Equium L10 does not recognize any PCMCIA wireless card I install

Similar Questions

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

  Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

  It's impossible. LR is a non-destructive editor and photo management. For her to not see images of the files would make it one of the worst of these programs tyupes.

  So there is a parameter that you have screwed up in the import dialog window that prevents your DNG, TIFF, JPG, PSD, PNG, CMYK and film formats appear in the import window.

  So show us a screenshot of your import window.

  More than likely you have chosen a destination that has all the permissions read/write to your username.

• Computer does not recognize my camera SD card

  We installed a wireless router and now the computer does not recognize my camera SD card. I have

  no idea how to solve this problem.

  Detail please...

  I can only imagine you saying the Autorun window not
  longer starts when you connect the camera via a USB cable. ?

  Maybe the auto run settings need to be adjusted:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  If you have external or internal drive do you have
  the same question when you insert the SD card?

• Latestes Update 14.1.2 does not recognize the iMac graphics card.

  Hello

  I've updated my PS - CC to 14.1.2 and now my graphics card is not recognized.  The problem was supposed to have resolved this update.  I have an iMac 27 inch end 2012 with 32 GB memory and 1 TB of hard drive.  My graphics card is NVIDIA GeForce GTX 512 MB of 660M.   When you start PS - CC after the update, I received a message that my graphics card was not recognized and I need to update the driver.  As you have known, only Apple has updates to the graphics driver.  There is NO update driver on Apple.  Checking my preferences I don't have the ability to Open GL now.  My driver works well with 14.1.1.  I'll try to retreat towards the 14.1.1 if possible.  Any help would be appreciated!

  Dennis

  Here's an update of the above.  Just by chance, I found an interesting solution.  I restarted my computer and then open PS - CC 14.1.2.  I received the same message... PS does not recognize that your graphics card for people with disabilities advanced display options.  Otherword, NO Open GL graphics.  So, I closed PC - CC and rebooted just to see what would happen and... I don't have the error message.  Check the Preferrrence, found my recognized graphics card and I have Open GL.  If for some reason, the first time you open PC - CC 14.1.2 with iMac, your graphics card will not recognize.  Just close and open again and you'll get him back.  Weird!  Adobe, please fix this for us users of iMac!

  Dennis

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Equium A100 does not recognize the charger

  I was wondering if anyone has had the same problem as me. I plugged my laptop Equium A100 to load and it basically does not recognize that it has, a charger, it worked perfectly fine the other day and my computer still works fine.

  Does anyone know if this could be caused by the shipper or the laptop? If it is just the charger I have to go buy another.
  Any response would be appreciated.
  Thank you

  I don't know about you but there is a problem of contact between AC adapter slot and motherboard. If the power adapter is recognized sporadically, I have no other explanation.

  The best thing you can do is to contact the service. They should check it.
  The warranty is still valid?

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• OfficeJet J4680 does not recognize the password wireless

  Hello!

  Our wireless printer is grateful is no longer the password wireless. It will print if connected via FireWire/USB and it does not recognize the network, but he thinks that the password is wrong. There is no Ethernet port, so I can't connect it to the modem or the router to see if it would work like this. I restarted the modem, the router and the printer, but nothing seems to work. The password is correct. What can I do else?

  Sharron

  Nevermind - I went stupid but now solved the problem.

• Windows Media Player does not recognize ANY portable device

  Windows Media 12 does not recognize my mp3 player or ANY other portable device... I tried to restart my computer, I tried to clear the cache of the library..., but Windows Media player refuses to acknowledge portable devices...

  go to control panel > administrative tools > Services > Portable Device Enumerator Service

  Click on it and press the Start button and in the startup type: select "auto".
  Your problem should be solved

• iTunes does not recognize any of my iPhones (Windows 10)

  I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  I removed the lockdown folder.

  I tried several cables.

  When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

  More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

  What the hell is happening?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

  the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.  How to recognize the USB of the computer mouse.  I need a HP bluetooth mouse?  I can't work with this mouse, it has a funny scroll for it. It is too fast or too slow.  Help!

  < published by host >

  There is no reason why the iMac should not be able to use a USB mouse. With the mouse connected to the computer off the computer tower and turn it back on. Now it doesn't recognize the mouse? If this is not the case, try a SMC reset.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Dynadock - USB Port Replicator does not recognize any USB keyboard

  Hi can any body help?

  I have a Satalite pro L300-154 with a Dynadock - Replicator to USB Port, but it will not recognize any usb keyboard.

  Have you checked if the laptop would recognize the external USB keyboard connected directly to the computer laptop s USB port?

  Please check this!

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us