Eraser tool does not?
Adobe photoshop cs6 and assistance with the opacity and flow at 100%, using brush or pencil in the correct layer tool, I have questions, get Eraser tool to work. Any ideas?
A thought can be save and reopen the case if crop you the image, or change its color mode.
I fear that it means what it says: you cannot go further back than the culture you've probably run, because it's now the size of the image. Another solution is to crop later.
Gene
Tags: Photoshop
Similar Questions
-
Eraser tool does not work for the black layer mask
I'm trying to put a black layer mask and use Eraser tool to change. Unfortunately the Eraser tool does not. I'm not knowingly do anything differently that I did in the past. Recently, I did a round of software updates for CS6. I was wondering if anyone else is experienceing this and if there is a solution?
Verify that the in the Toolbox foreground color is set to black. (in front of when using the Brush tool)
Press D, and then press the X key.
And opacity and flow are 100%.
Most people use the brush on the layer masks and you might find that works better.
-
I can't make it work in my practice using the Eraser tool session. Help, "Pour effacer to erase any object on the artboard, leave all unselected objects."
It works - until I stop the drag of the mouse and release the button. Then fill and paths bounce from invisibility instantly.
GM, with Win 7 and HAVE cs5.
Get it - I think.
The Eraser tool works, but only paths that are filled, even if only partially.
In addition, it does not at all with raster images.
If true, the part of the aid, 'Clear objects using the Eraser tool' needs a bit of clarification.
GM
-
My Eraser tool does not correctly work :(
Please excuse my bad English, but this is not my first language.
When editing images with photoshop, I normally create a curves layer to adjust the color and then use the top Eraser tool to erase parts of it where I don't want the effect curves to be seen (I don't know if that makes no sense). I mean, instead of use the selections to edit different parts of the image separatedly, I use the Eraser tool because I found that it works better for me if I erase the effect of the parts of the image where I don't want it to be.
The thing is, this morning I just changed and it worked fine, and suddenly gum has stopped working on the curves layer. IF I create a new layer and draw a black line with my brush and try to delete it, it works. But it will not remove a portion of the curves layer.
I looked on the Internet for solutions, and none of them worked. I made sure that the layer was not locked, I checked the opacity, reset the tool and photoshop itself, then reset the computer, and I don't know what else to do. I use photoshop CS4 in a PC.
If someone could help me that would be very, very appreciated ():
Thank you very much!!
Hello, I think you need to reset the default colors by using the D"" key.
In fact, you change the mask still, but you apply the colours in reverse order as if you were using the Brush tool.
Another useful shortcut: X that will switch the foreground and background colors.
-
I click the Eraser tool and then try to use it and it will erase anything. It simply doesn't get it. Is there a way to force them to work?
There is no lock on the layer. I tried to put a layer mask with transparency on this issue and it worked then. Thank you for your interest to help!
-
OK... I've been on this problem for a few weeks. I've lost the reason, or they have changed something.
I just want to take the eraser, a round circle tool and erase! Now, the PS will not erase the WHOLE circle at the edge of the circle (eraser). I must have done something and never pushed button I could thing to correct it. It allows to be I could put the eraser on something and KNOW exactly where she would start to erase. Sigh. Can someone help this Noob Forum. Thank you
Thanks a lot, this is a very good idea. Of course, I lost my mind because I "thought" I had a hard edge erasing for years... so I don't know what my mind! Bah. Ty a lot for trying to help
-
[(Windows XP) looking for a cure to issue:]
["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."](After typing regsvr32 mshtml.dll then press Enter :)met the following error message:"mshtml.dll was loaded, but DllRegisterServer entry point was not found.This file cannot be saved. »How can I fix above error message?-Alan.Hi Alan,
· Did you do changes on the computer before the show?
· Are you referring to an article in Microsoft?
Follow these methods.
Method 1: Follow the following steps:
(a) click on Start, run, type cmd and press enter.
(b) in the command prompt, run these commands:
regsvr32 Jscript.dll
regsvr32 Msi.dll
regsvr32 Oledb32.dll.
regsvr32 Msado15.dll.
regsvr32 Mshtmled.dll
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 3: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
The cutting tool does not work after windows updates.
I read answers to similar questions about the failure of the cutting tool. I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware. It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work. I don't have to go through hoops of restorations etc to get something it seems work was broken by updates. I'm about to go to a Mac.
It worked for me! Thank you!
-
Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...
If you have
one of the following AV, antivirus, programs installed, it will stop your
Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
on the same machine will create conflicts.
Bottom line: it's ok.
It's normal.
List of AVs which will stop Windows DefenderNorton
McAfee
AVG
Microsoft Security
EssentialsIf you do not have the
above AV programs, here's how to do to restart Windows Defender:Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
topic status , it must be said... Has begun
under Startup Type, it must be said... Automatic
If it does not say that, right click on Windows
Defender > click Properties > to
Startup type, click on the pointer to the right and select automatic
to the service status, click Start
Click OK when finished. -
Print screen with Snipping Tool does not.
Print screen or capture tool work. They worked very well in the past, but now neither one works. Back to zero does not solve the problem.
Screenshot doesn't seem to do anything in the copy buffer because even if the block occurs, nothing sticks in.
Snipping Tool just shows a black with a red around him border screen, instead of the actual screen shot (no matter the option I select IE free Style or whole screen, etc.), I have Vista Home Premium with all service packs.
Thank you
This should be the final resolution to my problem of Snipping Tool/print screen:
1. I downloaded and ran the Malwarebytes program as recommended. And BTW, I don't see this recommendation here. I'm fairly new participant in Forums, so maybe there's a reason that I see here this recommendation I don't know. The Malwarebytes has really done his job and even if I run MS Essentials program found Malwarebytes 25 hits of Mal-ware on this PC. Once I have it fixes these problems, the symptoms of my problem of Snipping Tools became less consistent.
If Malwarebytes fixed part of the problem with the Snipping incroyables.* *.
2 but the final resolution is that it turns out that there is that one Internet site where the tool captures will not work and it is my Bank. I know that my Bank suggested I run a program called safety report. It's my theory that is my bank site or report has something programmed into it that prevents screen either with the tool to capture and print screen captures. If I go into my bank site with Internet Explorer or Mozilla Firefox, the Snipping Tool will not work. However, the Snipping Tool works everywhere else. It's all the other websites and in other programs.
The Snipping Tool does not work on my banking site (probably because of the REPORT) and maybe it will not work on other sites closely to secure *.
Thank you very much for the help.
-
Problem of the eclipse - signing tool does not
Hello
The Signature tool does not load in my copy of eclipse. I'm running the beta version 7 in Eclipse Helios. When I select 'sign with Signature tool... ". "in the menu, nothing happens. The only chance I have is to try to 'All together', but that works only intermittently.
Any ideas?
Thank you
I had the same problem: you need to select your project in the Project Explorer, and then right-click, select Blackberry--> sign with signature tool...
-
The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon. However if I select snipping tool in the menu start nothing happens at all.
Original legislative:
M.
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
Hi I have PSCC and move the tool does not move object.
A square dotted is displayed when the mouse is pressed but disappears when publishing.
Anyone who knows?
Thank you
Mikael
Okay, looks like the automatic selection is enabled. Look in the top toolbar and uncheck the automatic selection.
-
Align the tool does not align?
Interesting title good haha. Basically, I had problems recently while using the Repeater. I am trying to create this effect, where you have different forms and other things to appear and disappear. But, when I come to align these forms to the center of the model, in fact all this moves to the right, aligning any. Here is a video to show you exactly what I mean: Dropbox - After Effects Finn.mp4 Repeater problem
Thanks for any help!
The align tool does not see the items generated, because they are not real paths. There is nothing wrong or unusual here. Form operatirs wirk on rendering / pixelation level, they may not generate paths. You must align things manually.
Mylenium
-
License repair tool does not work.
License repair tool does not (windows 8.1):
It is said python25.dll is absent, but does not lack.
I deleted the download and tried again. The same problem.
Any ideas please?
Please note that this license repair tool is not valid for the latest versions of Acrobat. It became obsolete after Acrobat 9.
Thank you
Rahul
Maybe you are looking for
-
SER all-in-one HP Deskjet 3630: printers and drivers
How to install the software of HP Deskjet 3630 series all-in-one software on a laptop Windows 8.1?
-
Lenovo ZTE A2107 pny micro SD card damaged
I'm new to this forum so I don't know what to say really, but I'll try to give as much information as possible. Recently, I bought a micro SD 8 GB of PNY card with an adapter card. I slipped the upper part of the back of the stand upward and inserted
-
R60 freezes seconds after moving the mouse
As the title says, my R60 freezes (no response from the mouse or keyboard) moving the mouse (that it either via USB mouse, touchpad or red dot-in-the-keyboard). Can I use the keyboard to navigate through the menus / use the computer normally, but as
-
Problem with HP Wireless TV Connect 2.0
I can't connect the transmitter and the receiver. I even had a new transmitter delivered to my HP. But I still get a message saying: "Please activate record on transmitter unit" do not know how to do this and there is no instructions anywhere to fi
-
I uninstalled creative Audiology to a 5.1 to my computer, where can I get an another sound driver for installation with 2 speakers?