Equivalent of PowerShell for script following VBScript determine the active node of the cluster?

Similar Questions

• ESA: Determine the cluster communication

  Hello

  Is there a way to determine if a cluster of ESA use SSH or CCS for cluster communications?

  Concerning

  A

  If they have been defined for the cluster and communication by host name - as long as you know the IP addresses which interfaces need to connect on, it shouldn't be a problem.

  You will be presented a notification:

  All machines in the cluster will communicate with each other by IP address.

  To make this change, you must specify IP addresses for 2 machines already in the cluster. You have this information and wishes to move forward? [N] >

  You can then commit the changes to update the config.  It should not affect any current communication or treatment.

• Soft pictures for Mac: how to determine the size of the image file

  Question: in the Photos for Mac, how can I determine the size of a photo or a video file

  Set-up the info panel does not include the size of the file.

  

  Furthermore, I don't see any place where I can do a "show in finder" to find the information in this way.

  Thank you!

  Can you not with the right button on the image file in the folder, the images are stored in, select "Get Info" and then find the size of the file in this way?

• Different response time for each virtual server in the cluster, weblogic 11g

  
  Hello everyone
  
  currently I set up a server with the following characteristics.
  
  O.S. AIX 7
  RAM 32 G
  WebLogic 11 g
  Cluster 4 Server (4 GB each).
  
  My Web the application is deployed on the 4 using servers the management console on another physical server.
  
  J’ai responsible for tests on each server get different time as follows:
  
  Server 1: HostApp: 7090 -> 13 8 seconds
  Server 2: HostApp: 7090 -13 > 5 seconds
  Server 3: HostApp: 7090 -10 > 4 seconds
  Server 4: HostApp: 7090 -> 8 seconds
  
  distribution the load is material.
  
  Why This behavior?
  
  expected be around the same value or not?

  
  

  Thank you

  Please see my comments below:

  1. what made the request? It goes to the database? He calls a web service? Provide details

  2. how to access the application, you have a web server or a load balancer? Provide details.

  2 - is a web application? Is possible to test the application from a browser in the same area where the weblogic?

  I would try that because in this way we can isolate the problem to understand if this is a network problem or a matter of WebLogic Server.

  Best regards

  Luz

• IPCC Express - determine the age of current contact

  I am looking for a way to determine the age of the current contact during execution of the script. Something like a stage that would match the current age of current contact in a few seconds, then that could be stored in a variable and a value of trigger in an If / then. This could be used to trigger a backup CSQ overflow (if contact is longer than 90 seconds, then route the call to the queue of backup). Normally I use a loop and simply count the number of times that I spend in the loop, but for a specific application, it would be preferable to use the age contact instead. Any suggestions greatly appreciated.

  Thank you

  Chris

  Check:

  Download Statistical Reporting (general article)

  Purpose of report: CSQ ICD

  Field: Current wait time

  Position in queue

  Expected time-out

  Connected resources

  Row identifier: should be your CSQ identifier or string variable

  Statistical variable: Variable that you want to fill in your script.

  As you will see, there are many choices. I think that the current waiting time might be what you want.

• Determine the Version of InDesign (for equivalent javascript applescript)

  I have next to no knowledge of javascript, or where to go for help? I have an Applescript easy I want to convert it to javascript.

  For starters, anyone knows the equivalent following javascript code for this line of code:

  the version of the application 'com.adobe.InDesign' myVersion id value as string

  The other part of the script, I might be able to understand mine. Unless at some point given I have to find a PC user to provide the path to the folder 'en_US' of the InDesign preferences folder.

  With the help of a File.openDialog (); would get around not knowing the path hard-coded, but defeats the purpose and effectiveness of the script. I want the end user to be able to assign a shortcut to this script, which would open so all their files in InDesign library with a simple keyboard command.

  -Determine what version of InDesign, running as a string

  Tell application id "com.adobe.InDesign".

  activate

  the version of the application 'com.adobe.InDesign' myVersion id value as string

  -Display dialog myVersion

  If myVersion begins with '6' then

  myVersion set to "version 6.0".

  Otherwise, if myVersion begins with "7.0" then

  myVersion set to "Version 7.0".

  Otherwise, if myVersion begins with "7.5" then

  myVersion set to "Version 7.5.

  Otherwise, if myVersion begins with '8.' then

  myVersion set to "Version 8.0".

  Otherwise, if myVersion begins with '9.' then

  myVersion set to "Version 9.0.

  Otherwise, if myVersion begins with "10.0" then

  myVersion set to "version 10.0.

  Otherwise, if myVersion begins with "11.0" then

  myVersion set to "version 11.0.

  end if

  tell the end

  Tell application "Finder".

  Try

  the ((chemin d'accès àle dossier de l'utilisateur actuel en tant que texte Unicode) folder this_folder value & "Library: Preferences: Adobe InDesign:" & myVersion & ": en_US:Valpak_Libraries:")

  in case of error

  Tell application "SystemUIServer".

  activate

  display dialog "cannot find the VPLibraries file. Or maybe it's in the wrong place? "& return & return &" make sure all your libraries {files} reside in: "& return & return &" Admin > library > Preferences > Adobe InDesign > "& myVersion &" > en_US > Valpak_Libraries "buttons {"Cancel"} default button"Cancel"with icon stop

  tell the end

  try to end

  tell the end

  Set question to {'different'}

  Tell application id "com.adobe.InDesign".

  activate

  Repeat with i in this_folder

  Try

  i name the value theName

  If theName contains question then

  I opened

  end if

  try to end

  end repeat

  tell the end

  Hi Jeff,

  for ExtendScript (JavaScript), you can search for properties, values and functions etc.pp. here:

  Excellent documentation of DOM of Jongware. Go for chm files, if you want to search in offline mode:

  InDesign JavaScript help

  And by Gregor Fellenz DOM documentation:

  InDesign ExtendScript API (8.0)

  InDesign ExtendScript API (10.0)

  InDesign ExtendScript API (11.0)

  If you search for 'application', you'll notice, this is a 'version' "app" object property

  var myVersion = "version"+" "+parseFloat(app.version);
  alert(myVersion);
  

  No ifs and ifs remains necessary.

  Uwe

• Can't find Script engine "VBScript" for Script alongwith the path of the file

  Original title: Vb Script engine

  Dear all.

  I downloaded the update to Android 2.2 Froyo on motorola Web site. When I run the exe, I get a message, can't find Script engine "VBScript" for Script alongwith the path of the file. Once I click Ok, the exe execution is aborted. Please suggest a solution for this problem. I have Windows Home Premium 64 bit OS

  Rgds,

  Sachin.

  Hello

  1 did you change on your computer before this problem?

  2 are you able to install any other software on your computer?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system, I would say you follow these steps and see if it works very well.

  Method 1

  Try to install the program in high mode.

  (a) right click the program.

  (b) select run as administrator.

  Method 2
  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.
  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.
  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.
  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:
  DllRegisterServer in vbscript.dll successful.
  e. now right-click on the Setup file of windows cleanup utility and select run as administrator.

  Method 2

  If the problem persists, you can run the System File Checker and see if it works fine.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check whether the problem is resolved.

• Can't find script engine "VBScript" for...

  I have a lot of files in VB Script I execute to do various things on my computer.  Yesterday, I started getting an error popup with the text displayed in the title of this post.  The additional information was the actual path/file that I was trying to run.  It's also manifests itself in my event viewer I'm unable to receive "online help" because of the same error pop up.

  What became of my script processor?  I can find "wscript.exe" in my system32 directory, and it seems to work because I can bring up the host settings dialog box, but this is as far as I can go.  Any idea on how to re-enable this feature?

  Bill

  The entry is:

  [HKEY_CLASSES_ROOT\CLSID\ {B54F3741-5B07-11cf-A4B0-00AA004A55E8} \InprocServer32]
  @= "C:\\Program Files\\Alwil Software\\Avast5\\AhAScr.dll"

  The registry key should point to the following:

  C:\Windows\system32\vbscript.dll

  See the post ninth in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/cant-find-script-engine-VBScript-for-script/960f24d1-BF92-4CEC-b73e-520a04891073?page=1

  To change the value data, you may need to change the permissions on the key.

• do I need Windows PowerShell integrated scripting tool for home computer and access to the internet, powershell

  do I need Windows PowerShell integrated scripting tool for computer and internet access

  No you didn't he need for home computer and internet access

• Determine the specific user permissions for a script

  With a bit of advice from LucD (thanks!), I finished a script simple last night that removes the clones, defines the network cards, takes snapshots, etc to automate a procurement process.

  Initially, I was running the script as a user with limited permissions but frustrating after a few hours, I found that I couldn't see some objects with this user.  I tried (briefly) extend the privileges on the role of the user has been assigned, but I couldn't get the right combination and finally gave up and executed the script as an administrator and it worked.

  I hope that someone will be there to tell me there is a quick and easy to run a Profiler against a script (or look at the server logs) which lists the specific permissions are required when running a script?  I suspect that would save a lot of time on trying to figure out which of the hundreds of privileges must be defined for the user running the script.  If not, I'm going to nuclear dawn somewhat undesirable to administrator.

  Any ideas?  Thank you all!

  The best source for starters is required for routine privileges.

  But take care of is not to create too many roles in your environment.

  For a presentation full privileges (with a short description), you can do

  $authMgr = Get-View AuthorizationManager
  
  $authMgr.Description.Privilege |Select Key,Summary
  

• Equivalent of PowerShell to esxcfg - vmknic.pl

  Hello

  I've been to the lookout on the forums for a while that we adopt ESX3i but now it's time to actually ask a question because I'm out of ideas.

  I'm looking for is an equivalent of Toolbox of powershell/VI esxcfg - vmknic.pl - Server

  I created a virtual machine port group, and then use the perl script and the above settings to "convert" to a group of VMkernel Port that will be used for vMotion.  It works as I want, but I do not hardcode a path of a script that may or may not exist.

  My investigations have turned up a possible answer, who expected in theory (in my mind at least) work, but he keeps asking me an IP address and a subnet mask while the perl script method is very happy to leave it to DHCP, which is what I want.

  The method of powershell (as shown by d_hristov at the beginning of August) I've tried is

  The help of New-VMHostNetworkAdapter said that leaving the switch - IP will be average that DHCP will be used, but which does not appear to be the case because the line causes an error indicating that an IP address is required when you create a VM Core adapter.

  I can miss a fundamental aspect that I just dove into it with that powershell/ESX little knowledge that I have, but I was able to sort most of the things out there (with the knowledge on these forums) so that we can automate the configuration of an ESX host.  Any chance someone could enlighten me as to why things don't work?

  Thank you

  James

  I wonder if a portgroup VMkernel with DHCP is a valid configuration or not?

  I know that the with esxcfg orders you can configure what a portgroup VMKernel.

  esxcfg-vswitch -A  
  esxcfg-vmknic -a  -i DHCP
  

  But if you look in the SDK, the AddVirtualNic method said "in the case of a server ESX, DHCP is not supported, and will throw this exception " under the fault InvalidArgument.

  And if you try to use the following syntax you indeed get an InvalidArgument fault.

  $esxname = 
  $pgname = 
  $swname = 
  
  $esx = (Get-VMHost -Name $esxname) | Get-View
  $hns = Get-View -Id $esx.configManager.networkSystem
  
  $pgspec = New-Object VMware.Vim.HostPortGroupSpec
  $pgspec.name = $pgname
  $pgspec.Policy = New-Object VMware.Vim.HostNetworkPolicy
  $pgspec.vlanId = 0
  $pgspec.vswitchName = $swname
  $hns.AddPortGroup($pgspec)
  
  $nicspec = New-Object VMware.Vim.HostVirtualNicSpec
  $nicspec.ip = New-Object VMware.Vim.HostIpConfig
  $nicspec.ip.dhcp = $true
  
  $hns.AddVirtualNic($pgname, $nicspec)
  

  Can anyone shed a light?

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.

• CScript error: can not find script engine "VBScript" script "C:\Windows\system32\slmgr.vbs '.

  Separated from this thread.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 6XY48 - 6B28M-CT77B
  Windows product key hash: A2HudJl9EiKfe6vK5BX00Jal5xY =
  Windows product ID: 00426-437-1608992-85320
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {524C3FC6-4B03-418B-81FA-D2814D3AA07C} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.150113 - 1808
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {524C3FC6-4B03-418B-81FA-D2814D3AA07C}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-CT77B00426-437-1608992-853205S-1-5-21-885106373-165730409-1007669906HP-Pavilion,FK479AV-ABA s3600tPhoenix Technologies, LTD5.2120081111000000.000000 + 000E2133E07018400F804090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  CScript error: can not find script engine "VBScript" script "C:\Windows\system32\slmgr.vbs '.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:24:2015 23:39
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NgAAAAEABAABAAEAAAACAAAAAwABAAEAeqh + Xbz8xnTi8LyK7MXC/OIlmPVvhP7Tg/oDekbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  It comes to my report.  Windows has been 'validate' for three hours now.  What should I do?

  Hi Thea,.

  Thanks for posting your query on the Microsoft Community. I'll be happy to help you today. I wish to inform you that it is a problem with the license of software on the computer. I would like to know if you get an error message upon activation.

  If you have made significant physical changes to your PC, like replacing your hard drive or motherboard, you must contact support to activate Windows by phone:

  http://support.Microsoft.com/kb/950929

  Please follow the steps mentioned below to activate Windows on your computer:

  (a) click Start and in the search for box type: slui.exe 4

  (b) press ENTER on your keyboard

  (c) select your country.

  (d) opting for the phone activation option and ask the help of activation team.

  You can also check out the link below:

  http://support.Microsoft.com/kb/950929/en-us

  For more information, do not hesitate to contact us. We will be more than happy to help you.

• Script to determine the type of OS related

  Hello

  I am trying to determine the version or the name of the operating system used by the Client of the view for use in a Powershell script. I know that in the variables view / volatile environment that ViewClient_Type stores Windows, but I would like to get more detailed, then just information Windows. I was wondering if anyone had come across similar scenarios and might be able to provide assistance or suggestions on ways to circumvent this. The environment is running VMWare View 5.0.

  I tried to use a remote WMI query - that works fine for a user admin, but the majority of users is an admin rather than on the local client, and I'm a little reluctant to the idea of having to change the WMI security on each client to make it work.

  Any help would be great.

  Thank you

  Alan

  Try this one..# ==============================================================================================
  #
  #
  # NAME: ADCompOSinfo
  #
  # AUTHOR: Mohamed Garrana ,
  # DATE  : 3/25/2010
  #
  # COMMENT:
  # This script connects to Active Directory OU or just the root of the domain and recursivly gets all the computer objects
  # for each AD computer object it gets the Opertating system Type , Version and Service pack using information of the AD object
  # ============================================================================================== 
  
  function get-alladcomputers { 
  
      Trap { Write-Host -ForegroundColor Red "   <<< Error >>>  could not connect to Active directory, please make sure that ADpath var is correctly SET !"
          Break 
  
      } 
  
      $ADpath = "LDAP://DC=mantrac,DC=win2k,DC=dom"
      $searcher = New-Object DirectoryServices.DirectorySearcher
      $RootSearch = New-Object directoryservices.directoryentry $ADpath
      $searcher.searchroot = $RootSearch
      $searcher.filter = "(objectClass=computer)"
      $allcomps = $searcher.findall()
      foreach ($comp in $allcomps) { get-adcomputerinfo }
      $objs = $allcomps | Measure-Object
      $objcount = $objs.Count
      Write-Host -BackgroundColor green -ForegroundColor blue " Script succesfully Completed on $objcount Active Directory computer objects"
      } 
  
  function get-adcomputerinfo {
      BEGIN { }
      PROCESS  {
      Write-Host $comp.Properties.name
      try {
      $name = $comp.Properties.name[0]
      $os= $comp.Properties.operatingsystem[0]
      $osver= $comp.Properties.operatingsystemversion[0]
      $ossp=$comp.Properties.operatingsystemservicepack[0]
      }
      Catch {
      Write-Host -ForegroundColor Red "   <<< WHoops ... >>>  $name : Error reading a required property from the AD computer object, this might be a cluster resource name or the property has a null value . execution will continue anyway ;)"
          continue
          }
      finally { 
  
      $computer = New-Object psobject
      $Computer | Add-Member NoteProperty Name ($name)
      $computer | Add-Member NoteProperty OperatingSystem ($os)
      $Computer | Add-Member NoteProperty OSVersion ($osver)
      $computer | Add-Member Noteproperty OSServicePack ($ossp)
      Write-Output $computer
      }
      }
      END{}
  }
  #set your variables :-  
  
  #setting the ADpath variable
  $ADpath = "LDAP://DC=microsoft,DC=com" # this will grap all the AD computer objects in the microsoft.com domain
  #$ADpath = "LDAP://OU=Marketing,DC=Microsoft,DC=dom" #this will grap all the AD computer objects in the marketing OU in the microsoft domain 
  
  #you can use the script like this to export the output into a csv file with all the computers and their OS information
  $outfile = "c:\test\ADcomps2.csv" #sets the location of the out csv file if you'r going to use Export-csv
  get-alladcomputers | Export-Csv $outfile 
  
  #you can use the script like this to see a nice grid view of all the computers and their OS information
  get-alladcomputers | Out-GridView
  

  Cheers, Udin

• shell script to determine the width of the file, size, resolution cs5 js

  I use a Script of Michael L Hale (core.quickMetadata "that uses" xmp.getProperty "and the bridge") to determine the size and the resolution of files without having to open or place.

  Unfortunately, it fails with some files (non-Photoshop generated bitmaps, seems).

  (PDF, I treat differently altogether to avoid the problem determination pages pdf counties and potential problems with PDFs containing different size pages.)

  "None of you do not know if and how you can reach resolution with" app.system "in CS5, the height, the width of the files?

  I may have come across before, but is unable to locate such a thread currently.

  Thanks for any input.

  The following 2 options that you can use if you want to clear all information in text file then analyze js. You could see if one of these contain the data that you are after?

  #target bridge
  
  var foo = File('~/Desktop/SomeFile.tif');
  
  getAllXMLSIPS(foo);
  
  //getMetaDataMDLS(foo)
  
  function getAllXMLSIPS(f) {
       if (f instanceof File && f.exists) {
            var shellString = "sips --getProperty allxml ";
            shellString += f.fsName;
            shellString += ' > ~/Documents/StdOut.txt';
            app.system(shellString);
       }
  }
  
  function getMetaDataMDLS(f) {
       if (f instanceof File && f.exists) {
            var shellString = "/usr/bin/mdls ";
            shellString += f.fsName;
            shellString += ' > ~/Documents/StdOut.txt';
            app.system(shellString);
       }
  }