EOS Digital Rebel

Similar Questions

• Canon EOS Digital Rebel XT photos are stored at 72 dpi and not 180 dpi. Can I change this?

  When I download my photos taken with my Canon EOS Digital Rebel XT to my computer, I see they are listed as 72 dpi, but when I download pictures from my small pocket cameras Canon (like my Powershot S410 or ELP 300) they are listed as 180 dpi.  It is a function of the cameras, or is it a setting I can change on the rebels to store the photos at 180 dpi?

  My second question is: it won't hurt the quality of the photo printed so I manually "resize" the dpi to 180 in a photo program before printing.   The vast majority of my photos are just stereotypes that I print 4 "x 6", but sometimes I get a good picture I like to enlarge. "

  As you can see, I know very little about digital photography.  In the past, I have not even noticed that pictures of rebels were at 72 dpi and the others were to 180.

  All the information that will inform me on this subject will be greatly appreciated.  Thank you.    Mac

  If you say that the printer to print a 4 x 6 proof it will not (in general) paid no attention to indications of DPI image.  All shots of my XSi are 72 dpi so I printed several pictures on a dozen different places throughout the city and the DPI setting in the image file is ignored in favor of the resolution of the printer and the size of the image.  In other words, if the printer only 300 DPI then my impression out to 300 DPI.  I've never seen a case where the printer used the DPI setting in the file.  I can't guarantee that it will not happen on some printers, somewhere.

  But most people don't print that many images in that a lot of places so I suspect that if you are printing a single image at any place printing 'new' you can determine if it's going to go wrong or you can take the time to set the DPI setting on the image with your image editing software.  I'm not sure of what you use to edit your images, however, two following software packages allow you to adjust the DPI or print resolution:

  IrfanView allows to change this setting: http://www.irfanview.com/

  GIMP also allows you to modify: http://www.gimp.org/

• Are there any drivers for the canon digital rebel eos 300 d for Windows 7

  Are there any drivers for the canon digital rebel eos 300 d for Windows 7?

  Hello

  Like you need help with the driver for Canon digital rebel EOS 300 d, you will need to contact the manufacturer of the product for the driver. According to the Windows 7 compatibility check, this particular camera is not compatible with 32-bit (x 86) as a 64-bit (x 64) operating system.

  For more information about the Windows 7 compatibility, visit this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&s=canon%20digital%20rebel%20EOS%20300D&type=Hardware&page=1&os=32-bit

  For more information about the driver, visit this link: http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_digital_rebel?selectedName=DriversAndSoftware

  I hope that helps!

• EOS digital solution disk worm 29.3 downlaod online

  Hello

  I would like to know where I can download the EOS digital Solution disk worm. 29.3 online.

  I have a Mac OX El Capitan 10.11.3 version and I don't have a disk drive.

  Thank you

  It will work.  What is important, is that you match the camera, not the lens.  Lenses are interchangeable, don't forget.

• Just bought an old Canon digital Rebel (DS6041) and cannot upload photos on my laptop (Win 10).

  I just bought a Canon Digital Rebel DS6041, opportunity and it all works very well, I don't see the camera when I use the USB connector for my Windows Mobile phone, 10.  It seems no way to download the photos to the computer.  Where can I buy a device I can plug the CF card, and plug the adapter into the SD card on my computer?  Or is there a workaround that would make a direct connection to work like all other digital cameras I've ever used?  I've never had one problem for the computer to recognize any other camers, including Fujifilm, Olympus, Canon or other.  Why this one?

  Card readers solve a lot of problems like software latest leaves aside the necessary drivers for our old devices. Everyone should have a map handy reader because they allow transfers from / to any computer with a USB port.

• Have a Canon EOS 20 d. My EOS Digital Solution Disk won't work. How can I download it?

  Have a Canon EOS 20 d. My EOS Digital solution disk will not work.  How do I download this software somewhere? It is not available on the list of Canon software. Can I use this software for Canon EOS 40 d?  Help.

  Yes, the DPP 3.14.x coming on the 40 d Solutions disk download should work with your 20 d.

  So I would say download the new drive solutions from the 40 d page. It won't ask you your serial number

  number. The series 20 d should work. But if not you can use your 40 d serial number, so you should

  be defined. :-)

  See you soon,.

  Bill

• Drivers for Canon Digital Rebel XT 350 d on Windows 7 (64-bit) PC

  How to find and install drivers for my camera Canon Digital Rebel X 350 d? I have a Windows7 (64-bit) PC. Canon said that widows 7 PC site doesn't have drivers for my camera.

  Hello

  If the site says ' driver may be included in your operating system or you may not need a pilot ' then you why that you need? Your camera has a port "output" (probably a micro-USB port)? If you can, just plug the camera into your computer, turn on the camera, and it should appear in your file (e.g. Windows Explorer) Manager. It cannot be labelled as Rebel X camera, but something more esoteric like DCIN or other such lettering which is actually the name of your memory card or other less clearly understood.

  If your camera is not a port of 'exit', it is perhaps not able to connect it to a computer (which would be very strange indeed). Thanks for posting here back with more information on your camera, the ports as they are and what, if any, errors you have found. I'll try to help you, but it takes a lot more information to do this.

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• I have Photoshop CS5 and a Rebel T3i EOS digital camera.  I would like to work with images camera raw, but I'm told that I need a Camera Raw-plug-in Version 6.4.  Where can I get the plug-in?  Can someone tell me where and how to find and acquire?

  Of course I would appreciate assistance with this.

  Adobe - Photoshop: For Windows

  Adobe - Photoshop: For Macintosh

• Digital Canon Digital Rebel XT 8 Megapixel DSLR camera

  64-bit Windows will not recognize the device when it is connected.  (already made sure to set the mode correctly on the camera)

  Tuesday, October 16, 2012 13:36:20 + 0000, DanSmith53 wrote:

  64-bit Windows will not recognize the device when it is connected.
  (already made sure to set the mode correctly on the camera)

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Get files from the Image of the T3i via USB

  I am currently using an old EOS Digital Rebel with a 18-55mm lens, which I use for photography of product (to the site).  The company is more and more so I take lots of photos, and it's getting heavy to keep the withdrawal of the CF card and load into the PC.  I want to move to a configuration that does not need a card to move between the camera and the PC - or anything with a USB port or wireless.  Any who can verify that the T3i works the way I think - I'll run a USB cable from the camera to the PC and I can get the pictures from your camera easily, such as access to a hard drive?  Or I'm wrong about this?  I need a USB cable which is 10' long or so, that too, I think not is a problem, but it would be good to hear that someone else is using it in this way and it works.

  I'm also looking for a recommendation of the lens, as I'll probably buy the body only instead of getting another 18-55 mm.  I would like something with a little more possibility of zoom (to get a little tighter), and it would be good to have a macro capability.  Any suggestions on a Canon lens?

  Last question - I would like to have a bigger screen connected to the camera, to get a bigger view of what I'm shooting or just being shot while still in the camera.  I can do it with a T3i?

  Thank you

  A T3i will do anything you ask.  BTW, it does not use a CF card; It uses SD cards.

  It will ship with a short USB cable but you can get "powered" USB cable 75 feet long or more.

  You can attach the T3i a laptop with Lightroom.

  Best buy in a Canon lens is EF 24-105mm f4 L.  No lens will Excel in all possible situations. Thus, the beauty of a DSLR like you can taylor the lens to use. But it will come very close.

• How to make a video downloaded from my camera with an extension. MOV to work in Media Player or moviemaker?

  I need to edit a video that I downloaded from my camera.  He got a .mov for file extension.  Doesn't work in all Microsoft products.

  Wow! 18 Megapixel,... who are quite a camera.

  I downloaded a file .mov on the following site
  and it was too advanced for my system to cope.

  Canon - EOS Digital Rebel T2i SLR
  http://www.steves-digicams.com/camera-reviews/Canon/EOS-Digital-Rebel-T2i-SLR/sample-photos-83.html

  I don't have a copy of the commercial version of Apple Quick
  Pro time, but maybe he could convert.

  Anyway... you can try the following converters but I
  cannot guarantee that they work for you.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.filehippo.com/download_super/
  (Windows XP / Vista / 7)

  (3) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (4) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (5) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Although it is not freeware... the Xilisoft Video Converter
  has seemed to make the best conversion.

• How to assign a drive letter on a Portable device?

  I have a Canon Digital Rebel XSi and I am on Windows 7.  I would like to have the images automatically copied to my hard drive, when I connect the camera.  When I connect the camera via USB, it shows fine in portable devices.  The problem is that the path is Computer\Canon EOS DIGITAL REBEL XSi.  I can't get any third-party software to recognize as a path valid (because it does not begin with something like F:\), I can find no way to get Windows 7 to assign a drive letter to the camera directly.

  Is it possible to assign a drive letter to the camera or get a third-party software to recognize Computer\Canon EOS DIGITAL REBEL XSi as valid a path?

  Hello

  In addition to the response of Gaurav;

  Please follow this guide to change the drive letter and restart once fact: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Unable to show the 700 d even canon RAW photo files after download of Canon codec.

  Just got a new digital camera from canon 700 d. updated canon 400 d.

  I am using windows 7 32-bit and used to be able to view raw photos in my old 400 d windows Explorer, but now I get an error message saying that windows is not recogise the raw format. I have updated to the last cannon and the microsoft codecs, but still cannot display files.

  Thank you

  This is because the codec does not yet support your camera according to the http://www.microsoft.com/en-us/download/details.aspx?id=26829

  • Microsoft Camera Codec Pack provides support for the following formats of device:
  • Canon: Digital Rebel XT, Digital Rebel XTi, EOS 10 d, EOS 20 d, EOS 30 d, EOS 40 d, EOS 50 d Digital, EOS 60 d, EOS 300 d, EOS 350 d, EOS 400 d, EOS 450 d, EOS 500 d, EOS 550 d, EOS 600 d, EOS 650 d, EOS 1000 d, EOS1100D, EOS 5 d, EOS 5 d Mark II, EOS 5 d Mark III, EOS 6 d, EOS 7 d Digital, EOS D30, EOS D60, EOS Digital Rebel, EOS Kiss Digital , EOS Kiss Digital N, EOS Kiss Digital X, EOS Kiss F, EOS Kiss X 2, EOS Kiss X 3, EOS Kiss X 4, EOS Kiss X 5, EOS Kiss X6i, EOS Kiss X 50, M EOS, EOS Rebel T1i, EOS Rebel T2i, EOS Rebel T3, EOS Rebel T3i, EOS Rebel T4i, EOS Rebel XS, EOS Rebel XSi, EOS - 1 d, EOS - 1 d, EOS - 1 d Mark II , EOS - 1 d Mark II N, EOS - 1 d Mark III, EOS - 1 d Mark IV, EOS - 1Ds, EOS - 1Ds Mark II, EOS - 1Ds Mark III, PowerShot G1 X G2, PowerShot G3 PowerShot, PowerShot G5, G6 PowerShot, PowerShot G9, PowerShot G10, PowerShot G11, PowerShot G12, PowerShot G15, PowerShot Pro1, PowerShot S90, PowerShot S95, PowerShot S100, PowerShot S110, PowerShot SX1 IS, PowerShot HS SX50

  and read the info on the Canon site, their codec stand alone does not support the 700 d.

  See if FastStone http://www.faststone.org/FSViewerDetail.htm works with your new camera.

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298

• My usb device is not recognized / malfunctions since flashing the bios.

  I have a Canon EOS Digital Rebel Xt, and since I flashed the BIOS I get a message saying that the USB device has malfunctioned.  I reinstalled all Canon software and drivers, disabled/uninstalled all... so frustrated USB hubs... anyone?

  Hello

  Thanks for asking!

   

  You may not use the Canon and get message that peripheral USB has malfunctioned.

  What is the brand and model of the computer?

  As you have flashed the BIOS, I suggest you to contact the computer manufacturer for help with this issue.

  If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Third test. I need the software EOS Rebel, how do I get it?

  I made the mistake of making an upgrade of hardware on my computer and some software was lost. And I can't find my disk for my EOS Rebel XS/1000 D. I would like to be able to use my computer with my camera, but requires the software to do it. Where do I get it?

  Oh... Sorry, it's hidden in the 1DX link but it should work for all Canon camera - EOS Digital Solution disk download.  You will need the s/n for it.

  http://USA.Canon.com/Cusa/consumer/products/cameras/slr_cameras/eos_1d_x?selectedName=DriversAndSoft...