How to manage the battery when the AC is plugged into Satellite?
Hello
I just purchased Toshiba laptop first and want to get the best of the life of the battery, like that on my last laptop is now fuck.
My question is: if I have to run the laptop almost always from the power supply, is it possible or desirable actually remove the battery all together way to do not subject the battery to repeated loading and unloading cycles.
Thanks in advance.
Hello
I also recommend to remove the battery from the laptop, if you use Notepad for most with the AC adapter.
You should also 3 - 4 times charge and discharge the battery completely.
This is necessary because the batteries maintain a memory effect.
You said it s your first laptop from Toshiba. So I think you should take a look in the user manual that must be installed on the device.
In my manual, I found several interesting information about the handling of the battery.
So it could be interesting for you, too.
Tags: Toshiba
Similar Questions
-
Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:
Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.
Is the big question, where I want to especially a conclusive answer: How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).
On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?
According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.
I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.
-
I would like to know how to manage the ASN.1 encoding/decoding in LabView?
I would like to know how to manage the ASN.1 encoding/decoding in LabView? Hello J,
in the example given here , it looks like a format simple bytestream...
You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...
Encoding will work the same but in reverse
-
How to manage the tv after hdmi to hdmi connection
I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie
I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie
-
How to manage the SOAP response
Hello (beginner vCO),
I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response
[12:53:43.124 2014-05-09] [I] the settings...
[12:53:43.135 2014-05-09] [I] the available settings:
[12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >
< item >
< ServiceRequestID > SR138917 < / ServiceRequestID >
OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >
< ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >
< ServiceRequestCompleted > < / ServiceRequestCompleted >
MA138921 < CurrentActivity > < / CurrentActivity >
OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >
< ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >
< ActivityEndUTC > < / ActivityEndUTC >
< DurationTotalSeconds > < / DurationTotalSeconds >
< AverageDurationSeconds > < / AverageDurationSeconds >
< SecondsOffAverage > < / SecondsOffAverage >
< EstimatedCompletionUTC > < / EstimatedCompletionUTC >
< / OutputParameters >
< warning > < / warnings >
< exceptions > < / Exceptions >
< / response > '
It will be better to try and parse text or try and use another method with vCO
If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters. It is the action that generated the log you have placed in us. It generates an object Properties (key, value pairs) with the value for each setting that results.
In your case, assuming that 'outProps' is the result of the above, you can use:
var getRequestStatusResult = outProps.get ("GetRequestStatusResult");
And to analyze the code XML with E4X as Ilian said.
-
New to i Mac, how to make the photos to import into Photoshop default?
New to i Mac, how to make the photos to import into Photoshop default?
Hi Johnv,
Please visit the following link: How to Photoshop Your Default Image Editor in Mac OS X
Let me know if it helps.
Kind regards
Tanuj
-
all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?
If I shut down the computer and plug... he sees the thing then turned back...I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.any thoughts?Hi KK Waddell.
Thanks for posting in the Microsoft Community.
I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.
Before you start the troubleshooting steps, I need the information required.
1 did you changes to the computer?
2 did you receive an error message?
I suggest you to check with the other USB port.
I suggest you to see the links and check.
USB port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
One or more USB devices may not work when you start your Windows XP-based computer
http://support.Microsoft.com/?kbid=885624
See also:
Hardware devices do not work or are not detected in Windows
-
Im trying to use a new 4G Verbatim USB flash as RAM drive. The USB 2.0 flash drive, micro size so I can leave it plugged dedicated solely to that purpose. When I go to 'Properties' and I open the reading push tab I get "the device is plugged into an unsupported interface ' it is plugged into the USB 2.0 port I used before.» When I plug the USB in an another store bought (more long and 8 GB) I click on the Ready Boost tab and I get the options use as RAM. This one is too long to use.
Hello
You can view the information of the link.
Note: a flash drive may seem meet these requirements, but Windows Vista can still detect it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.
Hope the information is useful.
-
BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod
Hello
I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.
I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?
Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.
Thank you very much!
Hello
It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.
-
How to manage the runtime at the stage of PreUUT error when running in parallel mode
I would like to run Test DUT in parallel mode, and some actions are made in PreUUT of this kind of reading serial number and control of the aircraft.
The model of process don't goto PostUUT step when the runtime error occurs at the stage of PreUUT, so I would like to add a few things to check if error in the cleaning of the sequence and return to the configuration at PreUUT stage, but I think it's jumping all the actions of installation and the main stage?What should I do if I want to go back to run PreUUT again after the first run when the runtime error occurs?
Or, is it a good way to handle this kind of error withour restart of the program?
Bandaged,
There is no decent way to do this. The reason is the following: TestStand assumes that failure in the facility to a unique testsocket mechanism, it is senseless to proceed with this testsocket at all. It is recommended to manage the routines of judgment in this case using the SequenceFilePostStepRuntimeError callback. You also can use this callback to execute a loop on the step that creates the error until the error is resolved.
By default, TestStand does not support a tribute of the error but the proceedings concerning the execution of shots. You can just ignore the error (deletion of the error indicator) or you can implement your own features. For example, you can set a custom fault indicator which will be evaluated as a first step in your hand. If the flag is set, ignore you everything in your hand.
I know that this suggestion seems not to be a good idea because it's 'hack mack', but it solves your problem. TestStand, as already the State evaluates the execution errors that occur in the PreUUT as to the deficiencies of the system and carry out any checks is not suggested.
Norbert
-
How to manage the selection with the box in a table
Hello
JDev 11.1.2.4
I have a table with an attribute of EO/VO, transitional to manage the selection. This attribute is displayed as a check box. The user makes a selection by clicking on the checkbox. Then, the user clicks on a button that displays a pop-up window. Inside of this pop-up window, that user can create, insert, delete, or update values in a table based on an other EO/VO.
When the user clicks OK, the pop-up window is closed, then the data is committed.
When the user clicks Cancel, the popup is closed and the changed data are ignored. To remove the data, I call a Rollback. It works fine, but all the transitory values are lost which is correct because of the discount after the cancellation.
It's a problem because the user must be able to open the pop-up window several times with the same selection. This means that the restoration is not appropriate in this case.
How to ignore data edited inside the pop-up window and keep the selection?
Thank you
You can try to put the popup in his own taskflow and define a backup point before entering the taskflow. When the user cancel the editing restore you to previous backup. This should dispel the changes.
Or you save the selected rowkeys, call rollback and backward selection later.
Timo
-
How to get a popup when the device is plugged into the audio input jack?
Original title - card Audio HELP
I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.
Hello
This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.
Method 1:
As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.Enable auto-popup
a. press the Windows key + X, choose Control Panel, select hardware and audio.
b. scroll and select Realtek HD Audio Manager.
c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
d. click Activate dialog popup automatically when the unit is plugged in.
e. click OK twice.f. now, restart the computer and check the issue.
Method 2:
If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.(a) right click on the volume icon in the system tray and then click on "recording devices".
(b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".
(c) right click on the headset and then click on 'Activate'.
(d) (d) mettre put out the microphone, then choose "set as default device".
(e) click apply and Ok.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
How to manage the lines multiple region table OFA
Hi gurus,
I'm new to the development of new Pages of the OFA. Please help me how to manage multiple lines in the table region OAF.
My requirement I'm not able to manage multiple lines in my area of Table.
First row in my table area I am selected date_start and date_end when I select the end_date I need I need difference bet ween dates.
My problem is I am able to manage the first Table line but I am not able to manage the table still ranks when I fire that time I first get the rank only.
POS:
14/08/12 07:59:40 1
14/08/12 07:59:40 inside
14/08/12 07:59:40 date difference is 86400000
14/08/12 07:59:40 date difference is 1
14/08/12 07:59:40 date is less than 365
14/08/12 07:59:57 1
14/08/12 07:59:57 inside
14/08/12 07:59:57 date difference is 86400000
14/08/12 07:59:57 date difference is 1
14/08/12 07:59:57 date is less than 365
14/08/12 08:00:13 1
14/08/12-08:00:13 inside
14/08/12 08:00:13 date difference is 86400000
14/08/12 08:00:13 date difference is 1
14/08/12 08:00:13 date is less than 365
My custom logic:
If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "} DateDiff (pageContext, webBean); // Am = XxDutyTravelAMImpl // (XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean); OAViewObject = oaviewobject1 (OAViewObject) am.findViewObject ("XxDutyTravelDuDetEOVO1"); System.out.println("1"); If (oaviewobject1! = null) {} System.out.println ("Inside"); oaviewobject1. Reset(); New line added oaviewobject1. Next(); new line added Line OARow = (OARow) oaviewobject1.getCurrentRow (); Date sDate = (Date) row.getAttribute ("DutdetStartDate"); Date = eDate (Date) row.getAttribute ("DutdetEndDate"); java.util.Date VChangeDateTime = new java.util.Date (sDate.timestampValue () .getTime ()); If (sDate! = null & & eDate! = null) {} long m1 = sDate.timestampValue () .getTime (); long m2 = eDate.timestampValue () .getTime (); long diff = m2 - m1; System.out.println ("difference in date is" + diff); int diffDays = Math.round (diff / (24 * 60 * 60 * 1000)); System.out.println ("difference in date is" + diffDays); If {(diffDays > 365) System.out.println ("Date is greater than 365"); } else {} System.out.println ("Date is less than 365"); } } } } Kind regards
Srinivas
Hi Srini,
To get the event line descriptor that shot please use code below.
If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
DateDiff (pageContext, webBean);
Am = XxDutyTravelAMImpl
(XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow line = (OARow) am.findRowByRef (rowRef);Date sDate = (Date) row.getAttribute ("DutdetStartDate");
Date = eDate (Date) row.getAttribute ("DutdetEndDate");
java.util.Date VChangeDateTime =
new java.util.Date (sDate.timestampValue () .getTime ());If (sDate! = null & eDate! = null) {}
long m1 = sDate.timestampValue () .getTime ();
long m2 = eDate.timestampValue () .getTime ();long diff = m2 - m1;
System.out.println ("difference in date is" + diff);
int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
System.out.println ("difference in date is" + diffDays);
If {(diffDays > 365)
System.out.println ("Date is greater than 365");
} else {}
System.out.println ("Date is less than 365");
}
}
}Thank you
Vlaminck
-
How to manage the hierarchy in the list of key words
I have a few keywords that are nested two levels down, but when I click on and drag on the key word to move it to the top one or two levels in the hierarchy, it does not move. He's here. Of course, I know how to put a key word in a lower hierarchy but now I need to move some of them to a higher level, as you can do it in the Navigation pane on the left. Is there a place outside (LR) where I can go and manage the hierarchy?
Suppose you have two keywords, A > B > X and has > X and you want to merge all the A > B > X pics has > X and delete > B > X. To do this:
1. in the keyword list Panel, hover over A > B > X and click the arrow that appears to the right of the keywodr. This will exactly show photos that have A > B > X.
2 Select all these photos by Edit > select all.
3. in the Keywording Panel, in "Click here to add keywords", type "has > X» Now all the photos that had a > B > X will also have A > X.
4. in the keyword list Panel, right-click A > B > X and select Remove.
-
How to manage the pause embedded inside the CSV column line
Hello
I'm under pressure to make it work. I've already put this question on the forum of the APEX, but on reflection, I think that it relates more to PL/SQL rather than APEX APEX 4.1 having already utility to manage the Upload of CSV.
If you already read in the forum of the APEX, please ignore.
I'm sorry for that. Thanks for reading.
I need to develop an application that allows the user to upload a CSV file to a table of interface.
The APEX version on my workplace is 4.0.2.
I used the code of
http://dbswh.webhop.NET/HTMLDB/f?p=blog:read:0:article:11000346061523
It all works fine until recently I find
If a column in a CSV file cotain a break line (or line spacing) for example (the tester copy and paste this text which has a line break on a column in a spreadsheet)
It is the first sentence.
It is the second sentence.
It will break the 'it's the second sentence In a new column.
The contents of the CSV read next to Notepad as below
Date of assessment, Date, assessment provider, name of the assessor, Court, first name, middle name, last name, PRN person record, NHI number, assisted defendant Y/N number, is dependent on O/N, Notes, primary of ethnicity, "the ethnic origin other, please specify", gender, currently in treatment O/N, another Substance, Substance of concern 5 specified
22/09/2012, Co name of the provider, Warren Edgley, Wellington, sale, 2545554, dgsdf,, 'is the first sentence.
It's the second sentence. ', Japanese, woman, b.
This is the CSV UTIL code, please help me how can I replace the line break to a space so that the download process is correct.
In my applications, I save these lines in a table rather than a collection of APEX because the number of columns can contain greater than 50.CREATE OR REPLACE PACKAGE BODY "CSV_UTIL" AS --strip the beginning and the end quotes, then replace double quotation with single FUNCTION de_quote (p_str IN VARCHAR2, p_enc_by IN VARCHAR2) RETURN VARCHAR2 IS v_str VARCHAR2(32767) := p_str; BEGIN IF (p_enc_by IS NULL) THEN RETURN p_str; ELSE IF SUBSTR(p_str,-1) = p_enc_by THEN v_str := SUBSTR(p_str,1,LENGTH(p_str)-1); END IF; IF SUBSTR(p_str,1,1) = p_enc_by THEN v_str := SUBSTR(v_str,2); END IF; RETURN REPLACE (v_str, p_enc_by || p_enc_by, p_enc_by ); END IF; END de_quote; PROCEDURE parse (p_str IN VARCHAR2, p_enc_by IN VARCHAR2, p_sep IN VARCHAR2) IS l_n NUMBER DEFAULT 1; l_in_quote BOOLEAN DEFAULT FALSE; l_ch NCHAR (1); l_len NUMBER DEFAULT NVL (LENGTH (p_str), 0); BEGIN IF (l_len = 0) THEN RETURN; END IF; g_words := g_empty; g_words (1) := NULL; FOR i IN 1 .. l_len LOOP l_ch := SUBSTR (p_str, i, 1); IF (l_ch = p_enc_by) THEN l_in_quote := NOT l_in_quote; END IF; IF (l_ch = p_sep AND NOT l_in_quote) THEN l_n := l_n + 1; g_words (l_n) := NULL; ELSE g_words (l_n) := g_words (l_n) || l_ch; END IF; END LOOP; g_words (l_n) := de_quote (g_words (l_n), CHR(10)); g_words (l_n) := de_quote (g_words (l_n), CHR(13)); FOR i IN 1 .. l_n LOOP g_words (i) := de_quote (g_words (i), p_enc_by); END LOOP; END parse; /* Author: Oleg Lihvoinen Company: DbSWH Changes: 10.02.2011, There was a miscalculation of the file line last position in case it is the end of file */ PROCEDURE upload (p_file_name VARCHAR2, p_collection_name VARCHAR2, p_enc_by IN VARCHAR2, p_sep_by IN VARCHAR2, p_rows NUMBER) IS v_blob_data BLOB; v_clob_data CLOB; v_clob_len NUMBER; v_position NUMBER; v_char NCHAR (1); c_chunk_len NUMBER := 1; v_line VARCHAR2 (32767) := NULL; v_data_array vcarray; v_rows NUMBER := 0; n_seq NUMBER := 1; dest_offset NUMBER := 1; src_offset NUMBER := 1; amount INTEGER := DBMS_LOB.lobmaxsize; blob_csid NUMBER := DBMS_LOB.default_csid; lang_ctx INTEGER := DBMS_LOB.default_lang_ctx; warning INTEGER; l_sep VARCHAR2(100) := CASE WHEN p_sep_by = '\t' THEN chr(9) ELSE p_sep_by END; BEGIN htmldb_collection.create_or_truncate_collection (p_collection_name => p_collection_name); -- Read blob from wwv_flow_files SELECT blob_content INTO v_blob_data FROM wwv_flow_files WHERE NAME = p_file_name; v_position := 1; DBMS_LOB.createtemporary (lob_loc => v_clob_data, CACHE => TRUE, dur => DBMS_LOB.SESSION ); DBMS_LOB.converttoclob (v_clob_data, v_blob_data, amount, dest_offset, src_offset, blob_csid, lang_ctx, warning ); v_clob_len := DBMS_LOB.getlength (v_clob_data); IF v_clob_len = 0 THEN RETURN; END IF; WHILE (v_position <= v_clob_len + 1) LOOP v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position); v_line := v_line || v_char; v_position := v_position + c_chunk_len; -- When the whole line is retrieved and not end of file or end of file IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1 THEN parse (p_str => v_line, p_enc_by => p_enc_by, p_sep => l_sep); v_data_array := g_words; FOR i IN 1..g_words.count LOOP IF i <= 50 THEN v_data_array(i) := g_words(i); ELSE exit; END IF; END LOOP; FOR i IN g_words.count + 1..50 LOOP v_data_array(i) := null; END LOOP; v_rows := v_rows + 1; -- exit if uploaded specified number of rows IF p_rows IS NOT NULL AND v_rows > p_rows THEN EXIT; END IF; -- Store data to collection n_seq := htmldb_collection.add_member (p_collection_name => p_collection_name, p_c001 => v_data_array (1), p_c002 => v_data_array (2), p_c003 => v_data_array (3), p_c004 => v_data_array (4), p_c005 => v_data_array (5), p_c006 => v_data_array (6), p_c007 => v_data_array (7), p_c008 => v_data_array (8), p_c009 => v_data_array (9), p_c010 => v_data_array (10), p_c011 => v_data_array (11), p_c012 => v_data_array (12), p_c013 => v_data_array (13), p_c014 => v_data_array (14), p_c015 => v_data_array (15), p_c016 => v_data_array (16), p_c017 => v_data_array (17), p_c018 => v_data_array (18), p_c019 => v_data_array (19), p_c020 => v_data_array (20), p_c021 => v_data_array (21), p_c022 => v_data_array (22), p_c023 => v_data_array (23), p_c024 => v_data_array (24), p_c025 => v_data_array (25), p_c026 => v_data_array (26), p_c027 => v_data_array (27), p_c028 => v_data_array (28), p_c029 => v_data_array (29), p_c030 => v_data_array (30), p_c031 => v_data_array (31), p_c032 => v_data_array (32), p_c033 => v_data_array (33), p_c034 => v_data_array (34), p_c035 => v_data_array (35), p_c036 => v_data_array (36), p_c037 => v_data_array (37), p_c038 => v_data_array (38), p_c039 => v_data_array (39), p_c040 => v_data_array (40), p_c041 => v_data_array (41), p_c042 => v_data_array (42), p_c043 => v_data_array (43), p_c044 => v_data_array (44), p_c045 => v_data_array (45), p_c046 => v_data_array (46), p_c047 => v_data_array (47), p_c048 => v_data_array (48), p_c049 => v_data_array (49), p_c050 => v_data_array (50) ); -- Clear the line v_line := NULL; END IF; END LOOP; END; END;
I want to know how can replace these newline within a column to a space.
If anyone has any ideas, please let me know.
Thank you very much in advance.
Ann
Maybe you are looking for
-
The sort order of products under our categories on our website is random with Firefox, but the categories of products are in the correct order with IE, Chrome, etc.. This incorrect order occurs on different computers, e.g. Firefox, Windows 7, XP, etc
-
I accidentally uninstalled my Sound Blaster. Is there a way to reverse uninstall?
I accidentally uninstalled my Sound Blaster, sound is now gone. Is there a way to reverse uninstall? I buy? Where?
-
Regardless of the type of file, I attached DOC PDF TIF I get the error DATA IS INVALID. Fax works because I can send a letter of motivation, but NOT attachments.
-
consolidation of the media in the hearing?
HelloI have a big project of hearing (actually consisting of multiple multitrack sessions), and I need to move some of the multitrack sessions to a laptop to take with me drive. The original sound of the source of these sessions is archived on a disc
-
How to stop the evented of e/s for the vb javascript error message
Since the installation of Adobe CC, I get an error continually when one of the CC apps is open. Of course, quite boring.[Window title]Evented i/o V8 JavaScript[Main instruction]Evented i/o for V8 JavaScript stopped working[Content]Windows is checkin