Nighthawk D7000 does not recognize DSL after firmware update

Similar Questions

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• Windows 7 password problem: does not recognize password after waking from sleep

  So I have recently buy a netbook with Windows 7 operating system. I create the administrator account and password protect. All right, install software, copy documents, etc. in the "My Documents" folder and happily use the machine for a few days with no problems. Then work off the battery voltage, put the PC in sleep for some time. When I try and log back in after the awakening of the PC, it does not recognize the password. Try with cap locks, off and all the rest, but not luck. I must finally remove the battery and restart. Sign in as normal (the password is recognized) and go in the user administrator account to disable the password, but then again, the current password is not recognized and I am not allowed to make changes. However, I can still close and log on by using the current password. Confused. Anyine have any ideas?

  There is no need to remove the battery or pull the taken when force a PC to stop. By pressing the power button for about ten seconds will do the trick.

  Your password problem: you might be dealing with a foreign keyboard problem. Make the password to something that is independent of the keyboard configuration, for example 123456.

  To reset the administrator password, follow these steps:
  1. click on start.
  2. type the three letters cmd in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands and press ENTER after each:
  net localgroup administrators
  (This will show you the accounts that have administrative privileges. What is?)
  NET user administrator 123456
  (This will set the password to 123456)

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Mac does not recognize Ethernet after failure

  We had a brief power failure this weekend and a couple of my Macs a brand-new Macbook Pro 15 "and iMac 21.5" end 2013 do not recognize Ethernet. tried several possible fixes I found online remove various preferences and other files that nothing worked.  I tried to remove the Ethernet interface to see that when I wanted to add once again it was no longer available in the interface of the menu drop-down.  I rebooted, zapped the PRAM and removed from many many files of network preferences, but nothing could him recognized through the thunderbolt adapter Ethernet of Ethernet

  At this point, I gave a little and save all the information of the user, a re-installed the operating system on the existing system using the network of restoration (R command).

  Everyone has had this problem before?  Is there an easy fix?

  Reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  The failure could have messed with the SMC on the computer, which essentially controls how the power is sent to the device.

  Also, have you tried to connect the devices with a new Ethernet cable? The cables themselves could have been damaged, or even of your router.

  Best way to test is to take one of your devices to somewhere with an Ethernet cable to test Ethernet computer port. This could be done in an Apple store if you are near one. Would help to determine if there is a problem with the computer or the router/modem or cable.

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• Windows does not start normally after Windows Update

  My computer does not seem to start more. Whenever it starts, it makes to the 'Starting Windows' screen, and then my screen goes black. My primary monitor does not receive a response, but my second monitor stays on until the computer restarts again. This happened last night after that my computer shuts down for the first time in a few weeks to install windows updates from July. I had updated windows to try to fix something with iTunes, which might have something to do with my problem. My computer was not showing any other kind of problem before that.

  Here are some other details:

  * I use Windows 7 Home Premium (Microsoft Windows Version 6.1.7601)

  * Windows does not load with normal settings but will load in safe mode.

  * System Restore never works in the system recovery (a non specifiederror occurred during system restore.) ((0x800700b7))  and sometimes says it works when I do it in safemode, but solves nothing. Yes, I tried using different restore points.

  * I think that my roots of the problem in the fact that I tried to restore my phone, but the computer could not install the drivers correctly.

  * Startup Repair does not detect it.

  Attempt to sfc/scannow in command prompt returns two different answers: "there is a system repair pending whice requires the restart ends.» Restart Windows and run sfc. "during the attempt to system recovery and" Windows Resource Protection found corrupt files and managed to fix their. " Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log"in Safe Mode with command prompt.

  I apologize if my description is a bit vague, but I need some urgent help with my computer. I tried all the solutions I've come across, but the same problem persists.

  Hello

  Sorry for the delay in response.

  Your problem has been resolved. Let us know if there is not, and we will be happy to help.

• Satellite L30-101 does not turn ON after Vista update

  OK well my laptop has played lately and I have installed the new update of Windows Vista.
  Now my laptop didn't boot.
  It just won't turn on. I tried everything and its not working everything simply do not.

  Whats gone wrong turned with her and is anyway I can fix it?

  Hello

  Do you mean the laptop does not illuminate or only the Vista operating system does not start?

  You see the home screen Toshiba appearing at the beginning?

  Feedback would be appreciated

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Equium A200-1VO does not run stable after BIOS update

  Hello

  I have a PSAF5E-002005KS A200-1V0. I updated my bios to help what he '20080212105826.zip' file and it doesn't seem to be as stable as it was before.
  It get error messages different copy, msdos errors etc.

  Can I return the bios to the original one and where can I find this please?

  Brian

  Unfortunately, the first version of the BIOS can be installed by a technician of the ASP.

  But I wonder about the error messages that appear after the update of the BIOS.
  Have you tried to reinstall the OS from the recovery CD? You must test the laptop with the factory settings!

  By the way; access the BIOS and set the defaults. And don t forget to save changes ;)

• iPhone stuck in DFU and PC mode does not recognize device after installation of iOS 9.3.2 failure

  So today, I decided to upgrade my firmware to the latest 9.3.2 via iTunes 9.2. Everything was fine. Both PC and iTunes recognized my phone and the upgrade process was fine, until suddenly I'm met by a mistake to say that the update failed, which was then followed by an immediate blue screen of death, with the error pointing to 'asmtxhci.sys', the XHCI Host Controller Driver of ASMedia Technology Inc.. My phone is then stuck in DFU, and my PC mode and iTunes refuses to recognize my device. I checked Device Manager and noticed this strange spectacle:
  

  It lists somehow my camera as two separate. I tried to install the drivers manually from "C:\Program Files\Common Apple Mobile Device Support\Drivers". I managed to install the drivers for the DFU mode (but he didn't) I met for the first device, but when I tried for the second device by mistake 10 "device could not start" or something like that.

  I don't know how to proceed from here. I tried so many stuff, read so many other messages, but I have not seen anyone with my problems, that's why I went here. I'm half - panic right now...

  This sounds like a rather nasty problem - maybe a conflict with ASMedia USB and Apple Mobile Device Driver.  If you do a Google search on "asmtxhci.sys" you may reports of this cause the blue screen of death (BSOD).  There are a few patches recommended, but I'm not going to suggest anything as I'm not familiar with any of them and they could cause various other problems (even worse).  Good luck!!!

• does not recognize password after abnormal termination

  My son said all he did was turn my computer on, plug his ipod for 10 minutes, then press the button close instead of using the mouse on the screen to stop.  In other words, he started and shut it off using the button on the cpu.  I didn't know what he had done until I went to use my computer and it wouldn't recognize my password so I could access my computer.  I asked who was on my computer and what they were doing.  Any ideas?

  many people do not have this but there is a built-in account called Administrator that, by default, no password. Try this restart, press F8 repeditavly until you see a windows advanced startup options select Safe mode with the arrow keys and press ENTER twice. then try to log in as an administrator. If you use the Welcome screen, and you don't see no admin press ctr + alt + delete twice and type Administrator and leave the password empty. Then you can use user accounts in Control Panel to reset your password.

• 97like program MS access does not recognize date after Dec 2010

  For business purposes I use a 3rd party program based on MS Access 97. On both computers, an old and a new, the program doesn't recognize any date after December 31, 2010. What should I do to make this program work?

  May I contact the seller? If the application is the same age as Access 97 who is 13... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Page Add-ons does not recognize that I have updated flash player

  I've recently updated to the latest version of Flash player (18.0.0.209), but the update and add-on pages tell me that I am using 18.0.0.194. I tried to reset the file pluginreg.dat and all the other options I've seen on through research to help but nothing works. Any help?

  What do you see on the topic: plugins page?

  You can find the installation path of the plugins on the topic: plugins page.

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  You can view the installation folder of Flash player for multiple Flash player plugins and delete older versions of the plugin (NPSWF32) and possibly (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

  You can find the latest versions of Flash player for Firefox on this page:

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?