Web interface and communication series

Similar Questions

• RDP Web Interface and connection broker proxies on the same port on 8 MR1

  Hello

  By reading the whats new document for version 8 MR1, I saw this:

  vWorkspace Secure Gateway role Consolidation

  All roles in Secure Gateway (RDP encryption, encryption of Internet access and Connection Broker encryption) can now be combined on the same server using the same IP address, port number and certificate server.

  .. which made me think that I might have RDP, web and broker any proxy if a gateway using port 443. This would be useful.

  However, in the secure gateway proxy configuration tool it has always down:

  NOTE: Either the Web Interface can be configured to the same address and the port that RDP proxy proxy or Broker for proxy connections.

  Am I misunderstand the information contained in the new document what, or if the text on the gateway configuration tool has not been updated? I share all of the 3 proxies on the same port?

  Scott.

  Scott, my apologies for the confusion. The text in the dialog box should be removed when the new feature has been added. It was an oversight that has not taken until after the product has been released. We intend to publish a fix that removes the misleading text when we release our next server important side fix.

  Marc

• Paralel loops and communication series

  Hello

  My current LabView project, I use the 'messages in queue manager' design patern. The program has Labview recover data from several devices connected to serial ports. For devices where I am for the most part, the convernd of their status in this way works as expected and good. The data in the response is passed to the rest of my program using notifications.

  However, I also have a testrack to where I need to send multiple commands (from different loops) and (in most cases) need answers from the testrack in the loop that passes the initial question.

  So now my question is: How can I check the answer in the loop of transmission being the other line 'not affected' (it's ok for me if they see the answer as long as the original transmission loop always get data). (L'espoir) to make it more clear, I have also attached a picture of the wat I would like to have)

  I hope you can help me.

  For each (serial, asynchronous,...) device write a State of the queue controlled MC who manage the device.

  The control file handle init, installation, recover data, get statusXY,..., free_device and outputs are named the queues for the stream (standard) and additional information (status).

  The data queue command group contains not only the order more parameters but also the name of the output of this command queue.

  Like this, the State of the MC device control each request for data (and may for example cancel or update a selfcal ask for a measurement...)

  (a good practice would be that data are only send existing, named queues )

• Web interface for updating Subvars

  Greetings,
  
  I am trying to build a Web interface where users (Admin) can go and update the Subvars and run the Calc and BR, required if necessary.
  
  Have someone at - it never built something similar to this?
  
  I intend to call "MXL" scripts from the web interface and pass the Variables by the web itself (server, App name, name of the BD, Subvar, the new value)
  
  and the Alias planning to call the relationship DB. And users can run the calc and BR, once they will update the Subvars on the web itself.
  
  Is - this sounds feasible design?
  
  Thank you.

  The problem that I see with this approach is it is given too large a group of people and the stage of changes to each other. For example, the user has changes in the month of Jan and the coup of a calc, but user B m at roughly the same Feb moment. Of course, given that the variable can have only one value, Feb WINS and the user has no idea that his calc does not work correctly.

• Switch P 52 SG500 - web interface shows the wrong model and disconnects randomly

  Ladies and gentlemen!

  One of our network switches is a SG500 switch 52p that recently started showing strange behavior.

  It started with the problem was not more accessible via its web interface. Even if it was running perfectly well access via a web browser finished in wait times.

  After resetting the factory default switch and configure its IP address access at first seemed to work but I had to know that the switch breaks out as a SG300 28 p switch on the administration Web site. In addition, random logoff occurs that send back me to the login page. Each from time to time, the model is correctly displayed after the login, but when I try to manage it I a connected again.

  It still works with an older version of the firmware (1.2.xx I think) but that shouldn't cause such behavior, it should? In any case, I can't update the firmware says the switch as a different model.

  Any suggestions what to do (apart from the RMA)?

  Respect,

  Hendryk

  Hello

  I'm sorry that you are having problems with the device and I'll try to give you the best possible advice in the circumstances.

  The first thing that comes to mind is that you connect to another device, the thought is the SG500. I did the experiment several times before, so I have a few suggestions to ensure we are connection to the device:

  1 - Download the Cisco FINDIT and scan tool you rnetwork, maybe you will find that you have two devices, the SG300 and the SG500. Here is the link:

  https://software.Cisco.com/download/release.html?mdfid=282833583&flowid=...

  2 - go to the switch that you believe to be the SG500, then go to Administration, and then discovered - CDP, and then click CDP neighbor information. Most likely, you will see that you have several switches, including the SG500.

  3. If you have followed suggestions and you still believe, you go to the right switch then call at the 866-606-1866 (of the United States) and we will be happy to help you control the device and replace it if this is the case.

  I really think that the first 2 suggestions will help you realize that you have two switches on your network.

  Please let us know what you find.

• VLAN and the SSID does not not in the Web Interface

  We have a couple of APs which do not show the VLAN and via the web interface of AP SSID.  If you go to the SSID Manager page in the web interface, the page rises but doesn't show any SSID configured.  It goes the same for Services - Vlan.  This page appears but does not show in any VLANS configured.  If you telnet to the APs, you see the mssid listed and all the SSID interfaces.  The SSID on the access point is functional and working.  It is just so hard to use the web interface for these APs.  I tried to compare configs running on APs where the web interface does not show this and APs that it shows, but cannot see any differences.

  Thank you.

  Have you tried with different browsers?

  Nicolas

• Install the HR schema and now I can not connect more hollow the web interface

  Hello
  
  I just ran hr_main.sql success. But now can't more hollow connect web interface of Oracle applications.
  I get this error: "Unable to authenticate the session."
  
  What has gone wrong?
  
  Thanks in advance.

  There is something right more important here. I guess that you are referring to the demo tables included with the database software. Do not these things on an Oracle Applications database.
  the hr_main.sql script removes and recreates a database schema called "HR".
  But Oracle Apps itself also contains a schema called HR that has nothing to do with the demo tables.
  So, when trying to install the demo tables, you destroyed a standard scheme of applications. This is almost certainly the cause of your problem.
  I'm guessing you also a lot of invalid objects now...

  Marc

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support

• Newbie question: can a LabView script or exe run on a Web server and interact with PHP?

  Hi all

  I am a complete newbie. I had to have an existing LabView project and have been asking if it can work with a PHP Web site. I would like to be able to create a form (for entry) on a Web page, and then go this LabView project entry existing. The existing LabView project then treats the input and generates a text file that the user wants to download from the site.

  So my question is, is it possible? If so, how to configure it and what products/costs might be involved?

  Thanks in advance

  A

  Hi Andy -.

  There are a few limitations "Remote panels" who probably will not do what you are trying to do as possible.  First, the remote panels have only runs on a Server Web of LabVIEW, and this server does not support PHP.  Integrate a web site that uses a web server with more features of LabVIEW is to put the server on a different port and then use an iFrame or something to integrate LabVIEW remote panel page into your own web site.  Communication back will probably have to use another protocol tansportation or to read and write files that they read and write.

  I highly recommend that you look in another function to LabVIEW, called "Web Services".  These are quite a bit different approach of the remote control and are available only on version 8.6 and later (and probably only editions of developers).  Services Web of LabVIEW allows you to perform a LabVIEW program (or modify an existing one) to connect back using XML.  It is a common place to consume and send commands to a Web Service of LabVIEW by using something like PHP or Flash.  However, you are responsible to provide interfacing features in the language that you use that consume the Web Service of LabVIEW.  For example, instead of a graphic on the front, you would need graphical data output and a PHP program that can do something with it.

  Web Services are quite handy if you need a 'light' client, as well as material interaction features of LabVIEW.

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• MMIC vs IPMI on B and C series UCS

  Hi guys,.

  any chance someone can explain the difference between CIMC and IPMI. A few pages on ORC are indicating that the CIMC applies on the C series, while other pages are mention it when we talk too many blades. Can I open a web browser and type in the IP address that will show me MMIC running on B200M2? It's looking like similar MMIC on C series?

  I found about UCS Manager CLI command that allows to disable IPMI and now I'm even more confused because some docs on ORC say MMIC is just an old name for BMC and I know that BMC is embedded CPU which takes care of IPMI feature...

  Kind regards

  Taenarum

  So the MMIC has had many names.

  WORKING IS BMC = MMIC. So if you see WORKING or BMC in all documents safely, you can replace it with CIMC. Also please bring that to our attention if you still see the WORKING or BMC in our documentation.

  The MMIC chip is the same on the B and the C series. The interface is a little different, but both provide the same functionality. On a stand-alone C series the MMIC provides much more information because there is no UCSM to show inventory, to alter the BIOS and to allow that do you other things.

  You can download the standalone KVM that will allow you to go directly to the KVM for a series B, but it will be different then the interface for the stand-alone version of the C-series. If a C series is integrated at the UCSM, he gets the B series interface.

  The MMIC access IPMI. So now a C series if you don't have the MMIC configured you can not perform IPMI on the server. CIMC is still active for series B but IPMI is selectable via the Service profile.

  Hope that answers the questions

  Louis

• Ability to create the ad hoc Conference of the web interface of MX300 or SX20?

  Account for remote testing.

  Assuming that everything is configured correctly, is it possible to invoke an ad hoc conference of the web interface of the CODEC.

  I can place and receive calls from the web page, place a call 2 and the first is pending.

  I don't see a way to conference together.

  What I have to be sitting at the touch-10 and press the 'Add' button to achieve this?

  As far as I KNOW, is not a way to "remote control", as the touchscreen as you can on an IP handset (series 79xx example using view phone or application of single wire)

  It is possible to do it via SSH, the codec CLI interface, see dial the xCommand starting from the pg 83.  I could not find a guide to the API for the MX300, but orders should be the same throughout all TC software codecs, if according to the codec and it's capabilities, some commands may be different.

  Codec-SX20-API-Reference-Guide-TC70

• Would it be possible to have the 'Messages' app in the web interface for iCloud?

  I love writing my TEXT with my iMac or my Macbook.

  But when I'm at work, I'm working on a Windows PC.

  So I was wonderning if, one day, Apple could add this app to interface web iCloud.

  This year only, I used an Android phone, I did it with a third-party application (called MightyText).

  A small part has been installed on the phone and wrote messages on the web interface of MughtyText.

  Send your request for feedback:

  Return of goods - Apple

• Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.