Equium A100: How to manage the battery and the AC adapter

Similar Questions

• How to fix stuck battery and automatic when restart updated ios 9.3.3

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  Lambung writes:

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  What do you mean battery stuck?

  the basic troubleshooting steps are: reboot, reset, restore from a backup or restore as a new.

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• ESXI how to install the network adapter driver

  Hi all:

  My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

  Thank you very much

  Hello

  Follow the VMware KB for the installation of the NIC driver, hope it helps.

  VMware KB: Cards not detected on a host ESX ESXi network

• How to manage the 'ok' and 'Cancel' dialog popup button?

  Hi all
  I use a dialog box with type = 'okCancel. My question is how to manage ok and Cancel button of the pop-up window. Here is my code below:
  < af:popup id = "kriterPopup" >
  < af:dialog title = "Kriter Seciniz' type = 'okCancel' inlineStyle = ' width: 500px; height: 400; "id ="d2 ".
  dialogListener = "#{BasvuruDegerlendirmeBean.kriterDialog}" >
  < af:selectManyCheckbox label = "" Kriterler: "id = 'smc2'"
  Binding = "#{BasvuruDegerlendirmeBean.kritersCheckbox}" >
  < af:forEach items = "#{BasvuruDegerlendirmeBean.kriterList}" var = "item" > "
  "< f: selectItem itemLabel =" #{item.ybKriter.tur} "ItemValueOptional =" #{item.ybKriter.tur} "id ="si3"/ >
  < / af:forEach >
  < / af:selectManyCheckbox >
  < / af:dialog >
  < / af:popup >
  
  I want to manage ok and Cancel button in this window and redirect the pages I want.
  Can someone help me how can I do?
  Thanks, my respects.
  Ali

  You need dialogListener...

      public void dialog1_dialogListener(DialogEvent dialogEvent) {
          if (dialogEvent.getOutcome().equals(DialogEvent.Outcome.yes)){ //for Yes
           ............
          }else{ //for Cancel
           ............
          }
      }
  

• How to manage the battery when the AC is plugged into Satellite?

  Hello

  I just purchased Toshiba laptop first and want to get the best of the life of the battery, like that on my last laptop is now fuck.

  My question is: if I have to run the laptop almost always from the power supply, is it possible or desirable actually remove the battery all together way to do not subject the battery to repeated loading and unloading cycles.

  Thanks in advance.

  Hello

  I also recommend to remove the battery from the laptop, if you use Notepad for most with the AC adapter.
  You should also 3 - 4 times charge and discharge the battery completely.
  This is necessary because the batteries maintain a memory effect.

  You said it s your first laptop from Toshiba. So I think you should take a look in the user manual that must be installed on the device.
  In my manual, I found several interesting information about the handling of the battery.
  So it could be interesting for you, too.

• How to manage the getter and setter in flex?

  I want to create getter and setter for a shared variable ways. How to create aid may be related?

  and how to call the accessor get and Set of a class of model?

  for ex:

  (1) in the IDMLEditor.mxml file

  [Bindable] public var currentDoc:IdmlDocument = null;

  private var _currentDoc:String;

  [Bindable]

  public function get currentDoc (): {IdmlDocument}

  return currentDoc;

  }

  public function set currentDoc (idmlDoc:IdmlDocument) {}

  this.currentDoc = idmlDoc;

  }

  (2) how to get from EditorModel.as?

  public class {EditorModel}

  [Bindable] public var currentDoc:IdmlDocument = null;

  You don't need to use underscore (_) to access the variable in the getter, setter class. You can immediately access the variable by using the name of the method

  myClass.currentDoc

  That's all

• How to manage the browser close event and session timeout

  Hello
  In fact, in my page ther is a table with records. If I select a record, it navigates to the next page and the status of the transaction will change
  'ONGOING'. Now, I want to change the status of the operation AGAIN if I close the browser or if the session expires. Please help me.

  Hello

  Words Anand is OK, if you want to access the new page, then you must keep the AM that will keep the data entered in the user interface in the cache of vo. There is no need to manage the State of the transaction.

  Kind regards
  Out Sharma

• Equium A100 how to remove BIOS password?

  Hi all

  Following a previous thread on failure of screen on my Equium A100,
  Any member does know how to remove the BIOS password on this computer.

  My problems with the black screen syndrome seem to start at the time asked me to put a BIOS password. I managed to get some information indicating "press ESC and start together and then press F1 '-it seemed to work once, but then I couldn't repeat the sequence, the computer just started directly in windows.

  Any ideas on how to remove the BIOS password. (I don't know the password!)

  Hello

  The BIOS password can be removed ONLY by a certified maintainer Toshiba in your country.
  It's the type of security that can be removed simply by authorized technician

  Therefore, get in touch with the local ASP to get rid of this password.

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Equium A100: How to increase WiFi range

  Hello

  I have an Equium A100 and wondering if I can increase the wi - fi range with any form of add the accessories?
  I have to balance my laptop on the windowsill of my apartment to pick up my more close to 'hot spot '.

  Any ideas?
  Thank you.
  Gus

  Hello

  You can increase the range of WLan and performance, but you will need a Wlan antenna.
  For example, like this [external Wireless USB Adapter | http://www.wirelessnetworkproducts.com/index.asp?PageAction=VIEWPROD&ProdID=1624]

  On [this page | http://www.wirelessnetworkproducts.com/index.asp?PageAction=Custom&ID=21] there are also a few tips and useful explanations on stronger WLan range:

  How about a litte film ;)
  Check the Youtube how to increase your Wi - Fi Signal. It s nice and sometimes incredible ;)
  http://www.YouTube.com/watch?v=LY8Wi7XRXCA