ePrint on iOS 5.1.1 5.0.1 can't find my wireless printer / Airprint does not work

Printer model: HP Photosmart 5510

Model of router: Linksys WAG120N

Devices and operating system: the new iPad, iOS version 5.1.1

iPod 4th generation, iOS version 5.1.1

ePrint , installed on both devices, version: 5.0.1

Application Description: I can print "Via a local Wi - Fi network: easily identify HP wireless printers available on your network."

This doesn't seem to work on my network described above. whenever I want to print a document, it requires activation to the ePrint online service. I have this, provide the email address printer, but in this case, the document must be printed is sent to HP ePrint Center then back to my printer and not directly through WIFI.

In addition, Airprint works only onetime after I restarted my printer, so it is no more.

I'm just disappointed with all combinations.

Can you please support me in this issue?

Thank you.

Hello

To print from an iPhone using HP ePrint or Airprint network must use the multicast Apple Hello service depends on.

According to similar discussions, it seems that the multicast is not supported by the specific router model:

http://homecommunity.Cisco.com/T5/cable-and-DSL/WAG120N-wont-AirPrint-to-HP-printer/TD-p/371737

https://discussions.Apple.com/thread/2656668?start=75&TSTART=0

It seems to be the lack of support of your envoirnment network.

To ensure my suspicions, try please perform following steps:

  1. On the printer, press the wireless icon, and then press the settings button.
  2. Select Restore Defautls network.
  3. In the same menu, tap on wireless and make sure it is set to.
  4. Since the iPhone, go to settings.
  5. Tap on WiFi.
  6. Select the printer SSID (will include 5510 or B111 in the name of the network)
  7. Allow 2-3 minutes to establish the network connection, now the iOS device directly connected to the printer.
  8. Now try printing using HP ePrint or Airprint.

I think that you will be able to print without problem... which means the problem caused by the router...

I recommend you contact Linksys support and check for any possible solution (e.g. Firmware update), however, it seems that the router does not support the requirements of connectivity Hello...

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • print screen does not work with ios 10

    I used to take screenshots by pressing the sleep/wake button and the home button. with ios 10.01, it no longer works. even if I get home before the sleep button sleep. even if I press them together very quickly. It does not work. I tried several times by pressing on quickly. I tried to restart. still does not work.

    Hi laurannso,

    Thanks for the update to iOS 10! I understand that you have problems with taking screenshots with your device. You can try a simple reboot of your iPhone. Restart your iPad, iPhone or iPod touch

    If restarting the device does not resolve the problem, try to save your iPhone restaurant next to the factory settings.

    The backup of your iPhone, iPad and iPod touch

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    These measures should have your screenshots works on your iPhone, as expected. Please use the Apple Support communities to post your question.

    Take care.

  • 4500 e all-in-one desire: ePrint (Google print clouds) does not work

    Hey, HP Experts.

    Thank you very much for the maintenance of your answer!

    It happens that I have a problem with HP ePrint. I can't print to my printer. I checked on the trendy Center of HP printer and it say that it is ready to print.

    The printer goes through Google Cloud Print, so that chrome of our school books can print. Just stoped working last night.

    On printer copy works but remote printing is not.

    Data sheet:

    Want to 4500 e - all - in - one

    IPv4 network

    Customers of Google Chrome OS

    Google Cloud Print

    My brother has solved the problem:
    He has disabled the ePrint service and raise it. It has generated a new emailaddress and he relinked it could Print. We tested a page to print and it worked! Thanks for your help!

    I sent [email protected] but I got no reply apart from Claris emailer auto response that my email has been received. I did not like this... I was ~ 2 weeks.

  • Update iOS 9.3.1 fix does not work

    I updated my iphone 6 this afternoon with the new fix for ios apple posted 9. The new update, ios 9.3.1 is supposed to fix bugs in applications, but it still does not work! The links are still corrupt in safari, and my Gallery of photos, videos and instagram all still close without warning.

    My iPhone 6 s + is the same on 9.3 I would tap iCloud in the settings and it would open iCloud but immediately go back to the front where the icons are and close iCloud in settings before I had the chance to enter my id . Now with 9.3.1 is not different

  • IPhone update IOS 5 9.2.1 - now camera / flashlight does not work

    I have recently updated to latest iOS... now my iPhone 5 won't take a picture, lamp Pocket does not work and I can't do FaceTime.

    Can I use the front camera, but when I swap to the back camera, the picture is of me (always in front of camera) is either blurred or that I show up to 90 ° (despite my phone in portrait and landscape image) on my side.

    It is a SOFTWARE hardware not question... I tried the hard reset, I'm at the end of my home and want to know when Apple will acknowledge this problem and release a patch?

    Have been converted to Apple since the 3GS, I'm really tired.  messages displayed to indicate here Apple says it's a hardware problem, in my case everything was 100% fine until upgrading to iOS.

    Help!

    Try to set it back to factory settings without using backup later. If it does not back the camera feature, do check the device by Apple or an Apple authorized service provider.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    Apple iPhone - contact Support - support

  • iPhone 5 home button does not work after ios 10

    My 5 Iphone Home button does not work after update final IOS version of 10.

    The home button works on the first push to wake the phone but it will not open the phone the second button.

    I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

    You attempted to restart your phone?

    You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

  • iPhone 5: objective of the camera does not work after update iOS 10

    Hello everyone.

    I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

    I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

    The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

    I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

    PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

    Hello

    I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

    After this answer please.

    Thank you Will

  • AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    Try these steps, check to see if things work after each step if necessary, before you try the next.

    1. Check AirPlay is on the Apple TV (turn market if it already is)
    2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
    3. Restart the Apple TV (settings > general > restart).
    4. Restart the Apple TV by removing ALL cables for 30 seconds.
    5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
    6. Restart your computer or mobile device.

    If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

    If your problem is AirPlaying starting a computer, try turning off bluetooth

    If you're still having problems, the following article can help you.

    Troubleshooting AirPlay

    Troubleshooting connections and Wi - Fi networks

    Recommended Wi - Fi settings

    WiFi Diagnostic Software (for Mac users)

    You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  • notifications of iOS 10 does not work

    Given that I have upgraded to iOS 10 on my iPhone 6 and got my new iPhone 7, my notifications do not work properly.  I used to get notifications of many different applications.  I have notifications enabled in the application and in the settings.  I've had several people look at and others noted that they are not getting them as well.

    any suggestions?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • SHIFT key does not work on the bluetooth keyboard connected to the Air ipad on ios 10

    the ipad reboots when we use the uppercase key on the air of the iPad. And in some cases, it shows the changing language selection when the SHIFT key is pressed. The keyboard is perfectly fine and works with ipads o

    I also have the same problem.

    I use 2 keyboards, Bluetooth,

    A wireless Apple keyboard - I mean Magic Keyboard

    The other is universal foldable keyboard from Microsoft

    After updating iOS 10.0.1, Caps Lock does not work, but change language or restart the iPad or it's like restarting the application (kick out of the home screen),

    I thought it happened to MS only the product, but when I connected my Apple Magic Keyboard, the same thing happens!

    Difficulty please, Apple!

  • little emoji and emoji does not work with the new iOS update

    After installing the new iOS does not work. I uninstalled two emoji and re-installed. Does not work. Ideas?

    bitmoji has just released a new update today to correct this, check the app store for the update.

  • "Hey Siri" does not work on iPad Air after updating iOS 10

    iPad Air does not "Hey Siri".  On the other hand, Siri works when I hold the home button.  I disabled Siri and then turn it back on and did the same for the Air iPad and not luck.  My iPhone IS working as it should with Siri.

    Hi Charles!

    I see that you are curious, why "Hey Siri" does not work for your iPad Air after update to iOS 10. I know it's important to make sure that everything works correctly after an update. I'm happy to help you!

    Looks like your iPad model is not compatible with this feature, unless it is plugged into a power source. The problem persists while your iPad to the that air is charging? Take a look at the following Web site:

    Enable or disable the "Hey Siri" and customize the functionality

    To ask questions without pressing the Home button, plug your electrical appliance and turn on ' Hey Siri. With iPhone 7, iPhone iPhone iPhone 6s, 6s, 7 more more, iPhone and iPad (9.7 inches) Pro SE you can use this feature without plug power.

    Use Siri on your iPhone, iPad or iPod touch - Apple Support

    Have a great day!

  • Bitmoji keyboard does not work after last update iOS 10

    My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

    the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

  • Just updated to IOS 10 and replace text does not work

    Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

    I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

  • Apple pencil does not work after update to iOS 9.3.4?

    My Apple pencil does not work after installing iOS 9.3.4, I tried to forget this device and it Peel again. No change, it still fails. Any fix for that?

    Never mind y ' All, I reset my iPad Pro and all works fine now. Weird, but as long as it works all is good

Maybe you are looking for