Equium M50: Problems with white screen at startup-> solved

Similar Questions

• HP Jet 11: White screen at startup

  My 11 HP workflow starts with a white screen on startup. Sometimes responds with a hard reset but still does not work. Have changed the settings to do nothing when the lid is open or start button / stop is pressed, but still problems.

  Hello

  Thanks for posting in the Forum from HP Support. Welcome!

  Looks like a problem of driver for me.

  Please, use HP Support Assistant = > http://support.hp.com/us-en/document/c03467905

  Make sure that you have applied all the latest drivers and updates from HP.

  Please, use Windows Update and check if you have installed all the latest patches.

  I would like to know if it works for you.

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Computer laptop white screen at startup

  A few days before, at a bend on a laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service. What are the possible causes for this problem?

  Hello Pierre,.

  Thank you for using Microsoft Community.

  1. does the computer boot to the desktop, or you see the white screen on startup of the computer?
  2 did you change on your computer?
  3. What is the brand and model of the laptop?
  4. as you mentioned, "when you turn on your laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service ', what exactly happens when you start the computer?

  If you get white screen SAT after the start of the desktop, then I suggest you follow this article and check.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Please answer with results so that we can help you further.

  Thank you

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Satellite L750 sometimes lit with white screen after hibernation

  When I got the system, sometimes awake hibenate with white screen!

  I noticed, when this happened, 'toshiba eco utility' is frozen.
  So, I think that: Toshiba Eco Utility is crushed, put into hibernation system and the awakening of the race, but screen blink.

  This time I push the power button, the system go to sleep and next push is normally awake!
  I don't know why. I use this app Eco Utility, but I'll delete it.

  Anyone?

  You deleted the Toshiba eco utility of the system now?
  Did you notice the same problem when you Hibernate your laptop using other profiles of power?

• PavilionDV4T-1400 white screen at startup

  I have a Pavilion DV4T-1400 , who immediately becomes a white screen on startup. I have no options. This happened out of nowhere.

  Here is some information:

  -Locks caps/scroll/num doesn't turn on when I press on the

  -It has a slight smell of burn on it when I turn it on

  -J' tried a hard reset (power off, then press on and hold power)

  -J' I tried to delete the memory, that I get no beeps, just a black screen and the scrolling/caps lock lights will Flash 4 times

  -J' had the computer almost 2 years warranty for 1 year.

  -J' have the knowledge/skills to remove and replace the maps system etc.

  I'm looking for some advice, or what someone might think the problem is, so I know what to replace.

  Any ideas? It is greatly appreciated. Thank you.

  Anything it is displayed on an external monitor? If so, it's the screen or the cable and not the mother/gpu card. If this isn't the case, the new, it's worse. According the description, of course looks a catastrophic failure of the motherboard. The slight burning smell is really a bad sign.

  Here's a motherboard on ebay:

  motherboard

  The price is a little high but lower than HP would be. Go down you $ 20 for a Exchange. There are also several services advertised on ebay that will repair your device for about the same price or a little less.

  Here is the manual if you choose to DIY:

  Manual

• AMD Radeon 7570-devices is not compatible with Windows 10 - you're going to have problems with your screen

  Microsoft will come out with Windows 10, as an upgrade of the free operating system next month, July 29, 2015. They came out with an app, 'Get Windows 10', which is intended to help the operating system upgrade process. In this app, it checks for compatibility issues that may exist between your computer and their new Windows 10.  I get results for two of compatibility issues when I run this app. The one that concerns me, it is with the video card that came with my computer, AMD Radeon HD 7570.

  The app tells me: "these devices are not completely compatible with Windows 10" and he adds "you will encounter problems with your screen."

  Is there any driver updates that resolve this problem?

  The driver, I installed on my pc is Advanced Micro Devices, Inc. version 8.960.11.2000

  Windows says that the driver is up-to-date.

  If no driver is available to correct this problem will be I need to replace the video card in my computer and if so with what?

  I currently use two screens, a LG 22EA53 (analog) and an Acer S230HL without any problems with Windows 7, Home Premium, Service Pack 1.

  Malygris1,

  Well, son of a gun... looks that microsoft has made changes in their updates.

  Now when you run the "'get 10 app Windows, check your PC ' it reads in devices..." "0 problems found."

  Looks like Microsoft do with last-minute changes, as you indicated, and others have mentioned about being patient on this matter, that they may (?) have addressed this problem.  Probably won't suddenly course up until the update is done.

  Guess for now, I have to score this as accept as a Solution.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• Problem with matrix/screen in Qosmio F55-Q502

  Hello

  For a few weeks, I have a strange problem with matrix/screen of my laptop.
  The matrix flickers very often - no matter if the power cable is plugged in or not.
  The screen is full intensity and all of a sudden it starts flashing - it gets darker, lighter, usually for a few / dozen seconds. It does when no one touches or when I'm working on it.
  This very annoying and making eyes tired - he does it very fast and there is few levels of screen brightness.

  In addition, sometimes the screen turns off - you can see what is on the desktop but the screen is very very dark (but not empty or completely off). No reason - sometimes just in the workplace, sometimes for example when I touch (not pull) the power cable between the laptop and the power supply.
  Then, the only way to return to normal brightness of screen id to close the lid just for half a second and open it
  -matrix comes on normally, but can 'turns off' moment later and I have to do it once more - sometimes even several times...
  After 'action' with cover screens it seems that nothing ever happens...

  Anyone an idea what is the cause of such behavior or how to diagnose in details?
  Or maybe solve this problem?

  Best regards
  300 m

  Sounds like the backlight or inverter fails, or there is a bad connection.

  Is the unit under warranty? Send it to an ASP for repair.

  You should avoid to repair yourself, the backlight is very high voltage!

• Problem with switching screens

  Hello, I have a problem with switching screens. Here is my code (both screens extends screen):

  SerializableAttribute public class Main extends UiApplication {}

  Private TrainLinkScreen trainLinkScreen;
  Private WorkingScreen workingScreen;
  private string;

  Public Shared Sub main (String [] args) {}
  new hand (.enterEventDispatcher ());
  }

  public Main() {}
  workingScreen = new WorkingScreen();
  pushScreen (workingScreen);

  try {}
  trainLinkScreen = new TrainLinkScreen();
  } catch (GpsException ex) {}
  message = ex.getMessage ();
  } catch (FileException ex) {}
  message = ex.getMessage ();
  }
  If (message! = null &! message.equals("")) {}
  invokeLater (new Runnable() {}

  public void run() {}
  Dialog.Alert (message);
  System.Exit (1);
  }
  });
  } else {}
  popScreen (workingScreen);
  pushScreen (trainLinkScreen);
  }
  }
  }

  The problem is that the workingScreen is not displayed. The download takes a little time, so I wanted to put here a screen like "I work, please wait...". ", but he appears, the unit freezes for a few seconds and then the trainLinkScreen appears. Could someone please write where is the problem? I tried invokeLater on the first screen, but it ends with the crash on popScreen (trainLinkScreen). I tried invokeLater on trycatch also block, but it does not work either. Help, please.

  Thank you. I already have the solution (I hope that ), I put to device gps location in a separate method (it's a small part of the code that does not have too much time to finish), she called before initialization and initialization in method invokeLater as a thread (the large part, too download from the internet). The display works perfectly in this way (in the first place, the "Download" screen appears and then comes the rest of the code) Although some other things seems to not work properly now

• Screen on my Equium M50 problem

  Hello

  new here so please bear with me.

  I have an Equium M50, recently the screen has gradually turned white, then move you the angle and it goes back normal tro, this wasent a major problem, BUT it's not all white. IM guessig its probably a cable issue, but uncertain and help or advice would be appreciatted and wouldn't be a repair I could finish?

  Mark

  Hello

  It s not easy to say if he e only one loses the cable or a serious hardware problem.
  I don t think you have enough experience and tools to solve this problem yourself.

  I mean that you need to check if the Fl inverter is ok and that the laptop computer s screen is not affected. How do check you this?

  In my opinion it s advisable to ask a technician for laptop computer to help him.
  Therefore, it would be advisable to contact the ASP in your country for a control of the laptop.

  Good bye

• Apple MacBook Pro with a white screen on startup, help!

  Hello world

  I was the creation of a powerpoint for an AE conference is next week and while running my Mac screen is temporarily deformed and then turned to white. I left for a while and then held down the power button to restart. On this operation, he got successfully to the stage where I enter my password, then displays the bar loading. At mid-way through charging it cut to white again and reworded. I then repeated several times, same result.

  Solve by looking at the options online, I tried following technical success:

  Command-R power on: goes to the white screen after the chime.

  Command-option-R-p: goes to the white screen after the chime and apple logo.

  Command-shift: enter the stage newspaper but then white screen.

  Command + S and fsck - fy: mac says is 'OK', rebooted and got the white screen after the chime and apple logo.

  Connected to the mac to work with cable Thunderbolt: mode target open successfully, but the drive does not appear on the mac to work.

  What can I do else?

  There is no apple in my store.

  This is a 17 "Mac Book Pro with El Captain OS X (don't know which) no history of problems...

  I hope someone can help.

  Freya

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  If you try a safe boot, just hold SHIFT when the computer comes on, not Command-Shift.

  In addition, if you can get to the login screen, try to hold SHIFT while you connect to your account (not while you type, but when you have finished your password and immediately after pressing enter/return).

• Computer hangs on a white screen on startup with the keyboard is plugged.

  Original title: I have a problem starting

  I have a problem when I start my pc with my internet stick plugged and it hangs on a white screen. I have to get the key out and close my pc and reboot to get to the screen to login manually.

  This also happens randomly - some days it just starts with the key and the other days he dislikes the key and goes to blank screen.

  Why is this randomly - this is my question? If the settings are the same so why did happen randomly instead of blocking me or just start every time? Why is it random?

  Equipped with Vista

  Hi donga65,

  • To go through the other advice?

  Try Method 1 to downstairs, go to the method 2 If this does not resolve the issue.

  Method 1: You can update the drivers for the computer to check the issue. Log on to the manufacturer's Web site and install all the device driver updates including the chipset. See if it helps.

  Method 2: Make sure that the BIOS (Basic Input\Output System) is not altered. Check the boot sequence and make sure that the hard drive is the first boot device. Check with the manufacturer for more details.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

• (Redirected) Precision M6500-white screen on startup and black screen on reboot

  Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

  1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

  2. the unit turns to the insertion of the battery.

  In order to isolate the root cause of these issues, I tried the following without success.

  1. replacement memory

  2. new display motherboard cable assembly

  3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

  Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

  The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

  Thank you

  engindigo

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.