Equium A200 - white screen at startup

Similar Questions

• HP Jet 11: White screen at startup

  My 11 HP workflow starts with a white screen on startup. Sometimes responds with a hard reset but still does not work. Have changed the settings to do nothing when the lid is open or start button / stop is pressed, but still problems.

  Hello

  Thanks for posting in the Forum from HP Support. Welcome!

  Looks like a problem of driver for me.

  Please, use HP Support Assistant = > http://support.hp.com/us-en/document/c03467905

  Make sure that you have applied all the latest drivers and updates from HP.

  Please, use Windows Update and check if you have installed all the latest patches.

  I would like to know if it works for you.

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Computer laptop white screen at startup

  A few days before, at a bend on a laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service. What are the possible causes for this problem?

  Hello Pierre,.

  Thank you for using Microsoft Community.

  1. does the computer boot to the desktop, or you see the white screen on startup of the computer?
  2 did you change on your computer?
  3. What is the brand and model of the laptop?
  4. as you mentioned, "when you turn on your laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service ', what exactly happens when you start the computer?

  If you get white screen SAT after the start of the desktop, then I suggest you follow this article and check.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Please answer with results so that we can help you further.

  Thank you

• PavilionDV4T-1400 white screen at startup

  I have a Pavilion DV4T-1400 , who immediately becomes a white screen on startup. I have no options. This happened out of nowhere.

  Here is some information:

  -Locks caps/scroll/num doesn't turn on when I press on the

  -It has a slight smell of burn on it when I turn it on

  -J' tried a hard reset (power off, then press on and hold power)

  -J' I tried to delete the memory, that I get no beeps, just a black screen and the scrolling/caps lock lights will Flash 4 times

  -J' had the computer almost 2 years warranty for 1 year.

  -J' have the knowledge/skills to remove and replace the maps system etc.

  I'm looking for some advice, or what someone might think the problem is, so I know what to replace.

  Any ideas? It is greatly appreciated. Thank you.

  Anything it is displayed on an external monitor? If so, it's the screen or the cable and not the mother/gpu card. If this isn't the case, the new, it's worse. According the description, of course looks a catastrophic failure of the motherboard. The slight burning smell is really a bad sign.

  Here's a motherboard on ebay:

  motherboard

  The price is a little high but lower than HP would be. Go down you $ 20 for a Exchange. There are also several services advertised on ebay that will repair your device for about the same price or a little less.

  Here is the manual if you choose to DIY:

  Manual

• Equium A200-1VO - screen not working no-lines out of feint

  Equium A200-1VO.
  Just got this about 2 months ago and only used it twice and the screen no longer works!
  It looks like its covered in lines of feint. From what I can do on the computer seems to be running ok.

  Any ideas?

  Have you tested the display to the external monitor?

  It might help to know if it s a graphics card or a matter of FL-inverter DC-AC/display.
  If the image appears correctly on the screen so I guess one of the FL-ups parties or internal TFT display of defects and must be replaced.

  But a question;
  Have you tried to update the display driver and BIOS? Check it!

• Satellite A200 - white screen with 3 beeps

  Hello

  My Toshiba Satellite A200 was recently gives me a white screen with 3 beeps at every start. I took it to my friend for repair and they told me that I had to take the battery out and put it so that it starts. It worked for him, but not me. I called technical support and told me it was a hardware problem with the memory or the motherboard.

  Anyone have the same problem and know what to do? I wouldn't mind not check memory myself I don't know where to start...

  Thank you

  Hi hpthinker,

  I think the support that you called is right and it s a hardware problem. Perhaps with memory or the motherboard

  The best way to fix this would be new modules of RAM because they can be easily replaced in a few minutes and are not expensive nowadays.
  Just so buy new modules of RAM in your local computer store, or ask your authorized service provider for this problem. They can offer you new RAM modules and you can test it again.

  By the way: If you have two RAM modules, test it with a module only.

• (Redirected) Precision M6500-white screen on startup and black screen on reboot

  Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

  1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

  2. the unit turns to the insertion of the battery.

  In order to isolate the root cause of these issues, I tried the following without success.

  1. replacement memory

  2. new display motherboard cable assembly

  3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

  Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

  The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

  Thank you

  engindigo

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Apple MacBook Pro with a white screen on startup, help!

  Hello world

  I was the creation of a powerpoint for an AE conference is next week and while running my Mac screen is temporarily deformed and then turned to white. I left for a while and then held down the power button to restart. On this operation, he got successfully to the stage where I enter my password, then displays the bar loading. At mid-way through charging it cut to white again and reworded. I then repeated several times, same result.

  Solve by looking at the options online, I tried following technical success:

  Command-R power on: goes to the white screen after the chime.

  Command-option-R-p: goes to the white screen after the chime and apple logo.

  Command-shift: enter the stage newspaper but then white screen.

  Command + S and fsck - fy: mac says is 'OK', rebooted and got the white screen after the chime and apple logo.

  Connected to the mac to work with cable Thunderbolt: mode target open successfully, but the drive does not appear on the mac to work.

  What can I do else?

  There is no apple in my store.

  This is a 17 "Mac Book Pro with El Captain OS X (don't know which) no history of problems...

  I hope someone can help.

  Freya

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  If you try a safe boot, just hold SHIFT when the computer comes on, not Command-Shift.

  In addition, if you can get to the login screen, try to hold SHIFT while you connect to your account (not while you type, but when you have finished your password and immediately after pressing enter/return).

• Equium A100: white screen

  Help! My laptop has a totally white screen and I can't get a display. I think it has something to do with my kids! I read the user manual, but am completely blocked. Can someone advise? The caps lock is on and I can't get rid of it either.
  Thank you

  Hello

  I guess that your children have changed something. Maybe it s not a malfunction of the equipment.
  What you can do is to connect the external monitor to the laptop.
  Check if you can see something on the external monitor. You can also try to change the display device with the FN + F5 key combination.

• Portege Z930 - white screen at startup

  My Z930 screen is empty at the start. The cursor can be seen when is moved around the screen, but there is no
  background a screen empty. stop holding the Start button / stop does not seem to work and the DSS led flashes slowly. When you open the lid of that unit starts automaticlly displays white screen and the cursor.

  I'm a computer completely illiterate, but if anyone can help me in words laymans terms, it will be a great help

  > now the button stop / stop does not seem to work

  That s is really bad.
  Due to Toshiba power button on document - http://aps2.toshiba-tro.de/kb0/FAQ3500560002R01.htm - should have the double function.
  Unplug the power plug and press and hold the power button / stop. I think the laptop must be turned off after a few seconds.

  Are you able to turn off your laptop somehow?
  Can you please elaborate on this subject? Since when did you notice this?
  Have you done something before your laptop started acting in this way?

• Satellite A200 - white screen and gel

  Hi Experts,

  I have this machine for 2 years. It was no problem. Last month, he began to display a white screen, and at the same time, it has been frozen after 3-4 hours running. Push the power button to restart, it fozen soon. I replaced a new fan and cleaned the dust inside. But the problem is still there. Someone has ideas what is the problem?

  Thanks in advance.

  Hello

  The issue appears only after a long period of use is good?
  Eventually the higher temperature affects the graphics chip.
  The question would appear again until the graphics chip to cool
  This is my theory
  What do you think about this?

  It could also be a RAM problem anything is possible and that is why each part must be verified
  In your case, I recommend you to contact a technician for laptop. The guys could check the parts. I mean it of better to check the hardware, then replace only the defective part rather than buy parts and hoped that the replacement would solve the problem.

  But listen buddy; If the graphics card chip is really affected then replace the motherboard and this could be a costly affair!

• White screen on startup of the satellite C850

  I bought a Toshiba Satellite C850 PSCBWA-05E001 so 18 months out of warranty now.
  I bought it for a few friends, I gave him to who are in the Philippines, so it is difficult for me to check and repair. My friends lack the funds to get it checked if any help would be appreciated.

  Some days he started to initiate a white screen. You can see the mouse, but that's all. They are unable to get the computer display anything. I read on several forums that it could be a video cable however I got them to hooked to an external monitor to work through the laptop's VGA output & restarted the laptop & the external monitor goes to white screen which are also seems to exclude a faulty video cable as this would affect the monitor to the laptop only I think.

  I'm concerned that does not the video card is a graphics chip of integregrated I guess that means to replace the whole motherboard I guess.

  Very disappointed for my friends since the machine is just out of warranty.
  Someone at - it ideas?

  > I am afraid that does not the video card is a graphics chip of integregrated I guess that means to replace the whole motherboard I guess.

  Yes, I have fear of the motherboard must be replaced in case of malfunction of the graphics card of m.
  It would be the worst cases because the new motherboard is very expensive and in most cases it s not worth buying a new motherboard if isn t valid warranty more.

  I have no many solutions for you; It looks like a hardware problem and to resolve this problem, replace the defective part. But of course, it of a just a question of money :(

• Satellite L450D - white screen at startup

  Hello

  my laptop shows a blank totally black screen on startup of the hard drive light is not blinking but I can hear the fan.

  Suggestions welcomed

  On this virtual path, it is not easy to say what the problem is here.
  Did you do something that might be responsible for such behavior of s to laptop? Update the BIOS maybe?

• Equium A100 - strange screen on startup

  Recently have been unable to get the use of my Equoum A100 - 549 PSAA4E due to no discerable to display on the screen during startup. It tends to be different vertical & horizontal lines. On the occasion of movement can be caused by the use of the touch pad and once seemed to get connected as had the windows start tune but sscreen still tartan in color.

  Is this a problem with the graphics card of th and it can replace? I've seen some other posts re welded/non-soude types - someone knows 100% what is in this model?

  Concerning
  Craigidi

  Hello

  I would not rely on statements like welding/resolder/etc. Since Don t you know really what could be the problem.

  I suggest you to send your machine to a local partner approved since your description sounds really serious.
  Maybe this link helps you find the next servicepartner in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  It s something like an «ASP "carrier who will guide you to the next available ASP.»

  Welcome them