Satellite L750 sometimes lit with white screen after hibernation

Similar Questions

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• Satellite Pro 4030 boots with white screen - works OK on an external monitor

  My sat 4030 pro, Vibrio W98SE, boots to a white screen. When I press the lid closer, or use Fn/F5 it turns black. It works fine on an external monitor.

  Hi Robert,.

  If your screen is displayed correctly on an external monitor, then it indicates that your chip graohics still work correctly, then you the problem must be with the LCD itself, the FL inverter or the connecting cable to the main Board. I would recommend that you contact an authorized Service partner who can perform other tests to diagnose the fault.

  Kind regards

• White screen after hibernation

  After that "recovery windows" appears on the screen, screen turns off and remains empty. Must say / reconnect power to desktop.

  After downloading a recent update from MS Win7 for thr mobile intel express chipset, resume after hibernating started working perfectly!  Mr. Bill Ground Zero

• Satellite Pro A300 crashes with white screen

  I have a Satellite Pro A300, AMD processor, Vista, ATI graphics card.

  The system worked fine for a year, but there are a few months, he started crashing, the screen went white, not blue, whatever it be running, like music, stopped. This can occur after several hours or minutes, or even if he is re-start. All my software is up-to-date, Microsoft and Toshiba. I rebuilt my system from scratch and the symptoms came back.

  At first I thought that this could be a heat problem, but I followed this but I don't think that's it. It crashed seconds after leaving standby mode when it has not had a chance to warm up.

  Anyone have any ideas?

  Simon

  Hey Buddy,

  Theoretically, it might be an overheating problem so the screen became due white built in overheating protection...

  You should try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In your case, I recommend reading this article:

• Windows 7 Pro: crashes with white screen after login

  Dear community,

  I have an annoying bug with Windows 7 Professional (64-bit version) and could not find any problem even until that or other forums.

  After logging in (choose user and entering the password), the "Welcome" screen appears for a few seconds. Then there is a blank wallpaper (i.e. According to the user settings) and the system is blocked. Everything you see is a mouse cursor (a regular), who move, but not possible interaction.

  It does not work to get the Task Manager with CTRL-ALT-DEL in that State, and at least until 30 minutes just don't get past/changes. However, there is ongoing activity of hard disk, according to the LED. Only way out is to cut using the power switch.

  The accident happened exactly regularly, but about every start of the second. Sometimes more often (i.e. it takes 3 or 4 attempts to open a session) or sometimes less often (i.e. up to 3 or 4 boots without problem).

  Other than that, it is once you have successfully connected, the system works very well.

  I tried to remove the user and re-create it, but the bug reappears immediately after.

  Any ideas? Or advice where I could find what program/process is actually blocked?

  Hi Ruth & all,

  Thanks for your suggestions.

  Troubleshooting took a long time, because I do not use this PC every day and sometimes you can't tell if the problem is really gone or the boot just happened to work several times in a row...

  After all, using the clean boot and the reactivation of services/startup items one by one, it seems that I could single out the Internet of G-Data as a cause security suite. I'm trying to do, with their support, if this is a known bug.

  Best,

  Colin

• G460 problem with brightness screen after hibernation

  Hello. I've owned the G460 for about 2 months now and have noticed a problem.

  I use the laptop at home and at work. When I finished, I put in the system hibernation. After doing this several times (it does not happen immediately), the screen goes to full brightness and I cannot use the function and go up or down keys to change the brightness of the screen.

  I've upgraded to the new firmware to see if that would fix it, but he did not.

  I am running a processor Core i5 with graphics discrete and Win7 64 bit.

  Thanks help RL fo!

  PS: I hate the touch pad. It is not useless, but has a rate of click hurt much more than any other pad I used on Toshibas, valleys and apples. I went out and bought a bluetooth mouse to "solve" the problem.

  
  

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• No screen after hibernation

  I have a Lenovo Ideapad Z580. It came with Windows 7 Home Basic 64 - bit Service Pack1 preinstalled. But he did not not no editor GPO in it. Whenever I typed gpedit.msc in the run window or the start menu, nothing appeared. After awhile, I upgraded to Home Premium using Windows Anytime Upgrade. The problem mentioned above still exists. Now a new problem of cultures. whenever I put in Hibernate my laptop, after hibernation there is no welcome screen. Without asking for password, it simply connects. What are the possible symptoms of this problem?

  Hello

  Editions of Windows 7 (Home Premium, Home Basic edition and Starter) do not come with Group Policy Editor. Only Windows 7 Professional, Enterprise and Ultimate editions come with the installed Group Policy Editor.

  For question regarding with the Welcome screen after hibernation, you can follow the methods mentioned below.

  Method 1:

  You can run the troubleshooter. Check out the following link.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:

  You can read the following article.

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  See also:

  Sleep and extended: frequently asked questions

   http://Windows.Microsoft.com/is-is/Windows7/sleep-and-hibernation-frequently-asked-questions

  It will be useful.

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• Satellite L555 simply freezes with black screen (White Stripes)

  Hello

  I'm having some problems with my new Toshiba Satellite L555 laptop, it is simply freeze and appears a black screen with white bands.
  He don't do it regularly, but it's annoying.

  Any suggestions?

  Hello

  The possible reasons:

  1. a malfubction graphics card
  Malfunctioning of the internal display 2. You can view the external monitor to see how it is?

  As little as possible:

  1 a graphics driver
  2 operating system itself. Have you tried to reset to factory settings (F8)?

  Otherwise, you must contact the Asp (SAV) in your country. Your laptop is still new and under warranty, so it will fix it for free.

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.