Equium A200 (PSAE2) - WXP Pro and BIOS update

Similar Questions

• Equium A200 to WXP Pro and BIOS update (PSAE2)

  OK, I have XP Pro instead of Vista which is optimal. Works fine but BIOS is outdated, and the last time I tried to update it went wrong and I had to have a new Board of Directors implemented.

  I know that I'm not the only one who had this problem, is there a solution?

  And update the BIOS, you try to use? Please post more information. What version, what happens exactly?

• Newbie on Equium A200 (PSAE2) question

  I recently bought the laptop A200-15i (Equium A200 (PSAE2)). Everything works fine, but I noticed that I was not provided with a master restore disk. I don't see any facility for the creation of a non more. The list of packages informs me that I should have received two disks. Which is the Windows Vista Anytime disk pro and the master disc. Can someone please inform here.

  Second, the model above has two disks or the only drive partitioned into two.

  Thank you for your patience and your help.

  Just go back to the shop to have you brought your laptop and get the disc

• I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page.

  I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page. I have sp2, what don't get me?

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 07:51 on Wednesday, August 15, 2012

• Configuration at the request of update Retriever to download only the drivers and BIOS update?

  I'm looking to automate the update of extractor and our organization doesn't want or need additional software such as SHAREit or WRITEit, just the drivers and BIOS update. Is it possible to retrieve only the BIOS and the driver for the repository updates?

  Thank you

  At one point AHA a little there, discovered that I can mark the drivers/software I want installed as test or hidden mode and ThinInstaller don't provide that updates available, which works very well for us.

  Thank you

• Equium M40x-189 and BIOS update

  There are updates of bios for my laptop, and so I thought I would try a flash update. I can only find the Trad version and not the flash version of Win.
  the problem is that the traditional flash update file asks you to create a bootable cd for the update procedure. Software CD, Toshiba in their wisdom have provided a cutting of the version of "save now". Guess what this special version of toshiba cannot create a bootable cd you have to spend £25 for the full version.
  Someone knows, there is a version of the flash upgrade Win

  Hello Andy

  As far as I know just BIOS updates listed on the download from Toshiba site are available. I guess that your unit is a relatively new. If you have any problems with this device do not do any BIOS update. Only if there is a problem the update of the BIOS by using external devices or something like that is recommended.

  Good bye

• Satellite Pro M30 Bios Update

  Hello

  I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.

  Should I take 1.6?

  Any help?

  Thank you

  Hello

  It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.

  In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!

  Here is the link: http://eu.computers.toshiba-europe.com
  go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!

  Bye Bob

• Equium A200 (PSAE2) am I maxed out here on the memory?

  I was not here for a while especially because my Toshiba Satellite A200 (PSAE2) gave me a perfect working service. Now, I want to upgrade memory because she seems to be the right thing to do in the hungry world memory today. SO currently I have 2GB on board and I can see info on the site here I'm maxed out. I can not install more RAM!

  So how is. Is this a limitation of the BIOS or what? Why can I not install 3 or 4 GB... or can I?

  Thanks in advance for your help and your time

  Hello and welcome back ;)

  Can you please send the name of the exact model of your Toshiba laptop (A200-xxx)?

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Satellite Pro P100: Bios Update went wrong - what to do?

  Hello
  I have a satellite pro p100 with win xp.
  I downloaded the bios-update victory.
  something is worng. the laptop was closed and when I try to start it,
  I blackscreen, do not see anything, windows does not start.
  nothing happens.

  Please help me, I write my degree and really need to resolve this problem quickly.
  thanx

  Hello

  so if your machine does not start then you need to send/bring your machine to the next partner service authorized in your country.

  Here´s a link to find one and I suggest you to contact one of them immediately because of your degree:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  Good bye

• Satellite PRO A300 BIOS update process: TEMPRO asks to update again

  Hi, I'm using Toshiba Satellite Pro A300 with Windows Vista Home Premium.
  Downloaded and run the BIOS update. The installer said that everything was OK with the BIOS flashing.
  But when the computer reboots, TEMPRO asking again the BIOS update.

  I don't know if the BIOS has been or has not been updated.
  How can I handle this:

  TKS

  Samuel a. Mello

  Hello!

  If you are running the Toshiba HWSetup you can see what version of BIOS you have.

  On the Toshiba site, you can check if you have the latest BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  On this page you can also find a new version TEMPRO.

  Good bye

• Equium A200-15i - need the original BIOS

  I would be very grateful if you could send me a link to the original bios for the EQUIUM A200-15i.

  Thanks in advance, Michael

  Hello

  On the European driver Toshiba page, you will always find new versions of BIOS.
  Older versions of BIOS are not downloadable, and I think that you will need to contact the ASP in your County to get this older BIOS.

  Concerning

• Satellite Pro L40: Bios update not necessary - no settings for RAM in Bios 1.90

  Hi, I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  If I look at the ram using a tool of information system (cpuz or aida320), it shows she doesn't move at the speed of 667 mhz but at 533 mhz.

  As you can see from this screenshot the memory runs at the real speed is less than the maximum that the sticks have a rated power.

  http://img135.imageshack.us/img135/4580/cpuz1pj5.jpg

  Its running at 266 mhz (533 mhz ddr) where it should be run at 333 mhz (667 mhz ddr).

  I also noticed that with this laptop fan never seems to come, is it possible to mount the fan?
  Whenever I have the laptop for more than 30 minutes, it becomes very hot.

  Hello

  > if I look at the ram using a tool of information system (cpuz or aida320) it shows that it does not run at the speed of 667 mhz but at 533 mhz.

  What is your FSB?
  If the laptop was equipped with memory PC2-5300 modules then they could run at 667 MHz, but only if the FSB would supports 667 MHz! I think is supported by the FSB of 533 Mhz.
  So I can't say it s nothing wrong!

  > I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  Why do you think a BIOS update would turn the memory settings in the BIOS?
  Please don t mix of desktop computers laptops! Laptops cannot be overclocked.
  BIOS of laptop computers is not the same thing as a desktop PC BIOS!

  > I also noticed that with this computer laptop fan never seems to come, is there a way to turn the fan to the top? Whenever I have the laptop for more than 30 minutes, it becomes very hot.
  Have you noticed all automatically turn off downs or any other strange behaviors laptop as freezing OS for example?
  If it is then that the laptop runs correctly and doesn't overheat.
  Books to support thermal protection which would be closed the laptop automatically to avoid equipment damage

  Then lean back man and enjoy your nice toy ;)

  PS: you are fan of Carlos Santana? ;) I ask through your nickname ;)

• Portege Z810 and BIOS update 1.80

  What the BIOS for Portege Z830 update (PT224 / PT225 / PT22L), version 1.80 do?

  The description says fair + "This BIOS update adds functionality to your system." +, and I couldn't find anything about this website more Toshiba on. The update has been published on 24-05 - 2013.

  I assume that Z810 Portege European must be like us Z830/Z835 (PT224x/PT225x) so I ve checked the page American support for the update of the BIOS and here's the info on the BIOS updates:

  + Version 1.80 - 2013-04-25 +.
  + Optimized a BIOS setting to improve the reliability of hibernation RESUME. +

  + Version 1.70 - 2012-09-12 +.
  + Implemented the Intel specification for stability - put MEBX up-to-date at 7.0.0.0063. +.
  + V1.30 EC/KBC: ensures better stability. +
  + V1.30 EC/KBC: changed the method of detection of power supply error. +

  + Version 1.50 - 2012-02-13 +.
  + Add a boot LOGO sequence for ZAT (GPS) models. +
  + Improved: Control of the TPM on Intel TXT module enabled systems. +
  + Implemented a fix for a problem where the BIOS password can be entered when it is configured as follows: 1. wired USB keyboard is connected to the port replicator. Wireless USB mouse is connected to a USB port on the computer. 3. computer is docked in the duplicator. +
  + Implemented a fix for a problem where the BIOS password can be entered with some USB keyboards. +

  + Version 1.40 - 2011-11-15 +.
  + Improved: The TPM on Intel TXT control enabled systems. +

  + Version 1.30 - 2011-10-27 +.
  + Initial production BIOS for these models. +

  I hope this will help you.

• Satellite Pro C660 - BIOS update error

  Hello

  Try to update one of my employees with bios 1.50 laptops (C660) and it displays an error message displaying 3 possible causes. Power adapter not connected not (it's) battery is less than 10% (it is not) and the BIOS is updated to the version 1.50. When I tried the update the laptop was running 1.00. So I updated the bios to 1.30 with no problems, but when you try to update to 1.50 it still shows the error.

  Any ideas? You will need to get the bios installed as seems to solve problems hitting the phone suffers from.

  Thank you

  Hey Buddy,

  What operating system is currently installed?

  BIOS update it of necessary this value-added package is installed and you run the update as an administrator. Also, make sure that the battery is fully charged.

  What is the model number of the C660?