Problem of the eclipse - signing tool does not

Similar Questions

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• The Healing Brush tool does not appear in my tools. Where is he?

  The Healing Brush tool does not appear in my tools. Where is he?

  Thank you

  Kevin

  What happens if you do a right click on this icon in the Options bar at the top and select Reset all tools?

  

• Compress files old option in the disk cleanup tool does not seem to do anything

  original title: compress old files

  How to compress old files? When I run Disk Cleanup, the compress old files is checked, but the cleaning does not remove the 13, 464KO here. How can I get rid of this?

  Hello

  http://www.ehow.com/facts_6010913_can-old-files-disk-cleanup_.html

  Compress old files

  • This option, which is the only option that does not remove the files, compresses the files on the operating system that have not been consulted after a certain period of time. The files are not deleted, but simply compressed into a smaller size since they are not used and are accessible by the operating system if they are needed once more.

• problem with the ios certificate server does not update the CRL

  Hi all

  The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.

  I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.

  The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.

  If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.

  So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.

  Can anyone help?

  Thank you.

  Hey Marc (?)

  This seems to correspond to this bug:

  CSCsy95838    AC IOS: LCR of the not updated, update timer not started

  However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.

  I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.

  I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.

  As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:

    crypto pki certificate map certACL 10    serial-number ne    serial-number ne    etc. 

    crypto pki trustpoint myTP

     match certificate certACL
  
      (note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed) 

  Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.
  HTH
  Herbert

  --

  If this post answered your question, please click the button of "right answer".

• Shift-click with the spot removal tool does not remove the straight lines

  Hello, I am after a tutorial on Lynda.com, which demonstrates the use of the spot removal tool to remove a task from a straight line.  Click on one of the ends of the line, hold the SHIFT key and click on the other end of the line.  Pouf!  Nothing happens.  The technique works very well for me in Photoshop.

  I have a PC with Windows 7 Pro 64 bit and Lightroom CC 2015.6.1, Camera Raw 9.6.

  In fact he worked sporadically on the image of a practical, but hot in a reliable way and does not at all in all the other images that I try.    Advice will be greatly appreciated.

  Thanks - Dave

  The technique is

  Hold the SHIFT key FIRST, then click and drag horizontal or vertical.

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• the spot removal tool does not work

  Hello

  I am a new user of Lightroom 5 and everything goes smoothly apart from what happened this morning.

  When you're under the Spot Removal Tool-, you have the Clone and heal options mode. They used to work perfectly until yesterday and today when I click on one of them that I go to the photo would report - to develop, he painted a white mark and when fined you it does nothing.

  It allows to create a circle that you can move to select the texture and color that suits you. Now, this no longer appears. I must have pressed a button on the keyboard that caused this!

  I tried to reset everything from this morning and nothing works... Please let me know how to solve this problem.

  Much appreciated in advance... I will provide more details if necessary.

  Concerning

  Anthony

  Looks like more of an issue.

  To display the area of the source you want healing to come again, try pressing 'H', while the heal tool is selected.  You may need to press it several times.

  If no healing does occur it sounds like you may have the opacity on the too, right tunred down.  Increase the opacity to 100 slider... or to whatever setting find you works.

• Why the Clone/Heal tool does not remove a white spot?

  After being embarrassed by failing to check the Clone/heal tool to ensure that the opacity has been properly resolved, I am encouraged to ask another question which is not affected by the appropriate correction that in fact the tool works very well in most cases. However, the LR4 (and previously LR 3) use) iMac 27 quad) at odd intervals, some images present themselves with a single white spot, usually on a blue background, which cannot be removed or cloned with the LR Clone/heal tool. It can be removed with the cloning tool in PS, but not in the LR. I don't know whence the tasks. Sometimes they appear in a sequence of 3-4 or just individually. A copy of one is attached here. I don't know if this place is an aberration in LR or my cameras. As it happened with different cameras, I assume that there is a problem with the LR. Any comments?

  It looks like an adjustment brush.

  Hit your adjustment brush and see if a PIN is displayed. Select the Pin and remove it.  The task disappears? If so, that's the problem. Double check to ensure that it is not part of a series of strokes on the image somewhere else.

• Please, I m using a Logic Pro 9 and the key "Advanced"(tools) does not seem to me in the 'preferences'. ". Why? Help!

  If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!

  Because there is no mode "Advanced Tool' to Logic 9.

  Logic 9 is always and only has an advanced mode, there is no other method.

  Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.

• Wake up to the problem of the ring - Fax modem does not have wake up reliable PC from sleep mode - how to 100% reliable?

  When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time, but not all the time.  I want to wake up the PC everytime, with 100% reliability.  (When the PC is on, the modem and the machine to receive faxes beautifully.)

  What do you suggest me?

  Modem: Conexant D850 PCI V.92 Modem with the recent update of driver to version 7.67.0.50 (2007-07-03) (but this problem is the same today as before with the 2004 driver version)
  PC: Dell Optiplex 755
  Processor: Intel Core 2 Duo E4600 @ 2400 MHz
  RAM: 2 GB, of which 1.4 GB is usually free
  BIOS: A14
  OS: WinXPPro SP3 with all updates
  AV: Avast free Home
  Anti-spyware: free SpywareBlaster, Spybot S & D free and AdAware anniversary free
  Fax software: Console MS Fax that comes with WinXPPro SP3
  Printer/Fax printer: HP OfficeJet Pro 8500 Wireless AIO (A909g model)
  Screen saver: Logo "XP" after 9 minutes. do NOT show the Welcome screen on resume
  Power settings: Home/Office Desk. Turn off screen after 10 minutes; Turn off hard disks never; System to sleep after 20 minutes; Hibernation ever; Do NOT ask for password when the computer wakes mode standby
  Home Ethernet network connection: card Intel (r) 2-82566DM Gigabit Network Connection with all function Wake on LAN settings WE.
  Browser: Firefox latest but they use IE occasionally when necessary
  E-mail: MS Outlook Express 6 for mail POP3/SMTP service
  Miscellaneous: I also run LogMeInFree version 4 on all my home computers

  Thank you.

  I'm sorry, but I do not know how Wake on Ring more reliable.   I doubt the reliability of 100% is possible.

  I suggest you obtain a separate fax machine.

• I have a problem with the CD/DVD-rom does not.

  Original title: CD-ROM/DVD-ROM and drivers

  Hello

  My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
  -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
  -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

  I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  What are my options?

  Mario

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  http://support.Microsoft.com/kb/982116/en-us

  Your registry may be damaged. (Code 19)

  This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

• Refine the matte Soft tool does not properly.

  Every tutorial I see online (like this: Adobe after effects CC: how to use the tool edge refine - YouTube ) on the use of the Matte Soft refine tool is striking just on a cut piece of film and it automatically gives a key more sweet that still leaves the small details like strands of hair in your shooting. However, whenever I apply it to my cut images, it gives me a strange halo around my person. Here's a screenshot to show you what I mean:

  http://i.imgur.com/5E7vV9J.PNG

  and

  http://i.imgur.com/k38Qvxl.PNG

  Any help on what I should do differently would be much appreciated!

  PS I know that title that youtube tutorial say "refine Edge Tool" and not "refine Soft Matte", but he talks about it in the second half of the video.

  OK, so I just tried to apply preset animations > Image utility > key key light + cleaner + spill suppressor and everything seems to work fine. I really believe that something is not communicate properly on my system, but this workaround works fine, so all I guess.

• Why the Replace Color tool does not replace my color?

  I have the following situation:

  White in the image.

  Choose the color replacement tool

  Choose a red color

  Apply the white color tool

  Nothing happens

  Change color to light mode

  Receive a brownish band where the tool is applied

  Change the color mode and apply the tool to brownish band

  Receive a red strip, where was formerly the brownish one.

  See the three States of the image in the attachment.

  Why was not applied in the first and replaced color replacement tool white with red?

  

  White is not one any colour change, because there is nothing to change.  Try to place a filled layer of red, above a layer filled with white and setting the blending mode of the layer of the red color to the color.  It just goes to white.  Now fill in the color of white background with grey wire (any value will do.  The darker the gray, the more saturated the Red will become.  Less of the tracks until you get 50% gray.  From there in complete darkness, it becomes darker. When you reach the full black, once more, there is nothing for the color work on, and it appears black.

  It is a useful exercise of understanding how to mix work modes.