EqualLogic Web Interface on a MAC

Similar Questions

• ACS Web Interface 5.1 does not

  We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional
  
      2 port NIC card. This produces 4 ports on the ACS server(G0 through G3).
  
  After initial setup of the ACS server with an IP address on G0, I connected a Windows 7
  
      server with IE8 to G0. The ACS web interface appears (after accepting certificate) and I
  
      entered some user accounts and NDGs.
  I then connected the ACS server to a configured port with port-security on our 6500
  
      switch. The port becomes err-disabled since the MAC address does not match up. It appears
  
      that the onboard NIC on the ACS server is bonded thus producing the MAC address issue.
  To fix this connection issue, on the ACS server, I cleared out G0 and setup G2 (additiional
  
      NIC card) with the IP address. After connecting to the 6500 switch, the ACS server port
  
      works fine.
  I removed the connection to the 6500 and connected the Windows server to the ACS.I can ping
  
      the ACS server but the web interface is now unavailable unlike before. I do not get a
  
      certificate warning on IE, it just states that internet not available.
  On ACS, the 'show' status of acs shows all the processes are running and initialized.
  Any help would be appreciated. It has got me stumped as all I did was change NIC configuration
  
      on the ACS server.
  Antonio
  
      

  I wanted to check if the failed to load web interface could also be due to something on the 6500 switch.

  So far:

  You have been able to see the Web interface with the ACS configured on G0 and directly connected to the PC Win 7.

  With the G0 set to ACS, you saw some MAC problem and so no web interface.

  With the ACS configured on G2, you can test the ACS server when it is directly connected and connected to the 6500, but in both cases do not display the web interface.

  So, it seems that you have two options:

  (1) seek to solve your problem of port security 6500.  (You have access to set up the port-security 6500?)

  (2) fix the G2 interface configuration.  If you do not see the web interface with the Win 7 PC directly connected then there is something wrong with the config on GBA.

• Would it be possible to have the 'Messages' app in the web interface for iCloud?

  I love writing my TEXT with my iMac or my Macbook.

  But when I'm at work, I'm working on a Windows PC.

  So I was wonderning if, one day, Apple could add this app to interface web iCloud.

  This year only, I used an Android phone, I did it with a third-party application (called MightyText).

  A small part has been installed on the phone and wrote messages on the web interface of MughtyText.

  Send your request for feedback:

  Return of goods - Apple

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• to convert applications PC Web site power on mac os.10.7

  to convert documents from PC Web site power on mac os.10.7. I often need to download my site of University conferences. I had no problem to do so on mac os 10.4.11 power pc applications.now with my new computer, I often struggle to do?

  What kind of documents are who?

  Do you mean presentations PowerPoint (PPS) files?

• Serial number on the web interface

  Is there a place on the web interface to find the serial number? I have more than 50 of the latest devices at remote sites that I have to manage and get an inventory without human intervention on the sites.

  Hi drumfreek,

  Sorry to say, but the serial number is found only on the physical device.

• GS752TP - Slow Web Interface

  Does anyone else have this problem? The web interface is so slow to become almost unusable. It loads the background then hangs just for a good 20-30 seconds. Sometimes, it loads the buttons... sometimes it is just with a white background. When I get to enter the interface by clicking on a button sometimes loads data... sometimes it is just there and I have to close the browser and start over? Someone at - it suggestions? It runs later (and also the initial firmware).

  -Eric

  I had this same problem for a while.

  As a "fix"------"Workaround"------"bodge" I used the Portable Firefox 3.5.6 put up-to-date of changes to VLAN\LAG settings.

  Really, it's not perfect, but works.

  /Pokes Netgear with a big pointy stick!

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• Web interface and communication series

  I just started reading on the user Web interface. It seems useful, but I could not, how do I connect an application user Web interface with some series/USB instrument, for example. Is it possible to have VISAS screws normals and other toolkits within the user Web interface? Or maybe, it would be possible to develop a stand-alone application using LabVIEW (and all the screw and tool boxes that I am used to), and then import into the user Web interface?

  Thank you

  Marcelo

  That's basically correct - LabVIEW code cannot be imported and you can not directly interface with hardware - and is the only authorized communication with web services (LabVIEW or otherwise).

  So if you have any material you want with the Web Interface Builder interface, you will need to build a web service of LabVIEW that outlined some of the features and then consuming the Builder UI with the functionality of the Web Service to import.

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support

• LaserJet 500 color MFP M575: Reset forgotten password admin on web interface

  Greetings.

  I forgot the administrative password to log on the web interface.

  How can I get it back?

  Thanks in advance.

  If the password is lost, then you must reset the unit. Start with the normal restore to default settings of the control panel option.  If it does not then seek the cold steps or reset NVRAM and reset at this level then.  If an item is not already circulating with the steps, then you will find them in the maintenance manual.

• LaserJet 4000: HP LaserJet 4000 web interface problems

  I have an HP LaserJet 4000 very old but still very functional.  When I try remotely inside through the web interface to change settings, the screen does not load correctly.

  It wants to load a JAVA runtime and I have the latest version of loaded oracle, but there must be an incompatibility.  I think that it only works with a very old runtime.  I have tried with different browsers such as firefox and chrome, but the result is much the same.

  Y at - it solution or a firmware update or something to fix this?

  You have the 600n jet direct card and the issues are known.  I think that windows 95 was the last os that could communicate and give you the web page.  You could try to download the latest firmware for your jet direct card and update its firmware using hp download managere, but to be honest I don't think it will work.  The saving grace is that you can make any changes you want in the control panel of the printer.  Just navigate the EIO menu on the printer and go through the menus.  A little more difficult, but it can be done.  Good luck.

• SRW2016 Web Interface after Firmware Update error

  I have a new SRW2016 and after updating from 1.2.1 to 1.2.2 firmware I get an error trying to connect.  I use Firefox with IETab and the error message is:

  ... An error has occurred.

  ... You want to debug?

  ... Line 11

  ... Error: "tBodies' is null or not an object

  I tried to use Internet Explorer, but the status bar displays "error on page".

  I * really * need help!  Any ideas?

  BTW, I got the update of the firmware twice.  The first time was

  minutes and finally he stopped (I don't remember if there was a mistake

  message).  The second update seemed ends without problems.

  TIA

  Well, I was about to do the update with hypertermial/xmodem, when I thought I should check the browser interface.  And now, it's working now (even if it's really slow).

  He had to because of my recent update to Firefox v2 to v3, as well as the updated IE Tab addon.

  I hope that the web interface used the HTML standards and not require IE. It's very frustrating.

• Problem with IP LRT224 web interface

  I have my LRT224 put in place about a week ago. It works very well for a while, but right now I can only access the web interface through the first LAN. If I use any other LAN and type the IP Address of the gateway on my browser as 10.6.21.1, the address bar will change to 'https://[::ffff:a06:1501]/' instead, and it displays the page Web is not available.

  I don't know in the parameter 'Port management'-> '802. 1 q"all my Device Management are enabled.

  Anyone know what's the problem?

  I found something, when enable https and IPV6, this problem occurs.

• WVC54GCA Missing WPA/WPA2 security in the web interface options

  I just had a WVC54GCA and discovered that there are some missing configuration options in wireless settings:

  On the web interface of cameras:

  Web interface > base: Wireless Settings > [modify security settings] > Security Mode:

  the drop-down list gives me two options: Disable WEP, but not WPA, WPA2.

  I've upgraded to the latest firmware (1.1.00 build 02), but the problem remains.

  Tried different browsers (Firefox 3.5, IE8) with the same result.

  Is this a bug in the firmware?  A defective unit? Anyone else having the same problem?

  Try to reset your IE browser settings and then try to connect to your camera configuration page and check if you are able to find that the options... If it is still impossible to find the WPA/WPA2 Option on your camera, press and hold the reset button for 60 seconds... Release the reset button... Unplug the power cable from your camera, wait 60 seconds and reconnect the power cable...

  Now check if you are able to find that the options... If still no so I think this could be the problem with the camera...  I think that you need to replace your camera.