Equium A200-CD/DVD-RW does not

Similar Questions

• Equium A100 - CD/DVD drive does not

  I tried to use the CD drive on the A-100 and it seems not to work - it spins the disc, and the yellow light - however, you can not explore to load the disc or its contents.

  I thought this might be an OS problem, so I tried with a boot disk - a bootable cd Knoppix I have used before, and it refuses to load this either (Yes, the boot order is modified to be the first CD)... it's just a black screen the blinks _ for a little while, he left no doubt and then it starts to boot from the HARD drive.

  It is a fairly portable new - a few months only and to my knowledge the CD from the drive has had very little use - 1-2 may be installed.

  Any ideas?

  Hello

  This very strange art.
  For me, your description looks like a hardware malfunction, but I just can't believe this could happen after using the player twice.

  You said you tried to use the Knoppix CD. What about the Toshiba Recovery CD?
  Is it possible to play the CD?

  In my operational experience, not all means are compatible! It is possible that the drive could not read or write other unsupported CD or DVD.

  So what to say in the user manual, you should find a compatible with CD/DVD index and supported.
  This CD and DVD should work for sure.

  CD/DVD manufacturers mentioned are unknown to most people, but these are ONLY the manufacturers and not sellers as IE TDK.
  Primarily a manufacturer of CD/DVD provides support for several vendors!

  So finally I recommend that you check the CD taken in charge and if she will not run contact the ASP for assistance. Maybe the drive needs to be replaced.

  Good luck

• Equium A200 - CD/DVD drive is not detected

  I can't open any CD/DVD disc. The drive is not detected.
  When checked in the management system, he demonstrated, the drivers are missing or corrupted.

  How do I download the drivers? Or is there another solution?
  My model number is PSAF5E
  Serial number is YT144538Q
  And the CD/DVD device is POLE * DVD / RAM UJ-850 s ATA device

  Hello!

  T, you can download or reinstall the CD/DVD driver because it s a part of the OS (operating system).

  It would be interesting if the BIOS can detect the drive. Please check this box.

  It would also be interesting if you have an error as the #19 error message. This is known and a search around the forum.

  Good bye

• Equium A200-1AC - Hotkey Utility does not work on the Windows XP Home edition platform

  Why fail HOTKEYS Utility 0.49.2.1C on Windows XP platform?
  Please help me!

  Hello

  already tried this address:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  If so, then try the Canadian site, they sometimes pilots who aren´t on the European site:

  http://209.167.114.38/support/download/ln_byModel.asp

  Otherwise give some feedback so that we can find another solution...

  See you soon

• Equium P200D PSPBNE: Device Manager does not display the DVD - RW DVR-K17A ATA DVD / CD

  Hello experts out there I need urgent help!

  My Equium P200D all of a sudden she decided to show the CD/DVD drive in device as Manager no longer works due to a corrupted driver?

  I am running Vista Home and despite the removal of the drive and trying to update the driver, nothing seems to work can anyone help, I came to a point of throwing out the window.

  Concerning
  Stephen

  Hi dude

  This problem is known to me it happened to me also
  The problem is that you register Windows!

  A registry entry is corrupted and this is why the CD/DVD-ROM does not like I should.

  So what to do.
  First remove the driver from the Device Manager. Simply remove it.
  Then access the registry and and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

  Check it out

• Satellite A200 - 23P - mechanic of DVD - rom does not

  I'm sorry for my English in advance this topic! -Thank you

  I have a very big problem with my engraver of DVD (RM).
  I bought SAT A200 - 23P three weeks ago.
  The Win VISTA operating system has been installed. DVD - rom worked well.

  If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

  Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
  It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

  However, if I have installed XP on the second partition, Win Vista does not load :(
  I don't have a second chance for second selection (Vista and XP).
  I now have XP only, even if Vista is on the first partition - I didn't delete it.

  Do you think that the DVD-rom is HW or SW problem?
  I think that, given that the DVD-rom does not in the BIOS - HW error.

  But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

  If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

  PLS help me someone-

  Thank you!

  Hi Michal

  Your question is very strange, I mean the number of CD/DVD drive

  The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

  So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

  My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

  As you see it s not easy to say what's wrong exactly, we can only speculate.

  Now some details about your installation of OS double.

  You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
  This happened to me also. I installed Win XP on my Satellite and could not start Vista.

  The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

  Then I downloaded the tool called Easy BCD.
  This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

  That s it!

• Satellite A200 - 19L: no sound after hibernation & CD/DVD drive does not work

  First of all, my laptop computer became very slow loading vista after formula 1 week to buy it.

  Second, sometimes when I put the mode 'sleep' a revival of the laptop, there is no sound and a red circle appears over the speaker icon in the bar of tasks, and when I go into control panel > Sound, he tells me that no. his drive was installed and when restarting the laptop the problem resolved?

  Thirdly, after the formula of the week 3 buy the computer also dvd - cd player has the same problem, like the sound and when you open my computer that NO cd\dvd drive icon and when I put a cd or dvd, it does not work or run and it happens all the time, even if the laptop restarts.

  Since then im able to watch movies or work.

  I'm lost and I don't know what to do!
  (Sorry for my bad English, but I hope you understand the problems)

  Hey Osama

  I think I can help you. The questions that appear on your laptop are not serious and the only one associated with software or registry.

  Regarding your noise problem:
  Please check this Microsoft document
  http://support.Microsoft.com/kb/929685/en-us
  or
  http://support.Microsoft.com/kb/937077/

  the MS update must be downloaded and installed ;)

  Regarding the missing CD/DVD drive;
  I think you should try to remove the drive from Device Manager and reboot the laptop. Then the operating system should recognize the STRANGE again.
  Secondly you should access the registry editor and should remove the upper filter and bring back the key filter
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Recommend checking out:
  http://support.Microsoft.com/kb/270008/en-us

  best regards and I hope that I can help you

• Satellite A200 - DVD player does not open

  Hello

  I had no computer laptop withmy problems so far and my DVD/CD does not open. I'm not savvy in same computer so bear with me! There is no lights there at the moment and when I turn on the laptop it does not sound like he used to. I looked on other forums and tried things like access to the Device Manager, but it says that it is on it - any other suggestions would be welcome.

  Oh, and I get no error message and in Device Manager its says that "the device works correctly.

  See you soon

  Hello

  You can try to open the CD/DVD drive using something small and thin. Near the eject button, you should find a small hole.
  You have to slide - in the little thing and should manually open the CD/DVD drive.

  Then try to insert a CD or DVD disc and close the CD/DVD drive.
  Check if the drive can read data from the disc.

  I would recommend also check if the CD/DVD drive would eject the disc by pressing eject button check different opportunities.

  Welcome them

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• On Qosmio G20 DVD player does not work

  On my laptop dvd player does not work perfectly.
  I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

  This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

  Help, please

  Thank you

  Hello

  There are two possible reasons why you are not able to copy anything to the CD or DVD.

  First, it may be possible that the drives used are not entirely compatible.
  In such cases, it s always advisable to test different CD and DVD from different manufacturers.

  Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
  This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.

• Satellite A500 and Win8 - DVD player does not work

  I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

  Anyone know how I can get it working again.
  Thank you.
  Cumbria

  Solution here:
  http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

  * Uninstall Toshiba programs: *.
  • TOSHIBA Recovery Media Creator
  • TOSHIBA Disc Creator
  Then restart your PC using the power--> reboot option in Windows 8.
  Your CD/DVD should be available now.
  To help uninstall these programs, follow the instructions below

  * To uninstall a program or application: *.
  1. on the home screen, type Control Panel
  2. select Programs--> uninstall a program
  3. find two programs listed above and uninstall these applications
  4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
  5. when the power to the computer on the CD/DVD drive should be available
  If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

  * To uninstall a device driver: *.
  1. on the home screen, type Device Manager
  2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
  3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
  4. the CD/DVD drive should now be shown.

• dvd player does not

  My HP pavilion 14-n014nr dvd player does not work.  Tried a driver fix earlier and it still does not. Any help on this would be greatly appreciated. The sooner, the better.

  This is the 64-bit version of Windows 8.1 if it matters.

  Hello

  In this case, runs through the procedure in respect of the resolution subtopic - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that fixes the problem.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Re: CD/DVD drive does not seem to start the DVD in Satellite P750

  My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.

  Anyone?

  Help, please.
  Thank you!

  Have you tried to change AutoPlay settings?
  Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games.

• Satellite Pro A30: CD/DVD drive does not-how to restore the OS?

  I want to run the recovery discs to restore my laptop to its original state, but the cd/dvd-rom does not work.

  Does anyone have an idea how I can do this is by plugging my laptop on another pc or is there a program on the web, I get to do this for me.

  Bacically, even after that run CCleaner and other programs of the laptop is still slow and struggled.

  Hi mate

  I'm not very well if the former satellite Pro A30 is able to boot from USB drive Mr. in this case, you can try to install the OS from USB flash stick.

  Here's an interesting ad on this theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63986

• Equium L300 - 17Q - "Enter" button does not

  As read you on the title my TOSHIBA EQUIUM L300 - 17Q enter button does not.

  screen-on the built-in keyboard works is that all the other keys work.
  I have reinstalled the keyboard from the device manager driver, then perform full system recovery and still does not.

  Hello

  It looks like a malfunction of the simple keyboard in this case, you will need to replace the internal keyboard. Otherwise, you can use the USB keyboard