EqualLogic used space after that rethinning differs in OS EQL group view

Similar Questions

• Not able to use iTunes after that put 12.3.3 updated

  Not able to iTunes after put 12.3.3 updated

  After installing update iTunes to 12.3.3 (after the prompt), I'm not able to use Itunes. When ever open in 10 seconds a pop-up message is displayed which says that itunes has stopped working. a problem caused the blocking of the program works correctly. Please close the program. two close options to obtain the program and the program to debug.

  Please help solve this problem

  Hello! Try the steps suggested here:

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  If you can't install or update iTunes for Windows - Apple supports

  I hope this helps!

• How to fix my "low disk space" after that Iv'e tried all system tools?

  I continuousy get a "Low disk space" warning even if I used "Disk Clean-up, System Tools, and I deleted everything in the area of recycling. I, again, restored to July 17 this year.

  My "Operating System" is "Windows 7 - Home Premium 32-bit." If someone reads this has already had this problem and solved, please let me know how to solve. My system has a 3.00 GB Ram and less than half has been used.

  Thans in advance for your help and my email is: * address email is removed from the privacy *

  Not enough space for which drive? This is a warning most likely a not enough space on the recovery partition.

  This occurs when Windows Backup is used without a dedicated external hard drive. Is that what you did?

  If so, access the recovery partition and delete all backups that you sent to there.

  Then you get an external hard drive and backup on it.

  Disk Cleanup removes temporary junk for the most part and only works its magic on the C drive.

• Cannot use airprint after that ios 10 update

  Put the print jobs to the Print Center, but still waiting... I have never seen before on ipad Print Center. Help!

  Look in your printer. Maybe it needs a firmware update to work with iOS 10

• Space after...

  I know this is possible because I learned to do a year ago, but I do not remember how

  I have a page of paragraphs, and I understand how to use the space according to designate the amount of space to leave between each paragraph.

  However, in each of my paragraphs, I've indented, of bulleted items.

  Which means, I "returns" within each paragraph, which means 'space after' that happens after every 'back' rather than just at the end of each paragraph.

  What should I do so that I'm in control of this?

  
  Thank you

  Marion

  There are two kinds of breaks, you can apply at the end of the line, a 'return' or paragraph break, using the key, or a return of 'soft' (forced line break) using SHIFT + ENTER.

  Single BUTTON triggers a new paragraph, as well as any shape or "next style" that goes with it. The forced line break starts a new line, but the paragraph is not finished, so you do not get any format changes.

  I don't know if that really addresses the problem, however. If might be more advisable to have some additional styles that allow you to have a paragraph without a space after, followed by a bulleted paragraph. It is impossible, for example, to set a withdrawal of negative coherent on the portion bulleted paragraph as part of a style, unless it's a separate paragraph. You can use a hyphen to the marker here, but there is no way that I know to stop the dash after that before the end of the paragraph, so you can't text not indented after the element bulleted in the same paragraph, if you do this.

• Create the view and by using the function that returns a type oracle

  Following is possible?
  
  A function returns an ORACLE object Type, and I want to use this feature, in my opinion, it is possible to access each field of the type once the function is executed and make a column in the view?
  

  create or replace TYPE SOME_INFO AS OBJECT
  ( 
    CHARGE FLOAT,
    SOME_DATE DATE,
    SOME_VAL VARCHAR(50)
  );
  
  CREATE OR REPLACE
    FUNCTION CALCULATE_INFO
      (
        p_chargeId NUMBER)
      RETURN SOME_INFO 
    AS 
    v_some_info SOME_INFO := new SOME_INFO(0, null, null);
  BEGIN
   
  -- function body populates the v_some_info
  return v_some_info;
   
  END calculate_info;

  Now, I want to use the function according to me - if the underlying query of the view follows-
  

   select c.*, calculate_info(c.charge_id) as someInfo from some_charge;

  How to recover someInfo.CHARGE, someInfo.some_date, someInfo.some_val? I can put them as columns in the view?
  
  If you use only functions that return a single value in a view?
  
  Thank you
  Mustapha
  
  Published by: Tina Giri on April 16, 2009 05:47

  How to recover someInfo.CHARGE, someInfo.some_date, someInfo.some_val?

  SQL>  create or replace type some_info
  as
     object (charge float, some_date date, some_val varchar (50));
  /
  Type created.
  
  SQL>  create or replace function calculate_info (p_chargeid number)
     return some_info
  as
     v_some_info   some_info := new some_info (0, null, null);
  begin
     -- function body populates the v_some_info
     return v_some_info;
  end calculate_info;
  /
  Function created.
  
  SQL>  select your_view.someinfo.charge,
         your_view.someinfo.some_date,
         your_view.someinfo.some_val
    from (select c.*, calculate_info (c.empno) as someinfo
            from emp c) your_view where rownum <= 3
  
  SOMEINFO.CHARGE SOMEINFO SOMEINFO.SOME_VAL
  --------------- -------- --------------------------------------------------
                0
                0
                0                                                            
  
  3 rows selected.
  

• Using the baseline grid and 'space after' for formatting

  I use InDesign CC on a MacBook Pro of the retina. I'm designing a document and you want to use a reference grid to align the text. I would like also to use the option "space after" in the definition of a paragraph style. I use the type of 10 points on the line spacing by 15 points. "Space after" is defined as 7.5 points.

  If I try to apply both database grid orientation and the specification of "space after", I basically lose my pt 7.5 defined "space after" a lot more space because the wells of the first line of the following paragraph to the reference grid line below. I find myself essentially with 22.5 pt instead of 7.5 pt.

  These two incompatible functions or y at - there a way around that I don't know?

  Thanks for any advice.

  There is no way around it. Best is to calculate your different leading.

  space before and space after values so that everything falls on a

  base line. In this way you avoid having to rely on "Align on the baseline." You

  can also turn on "skip dragging ' in Preferences > Composition if

  you have graphics with dressing in them.

• After that I opened my home page when I try to go to another page it opens twice. I use the last FF on an older windows xp operating system.

  my computer is running slow and after that I click on the search button to go to another site, it opens twice and takes a long time for one of the two pages to load. After that I actually enter a site when I click on a tab it charges once and it seems a little slow, however. I use the latest version of Firefox on a pc with windows xp as the operating system. Also, I installed IE, but I didn't do it in my default browser. I also use AVG security software if it has something to do with the fix. Any help is GREATLY appreciated

  Can you try a different mouse in case there is a problem with the mouse you are currently using?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost! The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost!

  The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  See below for my disk utility:

  

  

  Hello waynetay,

  Thank you for being part of the community of Apple!

  Looks like you want to recover the hard disk space that has been used by Bootcamp.  I know how critical disk hard space is, as I understand it want to access it.

  The Boot Camp Assistant should have added space on the side of Mac OS X from the hard drive when it has been used to remove Windows.  Since that didn't happen, you need to back up the system, and then erase the hard drive, then restore the backup.

  First, back up the computer.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Once you have the backup, you must erase the drive and then restore the backup Time Machine.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Once OS X installation is complete, you should have the option to restore from a backup Time Machine in the first installation of OS X.  Choose this option, and the computer will restore everything that was on it before it has been removed.  More information can be found here:

  How to reinstall OS X on your Mac

  Have a great day!

• Windows Explorer stops working after that I have to use Windows Update

  Currently, using Windows Vista Ultimate 64-bit service pack 1. After that I restarted the computer to finish the update/install Windows I can't use the functions from the Start button. Any attempt also runs programs through the Task Manager is met even uselessness. I gives me the error that Windows Explorer has stopped working and restarts. However, all program shortcuts that I have on the desktop can be used.

  The only way to solve the problem for me is to use the system restore to take me to a previous time when I didn't have the problem. However if I try to update by using windows update I experience the problem again.

  Im trying to download update is Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 64

  Finally, I'm sorry if I posted in the wrong forum, I don't know where to go. If posting in the wrong forum, I would appreciate a link to the right pair.

  -Josh

  Hi Josh, I had the same problem with Windows Explorer on a HP Vista Home Edition 64-bit computer, it would keep restart loop and stops also all the programs in the taskbar.

  I searched different forums and I tried different options, but nothing worked until someone said it might be a virus. I have Norton but it does not detect anything, so I tried Defender of Windows (that I had turned off because I had Norton) of Windows Defender found this startup program called mwau.exe to rest under C:\recycler\(random numbers...) but when I open the C: drive, I couldn't find anything manually, but there is no option to delete or disable it through Windows Defender.

  Then I Googled that name and found a software called free Antivirus "Malwarebytes anti-malware 1.41 ' recommended by CNET download.com, it's a small program, but I downloaded and ran, it found and removed this mwau.exe, I have not had problems with Windows Explorer after that, apparently mwau.exe means (I think) auto update for Microsoft Windows.» But after its removal, I have more problems. My updates of Windows runs as usual and I get new updates as usual, but this muau.exe was probably evil viruses do.

  Here is the download free link http://www.malwarebytes.org/mbam.php
  In addition, when you click on download the exe file name is mbam-setup

  Good luck. See you soon.

• my calendar has frozen after trying to move a clip in e-mail by using the calendar; still frozen after that force them to leave

  my calendar has frozen after trying to drag and drop a piece of mail to the calendar; still frozen after forcing them to leave... using OS X v 10.9.5

  Get the error that civilian could not be refreshed... requires a force quit and then when reopened, get the same message

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Why Firefox is not saving my log in info after that I used the option "Remember Me"?

  Why Firefox is not saving my log in info after that I used the option "Remember Me"?
  Whenever I get on a frequently used site where I have already indicated on the Firefox browser to save my log in info, I still need to manually connect. The latest versions of Firefox are not like that. I am running Firefox on both my Imac (OS 10.5.8) and on my Mac Book Pro (Snow Leopard), and on each machine, the latest version of Firefox does the same thing. I don't have this problem with Safari, but I prefer to use Firefox then please let me know if there is anything I can do to solve this problem.

  This has happened

  Each time Firefox opened

  Is two months ago

  If you register your name, and your password in the password manager and then having no other effect that Firefox can fill these name if necessary.
  Firefox is not automatically a session you.
  Many Web sites may use a cookie to remember you, you do not need to open a session.

  Websites to remember you and automatically log you are stored in a cookie that you must allow: Firefox > Preferences > privacy > Cookies: "Exceptions."
  Also make sure that you do not use the delete, search and download Firefox browsing history to erase "Cookies" and the "Site preferences" "browser history".

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.