Erratic results, looking for comments

Similar Questions

• I'm looking for comments about the advantages and disadvantages of vs Windows 2000 Windows Server 2008.

  Hello

  My company uses Windows 2000 Server for a job very very important. I want to convince them to upgrade the server to Windows Server 2008 operating system and they asked me to give them some reasons, so I want to know Windows 2000 Security and performance issues and the benefits of Windows 2008 in detail to carry out the task. Please tell me where I can find this information. ? Thank you
  original title: Windows 2000 VS Windows 2008

  Please repost your request in one of the s in Forum Windows Serverappropriate, thank you!

• Computer repeat it is looking for updates, but no results me

  Original title: Windows updates

  I had my disabled Windows updates but now want to catch up on what I missed. I use the feature "Check for Updates" in the control panel and my computer telling me it is looking for updates but doesn't give me any results. What can I do?

  It is a step upward if she began the search. Make sure you also have KB3109094, KB3087039 and KB3078601 installed. Then try again.

  Best regards, VZ

• Looking for a SQL query to retrieve callvariables + ECC to a RESULTS of SCRIPT EXECUTE (translation VRUS)

  Hi team,

  I'm looking for a SQL query check data (ECC + CallVariable) due to a RESULT of SCRIPT EXECUTE when you ask an external VRU with a translation route to VRU with a 'run external Script '.

  In my view, that the data are analyzed between the termination call detail + termination call Variable.

  If you have already such a SQL query I would be very grateful to have.

  Thanks and greetings

  Nick

  Omar,

  respectfully, shorten the interval of a day might not be an option for a history report ;-)

  I recommend to take a look at the following SQL query:

  DECLARE @dateFrom DATETIME, @dateTo DATETIME

  SET @dateFrom = ' 2014-01-24 00:00:00 '

  SET @dateTo = ' 2014-01-25 00:00:00 '

  SELECT

  TCV. DateTime,

  TCD. RecoveryKey,

  TCD. RouterCallKeyDay,

  TCD. RouterCallKey,

  VME. EnterpriseName AS [ECVEnterpriseName],

  TCV. ArrayIndex,

  TCV. ECCValue

  OF Termination_Call_Variable tcv

  JOIN THE

  (SELECT RouterCallKeyDay, RouterCallKey, RecoveryKey IN Termination_Call_Detail WHERE DateTime > @dateFrom AND DateTime)< @dateto)="">

  THE tcv. TCDRecoveryKey = tcd. RecoveryKey

  LEFT OUTER JOIN Expanded_Call_Variable VME ON tcv. ExpandedCallVariableID = VME. ExpandedCallVariableID

  WHERE the tcv. DateTime > @dateFrom AND tcv. DateTime<>

  With variables, you can set up your code (for example, you could write SET @dateFrom =? and let the calling application to fill in the DateTime for you).

  In addition, join two large tables with all the lines, as you did (TCD - TCV) is never a good option.

  Another aspect to consider: all the ECC is actually arrays (always), is not good to leave aside the index value (tcv. ArrayIndex).

  G.

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• Looking for examples of customized with folder KD with paged results search

  Hello
  
  I'm looking into writing a portlet that is customized for the search for one or more specified folders of knowledge (Community preferences) directory and display the results, "inline", in a table with pagination. This seems to be a fairly common thing to want to do; and snapshot of search doesn't have the ability to customize the results of how I would like to display.
  
  It would be fantastic if someone has a code that they were willing to share who does that canned; but I'm really looking for a good example to get results of research via the API (.net) and link these results to a grid to display.
  
  Any help is appreciated.
  
  -tomS.

  Hey Tom, shoot me an email and I can send you our code for this canned as well as screenshots and explanations of how it works.
  And Yes, its to .NET and works very well in 6.0 - 6.1mp1, have not yet tested in 6.5.

  [email protected]

• Computer notebook Synaptics trackad pointer moves on its own-Looking for solution

  I recently bought a new laptop Hp M6 - N010dx, and the trackpad Envy Touchsmart is already in place.
  I installed the latest drivers for my pc, upgrade to 8.1 windows and twisted the sensitivity of the mouse, but I always have problems.

  Sometimes the pointer will become difficult to move on the screen and then will move its own. Again, to move its own, as in, I'm not in contact with the laptop at all. It's very frustrating.
  I can temporarily fix the problem or reboot my laptop or by writ put to sleep and then wake up again. However, I am looking for a permanent solution.

  Any ideas?

  I decided to return the laptop to bestbuy. I found that many users have had this same problem with the same model laptop and no "solution" offered actually work (I even tried myself without result). It's really a shame because I liked this laptop apart from faulty equipment... I am considering getting the x 360, but he mixed comments as well.
  This may end up being my last HP laptop that really, really bothers me because they are beautiful and affordable pcs

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• Problems with three fingers looking for preview

  Hi all

  So I've upgraded to Mac OS Sierra the other night and it was absolutely great so far. However, there is a feature I noticed is either absent, either turned somewhere off the coast, and it is three fingers look upward in the preview. I'm at school and do a lot of my reading on a PDF in preview, and yes I just came across a few words that I don't know the definitions to. In the past, three fingers look has been one of the best features for its quick access to definitions. This is something I really miss and hope that it will be always possible somehow.

  Now, I noticed that it only worked in other applications as well, I went to settings and looked for the feature. I was able to find it in the settings of the Trackpad and he turned his back. That seems to have worked for just about every other app except Preview. If anyone has solutions to this problem, I'm all ears!

  Thanks in advance guys!

  It works for me in preview. However, it took several 3 finger taps to finally get the context menu with 'Look Up' inside to provide the result below.

  

• Looking for HDD recommendation

  I have a Macbook late 2007 and its HARD disk is dead. I'm looking for help with if you guys can suggest me a brand of HARD drive I can use on the inside. I saw ifixit.com and she a Toshiba 500 GB 2.5 MQ01ABF050. Hard drives as recommended. Is there another model?

  I've seen a few different brand of Toshiba drive HARD internal as MQ01ABD050, would that work?

  Help, please.

  This depends on how much storage you need.  You can spend with a HARD drive classic if you need a lot of storage up to 1 TB, or if you want you can go with an SSD of speed. You can get a HARD drive of 1 TB for what it can cost to buy a 250 GB SSD.  You can get the SSD more great but costs as much as your computer is interesting.

  If you are interested in an SSD is a good starting point: https://eshop.macsales.com/shop/ssd/owc you do not have to buy from them, but it will tell you everything that is involved with the installation of an SSD.

  For a HARD disk, I went with a Hitachi model in my MacBook.  I read reviews of web on sites like Amazon when purchasing technology (keeping in mind the people who do not have problems with a model are less likely to view only those who do and deserves to be done reading the negative comments to see if their complaint is justified), so any model will have some negative reviews.  For portable players with the ability, I wanted THAT HGST seemed to have the best odds.

  If you go for a HARD drive one other thing to consider is the rotation speed. Your old computer has a drive 5400 RPM in there. This consumes less energy and work more cost but, making it slower.  If you do not have to be also considering the battery life or temperature, you could install a 7200 RPM drive.

• I am looking for an email that was trashed and does not appear in the special research.

  Or search boxes or the filter I would look for an e-mail that was sent to the trash, I am trying to include them in the search. Is it possible to include the trash in special research?

  Try this, if you know that the email has been deleted. If it is not visible, select the quick filter toolbar.
  "View' > 'toolbars' > select" quick filter Bar'"

  Select the folder "deleted" / "Trash."
  Type a word in the search for quick filter which is likely to refer to what you are looking for.
  use the "filter messages by: to change the results."

• You are looking for an extension in order to reduce the size of the image

  I often need to reduce the size of the screenshots. Looking for an extension that would allow me to do this in Photos, without the need to export, and then import them back. It's a simple task, but I could not find a way to solve this problem. There are many applications with extensions that allow cropping images, but the apps/extensions similarly dedicated screenshot cannot reduce the size.

  The feature I need, it's essentially the only preview offers under the menu set the size as a percentage or in pixels change. Special bonus for an app/extension that would work also on the pictures for iOS.

  
  

  
  

  This is not possible - you can never make any change to the contents of the library - the only way to reduce the size of the image is by exporting using different size options in the window export

  You can use a preview an external editor with external publishers for extension of pictures - I have no idea of what would be the results with that

  LN

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• redirect when you are looking for a search site

  I had a problem with NickJr.com/kids and flashplayer not pluging in Firefox, so I decided to get rid of all this. I uninstalled Flash Player, I saved my mozilla profile and then uninstalled firefox and personal setting completely. Now when I do a search on google for 'nick' find NickJr.com/kids it loads the results and then redirects immediately and asked if I was looking for my ID google? I look for something else in the world, but the word nickname?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked