Different response time for each virtual server in the cluster, weblogic 11g

Similar Questions

• You will need to run Adobe Customization Wizard each time for each new update of the player?

  Hello

  This should be a simple question...

  I run Adobe Customization Wizard each time on each new incremental update of player, or just once a major revision (Reader 9, Reader X)?

  Not answered this question because it would be better asked in the forum for enterprise deployment. The Wiz is a tool of deployment of the NTS and is used only for initial deployments in most cases. It allows to customize the installer and the product when it is first installed. You can use it for all installations, but it is a less common scenario.

  Usually, you customize the first version you install and then just apply updates as they become available.

  HTH.

  Ben

• IOPS / s & latency for each virtual computer

  It's my first time to write a script to metrics out of the virtual environment and I'm trying to get out of the latency of disk IOPS and total / s disk for each virtual machine in the environment.

  Here are the relevant excerpts I have at the moment:

  #Get powered on virtual machines

  $VMs = get - VM? {$_.powerstate - eq "Receptor"}

  #Loop through each virtual computer

  {foreach ($vm to $VMs)

  $dskreadlatency = get-Stat-entity $vm - Stat "disk.totalreadlatency.average" - Start $start - finishing $end

  $dskwritelatency = get-Stat-entity $vm - Stat "disk.totalwritelatency.average" - Start $start - finishing $end

  $dsknumberwrites = get-Stat-entity $vm - Stat "virtualdisk.numberwriteaveraged.average" - Start $start - finishing $end

  $dsknumberreads = get-Stat-entity $vm - Stat "virtualdisk.numberreadaveraged.average" - Start $start - finishing $end

  }

  #setting fields to the averages of the stats (I have 4 of them)

  = [string] $fieldX ([Math]: Round ((($dskYYY |))) Measure - Object - average value). Average), 2))

  Unfortunately, I get 0 for all these statistics.  My level settings are all set to 2.  It would be awesome if I could help in this regard.

  Just to make sure that the performance data entry process are correctly configured on vCenter, you see the data for these counters on the performance for the same time interval tab?

• RDM for several virtual machines on the same LUN

  Hi, I have a requirement for multiple virtual machines to have access to the same LUN filestore. I think create ROW for each virtual computer to the LUN. I wanted to ask if this is possible and if someone put in place before?

  Are there issues making this record to file/san locks?

  Thank you

  Once you add the raw device map to a virtual computer, you can not add it to each other as well.

  It would satisfy your requirement to add to a virtual computer, assign it a drive name or folder, then that spread out and have another card SMV a drive to it?  Depending on what you're trying to do, which can satisfy because it will work.

  Rich

• 4 virtual servers in a single physical Machine with a physical LAN card, how possible to assign 4 different unique to each virtual server IP address?

  Can someone tell me please, that each server Machine should have an IP address of seprtae to connect the client computers. If we have 4 Server virtual machines in VMware in a physical server with a LAN card with only a MAC address. How can assign us the same IP address to all computers in Virtual Server 4? While we need four IP addresses of different/seprate for each server computer to connect to client computers. can someone explain to me please. (will be greate if you can give me a few examples). Thanks in advance.

  You will need four different IP for each virtual machine, and each VM will have a different MAC address generated automatically by vSphere.

  Assuming you are using vSphere, I highly recommend you take a look at this document: http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• How can I assign a static ip for each virtual machine

  I have the NIC 2 and 3 vm on my vm server.

  I did find documentation how to assign an ip for each virtual computer fix.

  pleas help me... but probably easy...

  Assuming you have the management and the virtual machines on the same network, attach both rising/NIC bindings to the vSwitch0, configure the management network and tie each VM to the port "VM Network" group. As DSTAVERT mentioned, the IP of the virtual machine configuration is done in the VM themselves, as if they were physical systems.

  sample:

  

  If you have different subnets for the management and the virtual machines, you must either create multiple vSwitches or work with the VLAN.

  André

• How to measure the time for each mapping?

  I use oracle11g with OWB.
  
  I have several mapping and each dimension tables to update the mapping.
  
  I want to measure how long it takes to complete each mapping. What is the best way to find the total time for each mapping.
  
  One way is, we can have POST MAPPING and PROCESS of MAPPING PRE. I can trigger the stored procedure to enter the start time and the end time of each match. On this basis, I can calculate the total time for each mapping. But I have 50 mapping. Now, I need to write 50 different stored procedure and open the POST-PROCESSING of the MAPPING and PROCESS OF MAPPING of the PRE for each mapping. It is complex.
  
  Is there another way, we enter the total for each mapping of execution? Y at - it that no data in OWF_ MGR dictionary can help on this?
  
  I would be grateful if someone can help me on this.

  He will remain forever unless you purge it explicitly.

  See you soon
  Katia

• For the last week or three Firefox updated two or three times for each update and sometimes for no apparent reason...

  For the last week or three Firefox updates two or three times for each update. Sometimes it refreshes without obvious reason. For example, I'll be in the middle of typing in the message forum block & it refreshes. Or by filling out an online form. Or simply viewing a page.

  You can check for problems caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• Maximum processor for each virtual computer cores

  Hello

  I need some advice on the maximum number of CPU cores that we assigned to each virtual machine, as well as the maximum number of processor cores physical on the host machine.

  I stumbled on some features of mention about the virtual processors and virtual cores.  Are they referring to the same thing?

  1 virtual core is equivalent to how many physical basis?  1 virtual CPU is equivalent number of physical CPU or core?

  Appreciate your kind reply on above.  Thank you.

  Concerning

  cleohm

  On ESX 1 vCPU is a logical basis.

  It is a heart in a CPU socket, but could also be logical fundamental of a core (if you have HT enable).

  On ESX/ESXi 3.5, there is a limit of max 4 vCPU for each virtual computer.

  On ESX/ESXi 4.0, there is a limit of max 8 vCPU for each virtual computer, but you will need virtual hardware 7 and a license of the company more

  See: http://www.vmware.com/products/vsphere/buy/editions_comparison.html

  André

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Change the host for a virtual machine on a cluster and the host is not in accordance with the attached profile

  Hi all

  I have 02 questions.

  1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.

  But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.

  How to do this?

  2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message

  "Configuration problems: host is not in accordance with the attached profile.

  I suspect that this is the case for my question 1?

  Thank you very much

  Hello

  I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >

  Under Data Mover

  HardwareAcceleratedInit

  HardwareAcceleratedMove
  

  
  

  Under VMFS3

  HardwareAcceleratedLocking

  Compliance status is returned to the green.

  Thanks for the advice guys!

  Thank you

• get the time for each transaction

  Hi Master,

  Someone asked me a question.

  I have a pl/sql block with multiple DML operations. How do you know how much time took each DML operation (not on a single table, tables different operations are underway in my pl/sql block)?  Like this

  Update statement

  INSERT statement

  Remove the statement

  I replied like that... Use dbms_utility.get_time... If each statement how long it takes... We can easily find...!  Once, he said... no I want to use predefined packages. DBA does not accept.

  How can I fix this... Masters?

  Please advise... !!!

  Concerning

  AR

  
  

  DBA will no longer accept pkgs installation... !!

  Create an account of RTO and defend his position to not use standard Oracle supplied packages, take the DBA.

  Therefore, these packages should already be installed.

  (Some essential element of the information seems to be missing).

  Since no valid rationale was given for this crazy requirement (IMHO), the correct solution may possibly be: replace your DBA.

  (I'd love to hear from experienced 'why' people, this requirement would be valid.)

  MK

• Form - different default value for each new line needed

  Hi all
  
  I'm a newbie in the APEX and now I am struggling with a problem in the form of tables.
  
  On my page, I report master detail, where the detailed part is created in a table form (I used the Wizard).
  
  Now I want to implement the following:
  
  When I click on the button that adds the line of tabular form, I want to assign the default value for the column 'LOGNO' in my tabular form. Value for this column is table extraction and I this value already stored on the page to display one element 'P210_LOGNO_ACT '.
  
  When I click on the button for one second third etc.) times I would like to set the default for the column LOGNO as LOGNO = P210_LOGNO_ACT + 1.
  
  Y at - it something simple, or is - this difficult to attribute the different value to each new row of tabular form?
  
  Version of the apex 4.1.0.00.32
  
  Thanks in advance!
  
  Jiri

  Inspect your column and find out the name of your column attribute, it must be something like fxx (f01, f02, f03... etc) and use this column instead of f11 (in my case, the name attribute is f11)

  Create a JavaScript function in your page header

  function myaddRow() {
  //perform standard addrow
    addRow();
    //set default value here
  //make sure you replace the P5_X with your page item name
    $s('P5_X',parseInt($v('P5_X'))+1);
    $('input[name="f11"]')[$('input[name="f11"]').length-1].value=$v('P5_X');
  }
  

  Change your button to add a line and call the function above, as shown below

  javascript:myaddRow();
  

  See this example of work http://apex.oracle.com/pls/apex/f?p=46417:5