Equium L10 will not enter OS after recovering with disc A60

Similar Questions

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• R51 new HARD drive will not restore factory correctly state with discs

  I caught a HDD of 80 GB on old computer my gf, and I thought I would use it to replace the 40 GB hard drive in my ThinkPad R51.  There is not really important info on my old hdd, so I just created a factory recovery disks, put on the new hard drive (both are PATA) and ran from Rescue and Recovery.  After completing restore to factory state all the new hard drive will do is Rescue and new Recovery charge.  It does not load Windows.  Is there anything else I need to do?

  Shot in the hip here, but ISTR that some versions of R & R restore the image of 'restoration' in HD, then you restart to R & R and run a restore it to complete the restore of the rest of the car.

  As I said, just something I've seen elsewhere.  Worth, perhaps,

  Z.

• When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move...

  When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are

  (1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...

  what I've done

  I did a key recovery... even I am facing problem... Please tell me the steps to fix

  Original title: DESKTOP PROBLEM

  Hello

  Check with Lenovo support, their drivers and documentation online and ask in their forums
  on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.

  =============================

  More troubleshooting if necessary:

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• Windows Vista will not be validated after clean install

  Windows key, title: product original vesta H P,.

  buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.

  Hi David,

  Install and activate the original operating system provided with the computer first (I guess it's XP).

  Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).

  Good luck!

  Kosh

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why the 66 java update will not install on my iMac with el capitan?

  Why the 66 java update will not install on my iMac with el capitan?

  I recommend that you work with Oracle to see if they are aware of any problems with El Capitan, Java is their product and they would know better. But I was able to find this, it might help you:

  https://oliverdowling.com.au/2015/10/09/oracles-JDK-8-on-Mac-OS-x-El-Capitan/

  BTW, is there a reason you need Java?

• Windows media player will not play a video file with a .zip extension

  Windows media player will not play a video file with a .zip wish.  What can I do to let him play?

  I checked and I have the latest version of windows media player.

  A .zip file is not a video file, it is a compressed file. Extract the video file in the zipped file.

  How to extract files Zip on Vista
  http://www.ehow.com/how_4913615_extract-zip-files-Vista.html

• Windows 7, will not accept an XP program, with on a d3drm.d11... How to fix... Thank you

  Windows 7, will not accept an XP program, with on a d3drm.d11... How to fix... Thank you

  Hi Ron,

  To provide the proper resolution, that I would need more information on your side.

  1. What is the name of the program that does not open?

  2. What is the accurate and complete error message?
  3. when, exactly, you get this error message? It is by running the program or the installation of the program?

  This problem can occur if the program is not compatible with Windows 7.

  Method 1:
  I suggest you try to open the program in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 2:
  If the problem persists, you can try to install XP Mode and then try to run the program in XP Mode.

  Note: XP Mode only works with Windows 7 Professional and ultimate edition. Try these steps if you are using Windows 7 Professional and ultimate edition.

  Windows XP Mode
  http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-XP-mode

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Equium L300 - will not install anything other than Microsoft downloads

  Equium L300 put up-to-date with Windows 7. I'm a novice PCs which concerns so any help welcome. My laptop will not install 'programmes' (for example Java AVG etc etc) to the bottom of charges, ask to run and then nothing happens. It is used to!

  I tried just about everything I can think but now can't see the forest for the trees. I stand to lose 50 pounds after he tried to update my sat nav!

  Hmmm... It's strange. Right click on setup.exe and run as administrator. In addition, disable the firewall/antivirus.

• Equium L10 does not recognize any PCMCIA wireless card I install

  Hello

  I just bought a brand new Toshiba Equium L10 and I can't get any wireless card to install. I tried different models of Belkin, Netgear and MSI, which works perfectly well on other laptops, but not on this one.

  The L10 is a clean build of Windows XP SP2 directly from the retailer and I am using the following steps to install the wireless network card:

  1. start Windows XP SP2 and log in as administrator
  2. run the software for the wireless card
  3. Insert the wireless card

  At this point, windows only recognizes the card as an ethernet adapter wireless and will not install the drivers. Even if I manually install and specifically point to the correct directory, it fails to pick up the pilots still and says that there is nothing in the directory for the material that I install.

  I have the latest version of the BIOS for the L10 and have tried all the following features without result:

  1. disable the legacy USB support in the BIOS
  2 disable built in ethernet
  3. run the Diagnostics of PC from Toshiba (reports that everything works just fine including PCMCIA)
  4 rebuild provided using DVD from Toshiba laptop

  Does anyone have an idea what could be wrong? It drives me crazy and I've never had this kind of problem with any other laptop. Is this a defect known with Toshiba laptops and what is the solution?
  Is this a problem with Win XP SP2? Is my laptop defective?

  Thanks in advance.

  Kind regards

  K.

  [Edited by: admin April 6 06 06:51]

  You can post the details of this card?
  Have you contacted the manufacturing of PCMCIA card for support? Maybe there is a new version of driver for this card.

  I've noticed some problems with Vodafone on a Satellite P10 PCMICA card. This card caused a blue screen on the unit. Well, the deactivation of the hyper-threading technology in BIOS has solved this problem. On other maps, the new version of driver also solved some strange problems.

  However, what I would say it is there are a lot of things that could be a bad influence.

  First of all I recommend you ask the card to support manufacturing.

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Satellite Pro L10 will not start

  Hi guys,.

  I have a Sat Pro L10 and I have a few problems with it. When I load up, I can enter the BIOS and everything seems fine, however, the date and time does not. I can't ge start beyond that point, it crashes just with a cursor flashing at the top left. The same goes for when I try and boot from CD. When I go out and put the battery back, I get a message saying WARNING CMOS Checksum failed - using the old configuration, F1 to resume or F2 to enter setup. I press F1 and the same again, just a flashing crusor.

  If anyone can help me diagnose this problem and fix it, it would be much more appreciated.

  Best regards
  James

  Hello

  At first read s manual, page 100 as well as page 104. You will find explanations on CMOS Checksum failed.

  To have fully loaded CMOS laptop battery must be powered ON 24 hours.