Similar Questions

• Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely. What can I do? Thank you

  Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely, even on VERY small 72 dpi images. What can I do? Thank you!

  Double check all settings in the crop tool and make sure that you are not say things to create an image of HUGE due to your settings.

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/

• Photoshop CS6 will save the file as EPS or PDF.

  Hi guys. Forum first time poster here. It left me speechless.

  Computer: Intel (r) Core i7 with 16 GB of RAM and 600 GB free on my C: drive, you use Windows 10 and extended CS6.

  I have a complex shape file (made primarily of a pen tool) which is a solid color, with the text of the string in a headband which have been converted to shapefiles. I merged the individual forms into one, and it won't save. I tried to save it with them separated, and it won't save as EPS or PDF. It will save as PNG, JPEG and PSD.

  I need to save as EPS or PDF so that I can have sent to the printer.

  Both get a message "will not save due to program error".
  She will record her earnings per share if I remove "include vector data", but I need that checked. So, what could be the problem? All the paths look accurate.

  Help?

  * Oh! And I got 2 other people try to save the original file in case it was my program, and that they could not do it either. IT's not Photoshop, this is the file. Photoshop AND has access to 74% of usage, so it's not that either. **

  And you made me find the answer, Trevor.Dennis.

  You helped me to realize that the original forms have been disturbing Photoshop. Either he had too many vector points or... a link curve that he did not like... so since they are all form files, I merged them all together. Then, with the tool pen is selected, click right and choose 'set Custom Shape'... After about 10 minutes of waiting, Photoshop has accepted this and allowed me to save.

  Then, I created the new document and put the image there via the custom shape file. And he saved.
  TADA!

  Thanks again,

  Gwenn

• Brush/Pencil/Eraser tool will only create horizontal lines on Cintiq 12wx?

  I use Flash CS3 on a Macbook really over a year old and just move to a PC this last week. Because I can't crossgrade my license of CS3, I downloaded the trial version of CC Flash to use between now and when my school will give me the full license next month. Last night, things were working very well except for a problem with the audio, do not sync to the top when I tried to play my animated film. When I open Flash again this morning, I couldn't even shoot. Whenever I try to use the Eraser brush, or record the Pencil tools, all the Flash are horizontal lines, like this:

  After slightly more than looks, I discovered that this does not occur when I use my mouse, but only when I use the stylus on my Cintiq 12wx (my computer is a Lenovo from Y70 Touch Windows 8, if it's useful). I'm trying to figure out what I could do or what setting I could possibly changed between yesterday evening and this morning could have caused this, but I am at a loss. I have the latest version of Flash and the latest versions of Wacom Legacy drivers. Because I'm so new to this version and the windows as a whole, I am quite confused and frustrated by this whole situation. The solution is probably needed, but any advice would be wonderful. Thank you.

  Yep, reinstall the drivers Wacom worked. Thanks a ton.

• How can I get Eraser Tool E to the eraser (No E) tool

  I'm using CS5.  I have attached 2 photos, one of them annotated and flattened the layers I have many times.

  I opened it later because I want to erase a part of what I wrote and find that I only Eraser Tool E.

  I tried every conceivable type of photo, but nothing affects the gum e.

  Does anyone know how one chooses Eraser Tool E?  It seems to me that's what I did.

  How to deselect one?

  Suzie

  In a Mac uninstaller is in the same folder as the application.   / Applications/adobe Photoshop CS5/uninstall Adobe Photoshop CS5.

  If you think that your installation discs are defective, download installer CS5 here: Download Adobe Creative Suite 5 products

  After uninstallation, run the cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems

  If you are running a later version of Mac OS x, soaps that CS5 is "unsigned" and security of Mac may have a problem with it.

  Disable it temporarily by assigning the value "Anywhere."

  

• Archives to remove RMAN will save the files on a backup server?

  Environment:
  Oracle 11.2.0.3 EE on Solaris 10.5
  
  I do NOT currently use an RMAN Repository (coming soon).
  
  I have a primary database, sending logs to a wait.
  
  My retention policy is defined as 'WINDOW of RECOVERY OF 8 DAYS'.
  
  Question: RMAN will remove the log archiving of files on the standby server, after that they become obsolete based on the retention policy or I have to delete manually via command o/s?
  
  The fact that I do NOT use an RMAN Repository at the time where it makes a difference?
  
  Cannot find the answer in the documentation.
  
  Thank you very much!!
  
  -gary

  Hello again Gary;

  Sorry for the delay.

  Why did you suggested better?

  No, it's not better, but I'd rather manage the archives. This method works, period.

  This fact (running a backup every 4 hours) makes my irrelevant archivelog deletion policy?

  # Policy is important.

  Have the principal value:

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY
  

  But the 'NONE' value on standby.

  The worst thing that can happen is THAT RMAN will bark when you try to delete something. (it's a good thing)

  How we prevent the backup process archive backup of a file to archive log before it is shipped to the waiting?

  Should be a non-issue, the archive does not move, it AGAIN is transported and applied. To SQL monitor time (Transport and apply)

  For Data Guard I consider getting a copy of

  "Oracle Data Guard 11g Handbook"-Larry Carpenter (AKA Dr. Paranoid) ISBN 978-0-07-162111-2

  Best book of the Oracle I've read in 10 years. Cover a ton of ground clear.

  Forum for Data Guard also here:

  Data Guard

  Best regards

  mseberg

  Published by: mseberg on April 10, 2012 16:39

• I made a form for my clients, I did this form with a button "submit" button, the button will save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is complete

  I made a form for my clients, I did this form with a button "submit" button, the button Save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is supplemented by my clients it send to my email address not the URL how to change this.

  No matter how you have configured the Send button when you use the feature distribute the form. There are some e-mail address is in your identity preferences (Edit > preferences > identity) and use it. If you can change the email address it or not to use distribute the form and the button send the value you want.

  One thing that happens when you use the feature to distribute the form is the form is enabled Reader, you can do separately, but you really shouldn't do if the form must be used by others. The dispenser a form must activate using their copy under license of Acrobat Reader.

• Clicking on one in first Pro 2015 masking tools will make the application crash. Why?

  Hello!

  I use Adobe first Pro CC 2015 on a Macbook Pro retina, model with 8 GB ram and OS X El Capitan Beta at the end of 2013.

  Whenever I click on any of the masking tools, be it, circle, curved square or Béziers, it makes the application crash.

  No idea why?

  Something to do with my ram capacity? Or El Capitan? Because with the Mavericks, I could hide without any problem.

  Can anyone help, thanks a lot!

  Hello

  Maybe it's not your RAM that is causing the problem, but the beta version of EL Capitan, which is undergoing trials of phase and so is Adobe with Apple's new OS applications. So, we can not provide legitimate action to perform on the beta version.

  If please wait patiently for the official release of Apple OS and hope that all applicvations works perfectly.

  Vinay

• Eraser tool is not clear completely on the edge of the guide. Help, please!

  It is probably a very simple solution, I just have no idea where to go to fix it.

  For example, the screenshot below is a document photoshop with a blue object.

  When I use the Eraser tool, will erase, but it is not all the way in which the slider Guide where he shows that he will erase to erase.

  I need to find the settings to fix the eraser to erase completely and fully all the way to the guide.

  Any help is greatly appreciated.

  Thank you

  

  If the size of the slider he settled on something else than normal in system preferences > universal access

  

• The store update will remove old save the State of device during the installation of the new version?

  We will therefore say I installed an app on the app store and it is version 1.0 and it was save States to save my best personal score, that will save the State and score be removed when I install a version update (1.1)?

  I ask because I'm about to start using save States and need to know how to save to keep the original save the State through different versions that could come, so he has not erased each time.

  It'll keep all your saved data, so you don't need to worry.

• After scanning in a file, I can't save the PDF file with a unique file name, it will only back up in its original name; Otherwise, if I save the name of the file under a new name, save it box goes outside and the file is renamed and saved. Help!

  If I analyze the file and its original name is:

  Ssrv395alm76439... and I want to rename it "background."

  If I have the rename, the file won't save. If I leave the file as it will save and I have to go to an additional folder and rename it.

  Help, it's too long. I just click on "Save as" and rename and save the document in the necessary folder at a time!

  Hi Allisonchristinele ,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Like 'save' will save the changes with the file & "save under" will give the window using which can save the file to any location on the system.

  I would like to know is what is happening with some or all the files.

  Also, please try to check with the different user account to reproduce the problem.

  Kind regards

  Christian

• [Table ADF Faces component] How to save the current state?

  Hello
  
  the ADF faces table component is great!
  You can drag-and - drop columns, sort columns...
  
  Now, we have an obligation to save the State of the table for subsequent sessions.
  The return of the user wants to get the same State as last time (order requirement or sort of column), even if he comes back a few days later.
  Is this possible?
  
  I discovered, that this information is stored in the session cookie. But this cookie is discarded in a few minutes...
  
  Any tips?

  fschulze,

  If you use 11 GR 1 material - you can read about MDS in chapters 33 and 34 of the Fusion for the ADF Developer's Guide - it does exactly what you ask... an update, don't know if it will save the sort order, but the documentation specifically mentions column reorganization as being recorded.

  John

• Paint erasing tool

  I'll have to get used to paint for the first time. After I selected a box with the tool delete, how to enable it? (I'm just stupid?)

  Moved from the community involvement Center

  I'll have to get used to paint for the first time. After I selected a box with the tool delete, how to enable it? (I'm just stupid?)

  1. Firstly, while learning, work on copies of images, not the original image.

  2. After selecting the Eraser tool, go to the size to select the width of the eraser.

  3 erasing

  Don

• Until I save the minutes of meeting on windows Notepad did an update and my data is gone

  Is it possible to recover my minutes?

  Sorry, but no. If you use Notepad, WordPad, Word, or a program, if you want to build something of length, after start click on file | Save under Save somewhere continue typing and after each few lines or a paragraph, Ctrl + S will save the new content. If something like this happens, you lose only what was typed after the last Ctrl + S.