EPrint does not not on iPad after activation of the e-mail

Similar Questions

• Safari does not load pages after sleep in the active window

  Please note: I'm French, so what you read is not perfect. Thank you.

  Hi everyone, it has been so long that I tried to solve my problem on Safari.

  Let me explain what happens: when I wake my Mac, some site not loading, including Youtube, Facebook and Google until I

  -Close the Safari window and open a new

  -Wait at least a minute or two

  -Spam the shortcut for refresh up to what a "page not found" error.

  I tried all explained in this or other forums and do these things:

  -Reinstall the operating system (but keeping my data)

  -Restore with a Time Capsule

  -Open the terminal and type these commands:

  -Fixed permissions and owner

  sudo find ~ $TMPDIR... - exec chflags h nouchg, nouappnd, noschg, nosappnd {} - exec chown () $UID h - exec chmod + rw {} + - exec chmod () n h ++ - type d - exec chmod h + x {} + 2 > & -.

  -Reset Safari

  MV ~/Library/Safari ~/Desktop/Safari-'date + %Y %hour %m %d ' %s; RM - Rf ~/Library/Caches/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~/Library/Caches/Metadata/Safari; RM - Rf ~ / Library/Caches/com.apple.Safari; RM - Rf ~ / Library/Caches/com.apple.WebKit.PluginProcess; RM - Rf ~ / Library/Cookies/Cookies.binarycookies; RM - Rf ~/Library/Preferences/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~ / Library/Preferences/com.apple.Safari.LSSharedFileList.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.RSS.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.plist; RM - Rf ~ / Library/Preferences/com.apple.WebFoundation.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginHost.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginProcess.plist; RM - Rf ~/Library/PubSub/Database; RM - Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState

  -Fix permissions with the inbuilt system tool

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  -Log in as a guest

  -Start in safe mode

  -Switch to recovery mode and put something else in the window "resetpassword.

  -Remove all apple leaves me with the GUI (cookies, cache, etc.)

  -Mess with network settings, but it's obviously very well because other programs have no problem for example. Chrome, Firefox, Mail, Push notifications...

  -Uninstall all extensions safari

  -Unplug my micro sd card and reboot (which is constantly plugged into my mac)

  I am so angry with my computer because I paid 1.5 k for a computer that is not able to make the task easier for a modern computer. Even a €50 computer has embedded software that can handle a resume from sleep without having to restart the entire software... Imagine if you had to do it on your iPhone, you will eventually get a refund within a week or less because it is not normal in 2015 to have this kind of problem. I hope that I have no problem with safari on my 6s and I don't plan to spend my browser because Safari is part of the Apple ecosystem and have the perfect sync and battery management.

  So I need to get this fixed a problem and I really need your help because a lot of people had this problem on the internet, but NEVER seen someone who explained how it happened is the correction of a problem. My Mac running the latest version of the software which is 11.2 starting today.

  Here is a video of the problem:

  https://www.YouTube.com/watch?v=AjfAlkKEVsc

  And some examples of the threads on the internet, I found the same problem:

  Safari does not work after the mode 'sleep'. Apple support communities

  Safari doesn´t supported pages after waking up

  Safari does not load page after waking up

  Facebook doesn't "work" after the awakening from the sleep - MacNN Forums

  Corruption Safari       See post by Linc Davis

• Pandora does not play.  After activation code says everything is ready - but does not play.

  Pandora will not play.

  It does not work.  I upgraded to TVOS 9.1 and it comes, sits there with the play button but can not get the Pandora began

• Tecra 8100 - does not start and no activity on the screen

  Hello

  My Tecra 8100 not start or take me to the BIOS Setup. It lights up, swirls the hard drive, but there is no activity on the display. The only way I can get something on the screen is turning with the F12 key when I get the 'ready for the update of the BIOS. Place the BIOS update diskette in the drive "... message. So I tried the traditional method of updating the BIOS, found on the Toshiba site, but nothing helped. The machine seems to read the disk (that contains the downloaded BIOS) but does nothing. It is just there for centuries, with the disk light.

  The last two days I have trawled thro much views and even took the whole machine goes to check the connections loose, but I found no answer yet.

  Can someone out there please help?

  Thank you very much

  Hello Rory

  I did the BIOS to be updated several times, but I've never seen this message at startup upward. You did it the traditional method as described in the document which you will find under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07?

• waitForUpdates method does not detect updates after reset of the connection

  Hello

  In my case, I use waitForUpdates() method to detect the VMotions (. i.e. whenever a VMotion arrived I have trying the GET the update using this method). It works perfectly in case of normal use.

  But all of a sudden after a reset of VC connection. This waitForUpdates() method makes me not updated.

  When the session id gets modified waitForUpdates (propertyCollector, version) would also have a new propertyCollector object (to give you the new collector of property obtained with the new connection object), so even now why it does not return me the updates after the reset of the connection.

  Please let me know if I'm doing something wrong in the treatment of this.

  Please let me know how to handle the connection reset and collect updates later.  Which can affect the waitForupdates in updates outside the collector property object to return.

  I even tried with the checkForUpdates method was the same behavior.

  Thanks in advance.

  Please check if you create the PropertyFilter after reset connection. Good initialization of the filter property should solve your problem.

  Thank you

  Aditya

• JavaScript does not work, even if activated in the preferences

  OK, so javascript does not work in my Firefox. I'm going to websites, try to activate some tabs, or similar, and nothing happens. Theres is a new site, which is linked to my University, and when I try to connect I get a message: Javascript must be enabled to use this Web site.
  Thing - it is turned on. I tried to restart (close-> close-> open-> mozilla mozilla activate on-> close mozilla-> open mozilla-> go to the website) but no dice...

  When I try to use IE, everything works, so I have NO idea what to do... Can anyone help?

  Hello

  Please check if this occurs in Safe Mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

• HTP.p does not like usual after upgrade to the apex 4.2.6

  Hello everyone,

  We have recently upgraded the Apex 4.0.2 on Oracle 11 g using Embedded PLS door of entry to the Apex 4.2.6 on Oracle 11 g using ADR.

  The initial series of unit tests seemed well until a few questions supported around "htp.p".

  The scenario is like this:

  1. the user fills some fields on the page-10 and click the Save"" button.

  2. This button then performs a redirection to a pop up page where some inputs more are invited to enter.

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend (as after presenting processes).

  II. another PLSQL block is executed, which closes the popup windows and returns the control to the parent page.

  This is achieved using htp.p...

  For example:

  HTP.p ("< body > '");

  HTP.p ("< script type =" text/javascript "> '");

  HTP.p ("var alertMsg =" &. P38_PO_AMOUNT has been paid";");)

  HTP.p ('javascript:Alert (alertMsg)');

  HTP.p ("window.opener.location.href =" f? p = & APP_ID.:7: & SESSION.) " ;") ;

  HTP.p('window.) Close (this);') ;

  HTP.p ("< /script >" ");

  HTP.p ("< /body >" ");

  The anonymous block under step 3.i. is well executed and done what it takes in the backend.

  Its the next step which is driving me crazy, I tried to add debugging but to no avail.

  The weird part is that the message "& P38_PO_AMOUNT. has been paid' getting appears on the pop-up itself instead of parent.

  Any ideas or pointers to this problem would be a great help. I have come to the forums and metalink for any position and had no luck so far.

  Kind regards

  Madhu.

  Hi Sunil,

  Thanks for the reply and apologize for the delay in responding.

  But 2 doubts which do not appear in your code:

  1. why you placetag through PTH again? Body will be already present on the page 7

  2. What is "this" in your window close event? 'this' will be indefinite in my opinion

  Thetag and the reference to 'this' was used because the application was developed first on Apex 3.x

  This piece worked through the upgrade to 4.0.2 and it starts to play up only after this upgrade (to 4.2.6).

  I had followed the suggestions from the link you posted, made some changes and the flow is as follows:

  1, as well as the original

  2 as well as the original

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend, under process, like submit it: after calculations & Validations.

  II. the 2nd block PLSQL for close & redirect the page is now part of 'Branch of PL/SQL procedure' with branch point ' on Submit: after the treatment (after calculation, Validation and treatment). The PLSQL code is as follows:

  BEGIN
    htp.p('');
  END;
  

  The behavior is always the same and seems not to have changed. I'm a little lost, try different options.

  I'll try to reproduce the scenario on apex.oracle.com and in the meantime of inputs/suggestions would be helpful.

  Kind regards

  Madhu.

• can not activate iPad after extinction

  can not activate iPad after extinction

  The iPad battery is not empty? If this isn't the case, then have you tried a soft-reset/reboot to see if that gets it to start? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• Creative cloud does not remember IDs after the computer restarts

  Creative cloud app does not remember login after restart of the computer, or simply when it starts after having turned it on. The app starts up fine and appears in the notification area (Windows 64-bit 10), but I have to log each time until I can get updates, etc. This problem started about 3 weeks ago and I still have to find a solution. Does anyone know how to fix this?

  In this case I advise you to Contact customer services as technical troubleshooting may be required.

• How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

  TT2

• iTunes does not recognize iPad 2 Air

  I bought 2 new Air 2 64 GB iPad the other day because I could get dirt cheap. I opened one and tried to connect to iTunes because I planned to use that one. ITunes or Windows will recognize the iPad at all. I don't not even a popup. I checked iTunes and I have the latest version (12.4.3) and I tried to remove and replace. I changed several cables load, all brands of Apple and PCs (only Windows) has also changed. The dang thing still does not appear. I even tried the suggestions on If iTunes recognizes not your iPad, iPhone or iPod - Apple Support although I can't find without success.

  Just to be absolutely sure, that I also tried to plug my old iPad 4 and iPhone 4S that I know for sure used to be able to connect to iTunes. They also failed to appear. I suspect that it is maybe the new version of iTunes, so I've just updated, but I can't be sure. I am running out of ideas and have no idea what to do more. If anyone has any bright ideas, please share them! At this point, I'm willing to try anything. Thank you!!

  UPDATE: Ok, so I have not descended to iTunes 12.4.2 and so no chance. Then decided to downgrade to 12.1.3 and success! He finally appears. This is the stupidest thing I ever saw, but whatever, I finally got it to work. Found the solution to my problem. Thank you all.

• Portege R30 does not SSD start after upgrade SSD and HDD

  Hello

  I have improved my Portege R30 - A to add a second SSD (Crucial M550) replace the optical with the new SSD drive with caddy.

  But now the system does not start automatically from the original SSD.

  I could press F12 while turning on my laptop and make it appear the start guide. Here I can see my original SSD and I can boot from it properly.

  In order to boot in the BIOS, I see only the HDD/SSD, USB, ODD memory... It doesn't gives me the possibility to choose between SSDS.

  In any case when I boot in this way than getting blue screens after awhile in win7.

  I tried to install a HARD drive as the second drive instead os SSD and her resut is the same.

  Is that what I can do to solve this, now I have to use the second drive as an external USB drive.

  Thank you

  Hello

  This ODD of SSD/HDD replacement is not always possible and in many cases, the BIOS will not handle and will not recognize the new HARD disk correctly.

  That I can remember some old laptops Toshiba Tecra and Portege that supported the functionality of Slim Select Bay were able to manage the 2nd HARD drive instead of driving WEIRD, but this was not possible due to the available selection slim Bay.

  In your case it looks like the laptop so that the BIOS does not support this function and, therefore, the additional SSD/HDD isn't recognised correctly.

• Nighthawk D7000 does not recognize DSL after firmware update

  After updating firmware for V1.0.0.38 my D7000 would not recognize my AT & T DSL, no dsl or internet light connection.

  A round and round with netgear TS and told me that the firmware would not cause. I paid for an extended service get this problem fixed. After AT & T came home and verified that all signal completely to modem was good, TS decided that my modem was bad and I paid to get a new delivery.

  Connected a new place and still no DSL recognition. This unit was V1.0.0.32.

  I downloaded the V1.0.0.18 firmware and the problem disappeared. I'm back up and running.

  I tried the next most recent firmware and the unit would not recognize my DSL once again.

  So, I'm under V1.0.0.18 and it seems to work very well.

  What is the problem with that?

  Don't know if you have this problem solved yet but that's. That's what I had to do.

  You will need to download the * *.18 firmware. something of higher que.18 does not work, tested!

  Connect the modem and connection with the connection on the bottom of the D7000.

  When you open a session go to the menu update firmware. link to your downloaded software. I will ask if you want to because of the older firmware, say Yes. Be patient and let it work.

  Now, you will get the LEDs ADSL and internet.

  You must have your ATT internet connection and the password to complete the installation.

  Mine works fine, for DSL sucky service.

  Good luck!!

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• ePrint does not print web pages of Tablet Windows 8 Microsoft Surface

  ePrint does not print web pages of Windows 8 (x 64) Microsoft Surface Tablet

  Any ideas?

  Hello JereTanner,

  Welcome to the Forums of HP Support!

  I see you are trying to print web pages of a tablet of Surface. What model printer you are trying to print to? Also, is there an error, message, etc., when you try to print?

  In general, ePrint is used when printing emails or transmission of documents / photos to the printer address, is the next how you try to print a web page?

  Since it is a Windows 8 operating system, you can be able to install the full features software and print that way. When I know more about how you want to print, what happens when you try and which printer you are using, I will be able to help.

  See you soon,.