Erratic optical mouse is by default at the bottom of the screen

Similar Questions

• My Microsoft Wireless Optical Mouse does not communicate with the Transceiver.

  After the return from a road trip, I plugged my Miccrosoft wireless optical mouse and keyboard. At first, communicate with my Toshiba Satellite laptop, but the keyboard now works. The mouse works sporadically if I push the reset button on the Transceiver and he travels the three lights. When I check the State of the mouse, it shows good batteries (I replaced the still) and the right signal. The computer apparently see the mouse, but somehow the orders do not get through the ARVA. Any ideas?

  Hi Peter,.

  What is the model number of the Microsoft Wireless Optical mouse?

  I suggest you try to connect the transceiver to another port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  You can access the links below and follow the steps described in section troubleshooting problem mouse Microsoft Wireless on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/321122/en-us

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse icon moves firmly around the screen

  Original title: floating freely icon mouse?

  When you move the icon on the screen, it does not move firmly/precisely...feels almost as another hand is control.

  Hi Claire,

  Thanks for posting your query in Microsoft Community.

  In order to help you better, please provide us with the following information:

  1. Using a wired or wireless mouse or a touchpad?
  2. Using a laptop or desktop?
  3. Check the behavior by plugging another mouse.

  According the description, I understand that the mouse icon is not mobile firmly across the screen. I suggest methods and check them off below if it helps:

  1. check your mouse for dirt or debris if you use a wired mouse. To check debris, flip the mouse and twist the casing around the ball. It should run free, allowing you to remove it. Check the mouse cover and the area around the compartment of mice for the forests of dust that can keep the ball from rolling freely.

  2. determine if a recent update is causing your mouse drifting on a laptop. Click on the "Start" menu and open the "Control Panel". Click on "System and Maintenance" and then click "Backup and Restore Center." Select a restore point and to reinstall updates one by one to determine what update causes your cursor problem.

  3. disconnect your mouse if you use a cable one and make sure that your USB port is free of debris. Plug the mouse back and if the problem is resolved.

  4 update your device driver by right-clicking on "My computer", then clicking on "Properties" and then clicking on the tab "Hardware" "Device Manager." Find your mouse driver, right click and select "update driver software".

  I suggest you to refer the below link and try to change the mouse settings and check:

  http://Windows.Microsoft.com/en-us/Windows/change-mouse-settings#1TC=Windows-7

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Return with the required information, so that we can help you resolve the issue.
  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• How to change the Setup program so that the system will not default to the screen after an hour?

  I want to leave my computer and do not have to sign in every time I want to use it.  Thank you

  Hi Joy,.

  I suggest you to uncheck the "On Resume, the logon screen" option in the properties of the screen saver and then check if it helps.

  You can see: , Activate or disable the screen saver

   

• new install of Win/10, Photoshop CS2 the CS5 upgrade then give by default on the screen

  I just opened my new ASUS desktop with monitor Dell monitor S2340M, downloaded windows 10 top, then I installed 5 Lightroom Photoshop CS2, then the CS5 upgrade. When installing CS2 was completed, a window popped up. The 'Dell S2340M, D65 color profile' monitor profile appears defective please return your monitor calibration software. Is this a problem with the software Dell or Photoshop? I've tried to talk with the support of Dell Tec but was cut by my appeal to the India.

  Thank you

  Ed

  No need to install CS2 first before installing the improved CS5.

  Just install CS5, enter your serial number CS5 upgrade, and then enter the serial number CS2 as a product calling.

• Microsoft comfort optical mouse 1000 not recognized Vista

  my vista computer does not recognize the new comfort optical mouse 1000

  Here are the instructions on how to install the mouse and software required: http://support.microsoft.com/kb/258785.

  Here are troubleshooting guidelines for the mouse that can help solve the problem:http://support.microsoft.com/kb/321122.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OFFSET of mouse as _ any when the computer is something in the background. User/Windows interface, all, staggered as I use windows 3.1.

  Hello

  I'm really bothered by the fact that my trolling as _ mouse in Windows 7 any time of installation is done in the background, is opening a program or anything like that.  It seems to me as being the fact that we are not in 1995 over this issue should not occur.  How the _ did I have 8 GB of ram and a quad core i5-750 processor and my machine mouse is trolling as _ in these situations?

  I use a logitech optical mouse wireless.  I reinstalled the drivers and software for this 3 times.  Also, I moved the USB connector on the front of my Dell machine.  Still no difference.  Help, please!  I love Windows 7 so far, but the functionality of a mouse I do experience is unacceptable!

  Justin Hansen-

  Software engineer

  You might consider replacing the battery in the mouse?  Or, try not to use any driver module and the software - just plug it in and use it.  It work?

  What if you start in safe mode, or with a boot or a boot device - have you noticed the behavior then?

• Why my mouse pointer scrolls off the screen to the right

  Installed a wireless network adapter by using what I think was the wrong driver. Cannot remove properly. At the time my mouse and Window Media Player begins to act. The mouse pointer goes way off the screen to the right and no other borders. Window Media Player opens wider than my screen. That is what it is?

  Hello

  · What is the number and the model of the computer?

  · Have you installed the drivers on the manufacturer's Web site?

  · Do you receive an error message or error code when you try to uninstall the drivers?

  Use the back to roll on the computer that will replace the network to the previous state driver and check if the problem persists: how to use Roll Back Driver Windows XP: http://support.microsoft.com/kb/283657

  I suggest contacting the manufacturer and then install the wireless network card drivers.

• Why won't my keyboard output to the screen?

  Suddenly, the performance of my mouse and keyboard has become very erratic.  Output is not displayed on the screen and the cursor does not move as expected and wait.  The last time this happened it was because of an update from Microsoft which needed to be removed.  This is another new facility and it is probably the same, but of course I don't have a note.  Help!

  Hello

  1. What is the brand and model of your keyboard?
  2. what operating system do you use?

  Check the operating system you are running on the computer by following the steps in the article below.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  In addition, check the updates have been installed by following the steps from the link below.
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Please provide us with some information so that we can help you solve the problem.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Lose the Microsoft optical mouse settings

  Whenever I have reset my computer my mouse wheel to reset to 15 lines/click. I can't imagine that so many users want so high that it become the default, but what I can do to get the system of remember I want the value 1?

  It's a Microsoft Optical mouse.  In addition, a person will have to tell me how to learn more on this subject.  (Yes, I'm clicking on apply and exit properly...)

  I swapped the Microsoft mouse for some orphan one from the bottom of a pile of parts.
  It works very well.

  I am also very happy to get rid of the incredibly bad design from a mouse that has button fronts that record a click when it comes in contact with a corner of the keyboard.

• Microsoft will make the D67 - 00001 Microsoft Trackball Optical Mouse ever?

  I went to buy a new one and just discovered, it is no longer made... This is the best mouse I've ever used. Everyone else is doing with the trackball of thumb?

  I did not use a conventional mouse shaped move-your-hand-across old style in several years and the another model of mouse tractball, I simply do not like. I REALLY enjoy Ashley style thumb trackball mouse, it leaves my fingers free to click the mouse buttons and I can easily turn and rotate in the game without having to move my hand at all.

  If I can't get more or if anyone makes them I want Microsoft to know that there are customers on here for them and that if they want to sell more of them, then I think that everything they really need to do is to advertise and make them available. It's the most comfortable mouse that I have ever owned, and there was a very short learning curve for her. I tried other mice with the trackball at hand, and I don't like them at all.

  Hello

  What is the problem you are having with your D67-00001 Microsoft Trackball Optical Mouse?

  I'm sorry to inform him that the product you are looking for is more in production and is not available for sale on the online Microsoft store.

  I would suggest that you use your favorite search engine to find a mouse with the same characteristics using keywords among other manufacturers of computer accessories Trackball Mouse-mouse ball of thumb track.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps.

• Impossible to use the Microsoft Optical Mouse right click features

  Original title: my microsoft optical mouse: right-click did alow all functions? He did that all the time I had to make the decision to link msn/century.

  I now have to Cntl C allows you to copy

  Hi SallyAndrew,

  Thanks for asking this question to Microsoft Community!

  I understand that you can not use the right-click on the optical mouse. I'm sorry for the inconvenience caused to you. Don't worry; We got some troubleshooting methods in order to get this fixed number.

  He would be grateful if you could answer these questions as well.

  1. What is the number of exact model of the mouse?

  2 is the issue limited to a particular application?

  3. did you of recent changes to the computer before the show?

  4. what version of Windows operating system is installed on the computer?

  I suggest to perform the steps in the following article and check if it helps.

  Method 1: Fix a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Method 2: Troubleshoot failures in the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Optical mouse HP changed the settings to do a right-click instead of left-clicking to open a program.

  Original title: optical mouse 2.4 ghz hp

  My HP 2.4 GHz wireless optical mouse has suddenly decided to swap the functions of the right and left clicks so that, for example, I do a right click on a program to open it instead of left-click as usual. anyone knows how I can get back to normal please.

  Hello

  1. What is the version of the Windows operating system?

  2. What is the model of your HP wireless optical mouse?

  3. did you last changes before this show?

  4 when was the last time it was working fine?

  Method 1:

  The problems with the mouse button or scroll the parameters: http://support.microsoft.com/kb/303091

  Method 2:

  Step 1:

  Change the settings of the mouse for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Step 2:

  Change the settings of the mouse for Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  Step 3:

  Change your settings of the mouse for Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-mouse-settings

  I hope this helps.

• I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  Hello

  The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
  his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
  supported.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Logitech Optical Mouse "Wheel" can not be configured to scroll by rotating the wheel.

  Universal scrolling and automatic scrolling are the only choices in the menu. Windows XP Edition version family. Optical mouse on the PS/2 port. What needs to be done to configure the mouse so that the wheel can be made to scroll by turning?

  What to do and mouse model is? Have you downloaded and installed the driver and software from the manufacturer for it?

  SC Tom