Equium A200-1VO - slow start with the Vista patch

Similar Questions

• Equium A200 BIOS update start with an error

  I am trying to update Bios on my Equium A200, once downloaded and started to install the error say rom of good size file box.

  Can anyone help?

  I'm using Vista Home premium.

  Hello!

  Before update you the BIOS, you should extract all the files from the .zip file, otherwise, you get the same error as you.

  So, first extract all of the files and try the update of the BIOS.

  Bye!

• Equium A200-1V0 - need help with the installation of the recovery system

  I WANT TO DO A FACTORY RESTORE, BUT CAN NOT FIND MY DISK AND WHEN I PRESS ON 0 AT START UP IT ME GIVES THE OPPORTUNITY TO RESTORE BUT ONLY WITH THE DRIVE AND I CAN FIND THE PROGRAM ON THE LAPTOP TO CREATE ANOTHER DISC! ANY HELP ON HOW I CAN RESTORE THE LAPTOP WOULD BE GREAT

  Thank you!

  If I m well to remember this old book was offered with Vista and recovery image was recorded on the second partition of HARD drive in the folder called HDDRecovery.
  This file is always available?
  Original recovery disk can be created if the laptop to factory settings, pre-installed Toshiba disk creator tool and recovery recovery image stored on the HARD disk.

  Of course, I don't know what it looks like with all this, but you can try to find this Toshiba tool and check if the creation of recovery disks is possible. If this isn't the case, then you have a problem.

  In General original recovery disk can be ordered on https://backupmedia.toshiba.eu/landing.aspx but I don't know if you can order it for this older model laptop. Check it out.

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• Initialize the trouble on Equium A200-1VO

  I have an Equium A200 - 1VO, starts in Windows Vista and works ok until I connect the power cable and then it freezes and won't do anything. Also if it's on the socket to switch on it will do nothing, nothing comes on the screen.

  Can anyone help please?

  Hmm, sounds like a hardware problem.

  Maybe it's just a problem of AC adapter that provides an abnormal power to the laptop. Then you should try to plug another compatible adapter for the laptop just to check if this is the case otherwise, it could be a motherboard related problem and it would be the worst case buddy in this case, you have to replace the motherboard and it is a very costly affair

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• Equium A200-1VO isue - white screen start new

  I got a new laptop Equium A200-1VO Friday as a Christmas present very very end and last night (Monday), I played football coach, play with ITunes and deleting files on an old mp3 player. Everything was fine when all of a sudden there was this click / the sound muffled and the screen went black.

  The laptop is connected to the time and so connected them to clear a/c was, so was the power and charge light, but he just stayed empty.

  I then unplugged the charger and it appeared with the orange light mean low battery. I then removed the computer game disc thinking that it is possible that and turned off the phone manually. Now if I just push the power button it stands theres a click, just about where is the hard drive and it stops, if I hold it in theres a click, but it stays on, all the time the screen remains blank.

  I then turned off and it rebooted I was wondering if it was just low on battery and still nothing.
  I left the place cell phone off during the night but in the morning, the problems are still there. I even blocked the "product recovery" disk, but still no sign of life.

  I'll try to plug this moniter screen and see if this is the problem then he hopes to be able to tell you soon. Oh, one thing I can think is that I used it on my bed, is there a way it could have overheated? If Yes, then would not be leaving off all night helped / solved this problem?

  Thanks in advance!

  Have you tried to remove the battery and disconnect the AC for a while?
  I would recommend doing this!

  Remove the battery and the power adapter for about 20-30 min. After this short period of time to connect all the parts again and try to start Notepad.

  Maybe it helps

• Equium A200-1VO - "a disk read error has occurred."

  Hello

  I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

  However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

  "A disk read error has occurred.

  Please press Ctrl + Alt + Delete to restart»

  I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

  I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

  If anyone has any suggestions I would be very appreciate.

  Thank you very much

  Mark

  Equium A200-1VO
  -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

  Hello

  In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

  Maybe something was tangled up in your Windows installation. About reinstalling Windows?

  You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
  However, if you use an external HARD drive box you can save it on another computer.

  Good luck! :)

• How to install Windows 2000 on Equium A200-1VO?

  Hello

  Can someone help me?

  I would like to install Windows 2000 on the Toshiba Equium A200-1VO laptop, but I need the drivers to do this.
  I have tried the Toshiba web page but cannot find the drivers.

  Can someone please?

  Thank you

  You will not be the drivers because this Vista designed for laptop is not supported by this old operating system. Maybe you can find the drivers for Windows XP Home edition, but not for W2000.

  All you can do is search for the drivers on the net and hope you have success with it.
  I don't know why you would do this, but perhaps you should accept that at some point Toshiba must say stop and don't waste time with the support of the older operating system. I also believe that 0.01% people want to use this old operating system on new generation laptops.

  There is no sense to make support for W2000. What do you think about this?

• Equium A200-1VO - detects Ethernet cable not

  Hello

  I have an Equium A200-1VO. It is equipped with a fast Marvell Yukon Ethernet controller.

  When I plug the cable to connect to the internet, nothing happens. It says network cable is unplugged and no light no flash where the cable plugs. It is configured to automatically detect the internet settings (Vista) and the pilot is the last and the work. I also uninstalled the driver and rebooted to reinstall.
  Any ideas what could be wrong... is the broken card? If so where can I get a new one (uk).

  Hello

  Have you checked the Device Manager?
  Are you sure network adapter is not disabled it?

• Re: Equium A200-1VO - maximum RAM capacity

  I have an Equium A200-1VO with 2 GB of memory.

  What is the maximum amount of memory that I can install?

  I checked the Web from Toshiba for the Equium A200-1VO site and it can be upgraded to 2 GB of RAM.
  Therefore, you must RAM DDR2 667 MHz.

  So in your case, it s an upgrade is not necessary, because you have already 2 GB installed.

• Re: Equium A200-1VO hard drive upgrade

  Hello there, I am hoping that there is someone out there who could give me a little advice!

  I have a laptop Equium A200-1VO, but unfortunately I need to replace the hard drive. He currently holds a 120 GB drive, but I wonder if the laptop could face if I replaced it with a capacity of 500 GB? Otherwise, 350GB?

  I hope you can help!

  Sincere greetings,

  Rich

  I agree with Akuma. Satellite A200 can manage with drives of 250 GB and more.

• Equium A200-1VO: unable to connect to Wi - Fi

  Hello

  I recently bought the SATELLITE A200-1VO laptop and for the last day I tried to configure it to connect to a wireless network. The wireless network has been implemented and my laptop it can detect, but when the connection to him, it shows the message "Windows cannot connect to the"network name" There then two options, we need to return to the list of available networks, and the other is to diagnose the problem, which does not help as much as it advises on things such as the positioning of the router and e.t.c.

  Here is a description of what I'm trying to configure:

  -J' use a Netgear DG834 ADSL router modem which is connected to my PC via an Ethernet connection.
  -Using the PC I set up a wireless connection with WPA2 security and the SSIS set to broadcast.
  -J' then activated functions wireless on my laptop and it detects the SSID, shows the strength of the network and attempts to connect but fails.

  Here's what I tried to solve this problem:

  -Re-installing the wireless connection - it did not work
  -Plugged the router to the laptop to check if the router was defective - the router worked fine so it was ok
  -Reset the router settings - did not work
  -Take the laptop next to the router - signal became much stronger, but still has not connected
  -Move the top - did not work
  -J' tried assigning the IP "192.168.0.1" for the network connection - did not work

  I called Netgear tech support and this is what they suggest:

  -The usual things like updating the list network, restarting the pc and e.t.c - obviously did not work!
  -Assigned intellectual property - "192.168.0.1" for the router and a subnet mask of "192.168.0.10", restart the laptop and try again - it did not work
  -Various things such as changing he SSID, security settings and access but no luck
  -Finally, we tried upgrading the firmware on the router later and it works no more.

  Support staff informed me that the router is working properly and there are a few settings on the portable computer that prevents the connection, unfortunately, she didn't know what it was. Before you contact Netgear support, I thought it was the case that I remember a client to work with the same problem and it was corrected by manually configuring a new connection - I've tried this but found it trying to connect previously configured connections so the same problem occurred.

  My laptop is running Vista Home Premium 32-bit.

  Everyone knows about similar problems or know how to fix? Any help will be much appreciated because it is now very frustrating!

  Thanks in advance

  I think you should go back to the basics.
  You must remove all security settings (Wlan encryption, Mac address filtering, firewall, etc.) on the WLan router and then you test the WiFi connection.

  If this is not possible a few wrong settings wifi Vista prevent the laptop connection.

  I found this useful page of MS on Windows Vista: networking
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  You will find FAQS and how to s

  By the way; Perhaps this TSB Toshiba could help you too.
  http://support.toshiba-tro.de/KB0/TSB7101OC0007R01.htm

  With regard to the BES

• Equium A200-1VO - screen not working no-lines out of feint

  Equium A200-1VO.
  Just got this about 2 months ago and only used it twice and the screen no longer works!
  It looks like its covered in lines of feint. From what I can do on the computer seems to be running ok.

  Any ideas?

  Have you tested the display to the external monitor?

  It might help to know if it s a graphics card or a matter of FL-inverter DC-AC/display.
  If the image appears correctly on the screen so I guess one of the FL-ups parties or internal TFT display of defects and must be replaced.

  But a question;
  Have you tried to update the display driver and BIOS? Check it!

• Can not burn blank CD on Equium A200-1VO - unknown error occurred (2131)

  Hi all

  I have never been able to burn a blank CD using the rewritable CD drive on my Equium A200 1VO.
  I am using TDK CD - R80 700 MB ', 'up to 52 x speed"blank CD

  This is the error I get when I try to burn a disc in iTunes:
  The attempt to burn a disc failed. An unknown error occurred (2131).

  Any suggestions?

  Mike.

  Hello

  AFAIK this peacekeepers of error message by using the CD - R disc.
  Check if you can burn the CD - RW? On my laptop I can burn files on CD - RW iTunes correctly.

  By the way:
  If your laptop has the reader of the TS-L632 CD/DVD then you need to update the firmware as suggested here in this article from Toshiba

  [Unable to burn songs on iTunes to some CD media. An unknown error occurred (2131)"is displayed. http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2024 958xml & sliceId = & dialogid = 56438599 & stateId = 0% 200% 20 54771650]

  Concerning