Netbook USB ports do not work. When I troubleshoot I get error: Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 does not properly detected - Windows has detected a problem with Intel (r) 82801 G don't anyone knows how to solve this problem?

  Hello

  I suggest that you install the latest drivers for the chipset from the manufacturers Web site.
  http://www.Toshiba.com/Tai/

  Alternatively, you can try to install the utility to update .inf for the chipset model of check and Intel website.

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support

• Problems with the installation of the Intel ICH8 Family USB universal host controller

  Well, I recently got a new motherboard from HP for my Compaq Presario V3904TX and the Intel PM965 Original has been replaced by the 30CE Wistron.

  Then I have my hard drive has decided to break, so I had to re - install a new OS that I chose to buy Windows 7. After installation, I installed all the drivers that it should but when I got to the Installation Intel Chipset Software, everything was fine until it loads up to the Intel ICH8 Family USB Universal Host Controller and it sends an error message telling you out to sofetware of the installation. So currently, both of my USB 2.0 sockets do not work because no drivers have been installed.

  I tried different drivers, but none of them worked. So I need some help here guys. Thank you.

  Sure. You can dual boot Windows and Linux.
  The best way is to buy a HDD mobile phone spare (or even used) so you can play with it.

• ENVY of HP dv7-7332ea Downgrade to Windows 7

  Hello

  I want to downgrade my WANT HP dv7-7332ea for windows 7 and I have a few questions, is that possible? Should I have all the drivers I need after?

  Thanks for your time and your help.

  Best regards

  Nuno Pedrosa

  Hi, Nuno:

  W7 is not supported on your laptop by HP.

  If you decide to install W7, HP will provide no support for the operating system problems.

  Before installing W7, you should make your media recovery W8 first the case where something goes wrong, or you just decide the W8 back on the PC.

  All the W7 x 64 drivers and software for this model should work on yours.

  DO NOT USE THE BIOS FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5273735#N506

  In order to install W7, you must go into the BIOS and enable the legacy mode and disable secure boot.

  Secure boot is not compatible with W7.

  Best regards

  Paul

• On a University package prepaid and they ask me to buy illustrator.

  On a University package prepaid and they ask me to buy illustrator

  How just install illustrator again as if I had before it crashed? I wouldn't buy because the University has already paid for it.

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

  - and Troubleshooting FAQ https://forums.adobe.com/thread/1962238

  - and https://helpx.adobe.com/creative-cloud/kb/cloud-website-shows-trial-purchase.html

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• ENVY of HP dv7 Notebook PC: USB-error if HI USB Controller 31 on Windows 8.1 for the HP ENVY laptop PC

  My computer has been contiually gel and very slow on all programs.  It seems that it is a USB - IF HI USB COntroller with error 31.  I have all sorts of problems ever since I downloaded to 8.1 with the gel and the slow sometimes, but it has gottne so badly at that time that the computer is sometimes unnecessary.

  Hi @wyndeway,

  Thank you for your request!

  I understand that your computer has been constantly icy and very slow. When you have verified the device displays error 31 on a USB controller Manager.  It started after the Windows 8.1 classification.  To help you more effectively, I need the Envy DV7 specific model do you have? Computers laptops HP - how can I find my model number, serial number or product?.

  Do you have a rear roll of 10 Windows to Windows or did you reinstall from a retail copy or perform a recovery?  Have you done all your Windows updates, after the downgrade?  You ran the HP Support Assistant?

  Try this for USB:

  • Go to the Device Manager
  • Right click on the USB controller with the error
  • Choose uninstall and remove.
  • Restart your computer.
  • Open the Device Manager and click on Action
  • Click scan for hardware changes.

  Please let me know the results.

  I'm happy that you've become a member of the HP Forum.  It's such a wonderful site to find answers and advice. Here is a link to the first time here? Learn how Post and more for you to have the most rewarding experience and answer questions about the display.