EOS Rebel T3 battery problems

Similar Questions

• Extraction of EOS Rebel XS battery failure

  Open the lid of the battery compartment and turn the battery lock there is no extraction of usual battery at all... It remains in its original position in the compartment. Please notify

  Glad it worked.

  I really don't think it was from swelling, this is the area of contact plastic which is too tight for the contacts of your camera.  I had two batteries for my 450 d who did this, and it was a question well documented with many generics I found on Amazon.  I kept using mine, but if he comes to you, they are pretty cheap to replace.

  I just created a zipper of flossing as described above.  Alternatively you could just leave your little Ribbon on it (even if the glue could weaken over time and detach).  The good thing about flossing, it is pulling from the bottom, instead of the upper part where the glue is attached.  There was plenty of room in the battery compartment to the tail, and I never had any problems with it.

  In addition, if there is a label on the battery, remove it.  That fixed the problem for many online.

• Problem with flash Speedlite 320EX and EOS Rebel T3i (EOS600D)

  Hi, for about 18 months, I've used this combination without a single glitch or problem. I bought the Speedlite old second hand, and all died on me in Nov. The guy I bought said it was about 3-4 years wneh I t so I thought that I just replace the same model, but buy a new one this time.

  Since it seems however not the flash unit at full power at times and at others seems not synchronized with the shutter. Sometimes it works fine, but then doesn't flash at all or has a problem that I describe above. I have returrned the flash at the company and they said their technician checked and it works fine.

  Anyone else have these problems or indeed solved these problems? Any suggestions would be very welcome.

  Thank you in advance.

  PS. edited title because I just discovered the EOS600D called the EOS Rebel T3i in the USA. I'm from Scotland.

  Other wrote:

  Thanks, yes I tried to situate the flash every time, as well as all the parameters of compensation. What seems to work he left for 10 minutes, this iften solves the problem, and I can carry on shooting images for another period. So confusing and frankly boring.

  Bravo for the answer.

  Brian

  Ten minutes for each flash? In theory there could be something wrong with the condenser and the unit needs service.

  Ten minutes, then you can fire flashes several before he had to rest again? Most likely, the batteries are weak or inappropriate to the task. Make sure you use Eneloop pros. Most serious photographers think that there is nothing better.

• camera battery problems

  I have a Canon EOS T3i rebel who has not had problems over the years I've had up to now where it will not recognize a fully charged battery.  I have an extra battery and have tried both after recharging the.  I can get off a shot and then the red light turns on and doesn't let me go ahead.  I take the battery, re - insert and it will give me another shot.  On the screen the battery icon shows a fully charged battery.   Help.

  Thanks for the help on this site of problem solving.  It turns out that someone recommended checkinh map as the red light indicated to write to the card, more battery problem.  I'll definitely keep this site for future use.  Thanks again

• EOS Rebel T3 shutter speed does not not even on Auto

  Hello community Canon!

  I didn't know really how title this problem, but I'm absolutely stumped. So recently my EOS Rebel T3 has been really act. As either the mode I am on (automatic creation, no Flash, etc.), with the exception of the manual mode, the camera will be whatever all black or all white. This is due to the camera to take photos either 1/4000 or 30 "shutter speed (even on auto mode!) I don't know why he chose only those extremes for shooting, I turn in any light. Any thoughts?

  Elrond140

  First thing is to reset the camera to factory settings.  Cancel all the settings, remove the battery from the day to the next.

  Then, you must make sure that the battery and charger will not function properly.  It is basic, but to do.

  And finally get a NEW SD of high quality which is fromatted by the camera, nothing else.

  Try again, with the camera on the green square and go outside with a good daylight.

• Canon EOS Rebel II value?

  I'm having a lot of trouble finding my camera on the internet anywhere. I want to sell online but don't have an idea of what a fair price. With it, I have a unopned new duracel battery, a can of unopned 35mm film of York. There is no lens, but the camera itself is in excellent conditon. I can't find a model number, just a reference number? stamped on the bottom.

  Here's what I know:

  It says Canon EOS Rebel on the front and the front corner, there's the Roman numeral II (two).

  On the bottom it says Canon Inc.   Made in Taiwan 5216757 that's all.

  I'm totally confused, please help so that I can sell this product at a fair price to someone who will get use out of it! Thank you!

  P.S. I can post pictures using html if this will help

  Hello, CraigslistCam!

  Take a look at this link

  In the list on the bottom, it shows the Rebel II as one of the 'alias' of this same organization (EOS REBEL II [A] / EOS 1000 N [E]: without QD and function of flash).

  We hope this helps!

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• iPhone 4 s - battery problem

  Hello

  I have an iPhone 4S running iOS 7.1.2 who must break with the battery problem almost entirely.

  I don't know if it's a hardware problem, but I hope that it is a software problem so I will try to do everything as my possible to isolate and software problem.

  I did a reset on iOS, but it does not solve. The next step should involve a DFU reset using iTunes but it will update my iPhone to iOS 9 and as far as I know it will turn my iPhone unusable.

  The other possibility is it back to iOS 6.1.3 but it won't, I must do a restore to iOS 9 which will be a problem.

  Yes, is there something I can do without updating to iOS 9?

  What makes you think this update to iOS 9 will make useless iPhone?

  Please read here > identify your iPhone - Apple Support model

  Read also here > update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  Last read here > get help with hardware on your iPhone, iPad, and iPod features touch - Apple Support

• Satellite U940 - battery problem

  Hi, my battery LED doesn't turn on when it is plugged. My laptop is plugged in but does not support. AC adapter works fine. Is this a battery problem? Do I have to buy a new battery?

  Is this a battery problem?

  No doubt...

  Do I have to buy a new battery?

  If there is battery failure, the battery should be replaced.
  But if your warranty is valid I recommend asking an ASP in your country for assistance... perhaps it could be replaced in warranty...

• "Erase content and settings" help battery problems?

  Battery life of my iPhone of 6 has problems. All of a sudden, the battery started to die very quickly. Sometimes my iPhone at 30% and I have to keep it on the charger for most of the day. Will help to "erase all content and settings '?

  If some app is the origin of the battery problem, then the clear operation will help, because it gets rid of all applications.  If its still bad after the operation to clear and without restoring from a backup, then it's a hardware problem.

• Satellite P300-172 battery problems

  Hello.

  Hope you all had a good Christmas and can hopefully help out me.

  I bought a laptop P300-172 awhile back.
  Now, even after the sinking of a large number of power settings, the battery life was poor.

  So I ordered a replacement from ebay (part 3rd battery) the battery is identical to the Toshiba battery in everyway of course the only difference is there was not an a toshiba.

  in any case, when the battery arrived I plugged it and the battery LED came on to show that he was charging, when I booted up my laptop (with vista) windows showed that there was no battery connected, I thought strange. But I did back and let it load, after an hour or two charging orange led started flashing which it never did.

  Still, I booted up vista and windows showed there is no battery connected. I have contcated the seller and assumes that the battery was faulty, as chance would have, he repaid the article and I went back to the normal toshiba battery.

  I had another battery, ordered through work and that is identical in every way, once again, except that it was another 3rd party battery and which does exactly the same thing.

  Can anyone help?

  I've updated to the latest version of the BIOS (3.9) and have tried many steps as leaving the laptop without the battery for 30 minutes and then insert the battery. update the bios.

  Well that's about all I can think and have read through the forums.

  I appreciate may give any information you guys! Sorry for the long message.

  If I were you I wouldn't assume more battery problems and return the phone to the place of purchase, if you can.

  The problem is out of your control, as you have tried multiple batteries. Just give him place of purchase to watch. Then less grief for you.

  Good luck.

• Re: Satellite T - battery problems

  My laptop battery will not charge when connected to the power terminal. I also have to remove the battery to turn on the laptop, it turns with the battery connected.

  Can someone give me some advice or do I have to return the battery?

  Hello

  The warranty is valid?
  If so, then get in touch with a local ASP because I m not quite sure if it s only a battery problem.

  Usually if the battery would be affected so you should always be able to turn on the unit.
  I think there could be something wrong that should be checked by an ASP.

  Good luck

• TECRA 9100 battery problem

  Similar experiences to mine, please?

  After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

  At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

  Hardware malfunction

  Call your provider of support material

  NMI: channel check / IOCHK

  The system stopped *.

  A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

  Yet once which seems to indicate a battery problem, I guess?

  Has anyone else had a similar experience?

  Post edited by: Gary S Cooper

  Hello

  Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

  On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

  Good bye

• Satellite Pro A120 battery problem

  Hi all

  I have a portable Satellite Pro A120 and is a battery problem a month ago.
  The battery is not new, but recently changed, 6 months ago.
  Until a few weeks ago, it lasted about 2 hours when full load, until this time
  suddenly dropped 30-40 minutes.
  In addition, sometimes the power of the laptop turns off when it's a few extra vibrations,
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  I initially though that there was a problem with the battery or the battery contacts, but they seem ok.
  I tried to unload it in my laboratory of the company with a power resistance: resistance absorbed 1A continuously for more than 3 hours. As the specification 4400mAh battery, I would say that the battery is ok.

  Is it possible that I have a problem with the battery inside the pc management circuit?
  The battery stress test above seems to show that the charging process is ok. So the problem might be with
  the provision of monitor or battery power.
  Someone at - it experience of similar problems and maybe a solution.
  Or perhaps a work around? As excluding the battery monitoring and auto turn off

  Thanks in advance
  Concerning

  > Is it possible I have a problem with the battery inside the pc management circuit?
  Perhaps, but that's just a guess only a cellphone technician may provide an exactly the answer to this question.

  > Furthermore, sometimes the power of the laptop turns off when it's some additional vibration.
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  It is very strange, I want to say if the contacts of the battery and the battery would be ok, this symptom shouldn't its sounds strange for me, so maybe that's the key why battery don't not lasts more than 30-40 min

  However, I think you should try a new battery before checking the motherboard.

• Satellite A60-108 battery problems

  When I don't have the AC adapter is plugged into the laptop either-

  A. the laptop won't turn on the blue light illuminates to and starts on for about 2 seconds or

  B. If I take the adapter out when laptops on it turns off

  However if I keep the adapter on its totally fine marketing and race, it is a battery problem? ne1 can help?

  Thank you

  Hello

  It seems that the battery is defect. Please contact the partner customer Service in your country and ask them if the battery is covered under warranty. AFAIK it battery is covered for one year. How old is your laptop?