error 0x000000c1 with a canon lbp 6300dn printer and Vista Home Premium

Similar Questions

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• I have XP Home and Vista Home premium desktop computers. I can't print using a limited account and I can't share printer

  I have XP Home and Vista Home premium which are interconnected desktop computers. they have only two accounts.

  I am not able to get ashare a printer, or and I can print if I type something from the administrator account on the computer connected directly to the printer, I can't print using the account of this same computer - only on behalf of the administrator.

  I can't print at all using the Vista computer.  Is to show that they are networked - is do not know maybe it's that the XP needs a NETWORK map?

  I have two accounts, one is an administrator on a computer and the other is one Director on the other.  Help, please.

  There is a router.

  Hello

  Follow these methods and check if that helps:

  Method 1:

   

  Make sure discovery network and printer sharing are on by following the steps in the article:

   

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 2:

  You can also download from this link and check if it help you.

  Troubleshooting File and Printer Sharing in Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?ID=744

• Problem with the Canon LBP 1120 printer installation driver

  Hello

  I have a machine running 64-bit vista Home premium. and I have a Canon LBP-1120 printer. This printer is in good shape and I don't want to buy another printer.
  But the problem is that the only driver that there is, is for Vista 32 bit. And when I try to install, I get the error message saying that I need 64-bit drivers.
  I'll be happy even with basic print function because I do not do more printing.
  Looked everywhere on the web... good .no
  A workaround solution would help me a LOT!
   
  I found this, but the link does not work
  [Quote]
  Hello

  There should be a Vista driver for it that will at least at the base
  print function, although it does support all of the features:
  https://winqual.Microsoft.com/hcl/PR...P-1120&OID=191

  [/ Quote]
  Hello
   
  1. are you able to print successfully?

  3. What were the recent hardware changes performed on the computer before the question software ro?
   
  A Windows Vista 64 Bit operating system is compatible in installation of 32-bit drivers. All the 64-bit version operating systems have the ability to run 32-bit applications, but on a version 32-bit operating system, you are limited to only 32-bit software.
   
  According to the information on the website of Canon, Canon provides only the 32-bit drivers for Canon LBP 1120 printer, 64-bit drivers are always expected. To improve assistance to the topic to download driver 64 bit I ask you to contact Canon.
   
  http://www.USA.Canon.com/Cusa/support
   
  Canon LBP 1120 32 Bit drivers
  
  http://software.Canon-Europe.com/products/0000524.asp
   
  For problems with the installation of the printer drivers 32-bit in a 64-bit Vista system, you can go through the resources in the following article and see if it helps:
   
  Error message when you try to add a printer driver 32-bit on a 64-bit print server: "the folder you specified contains a compatible software driver for your device.

  http://support.Microsoft.com/kb/979385

  Please see the link for more information about the issue mentioned.

  Installing the driver for 32-bit and 64-bit platforms

  
  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463027.aspx
  

  
  

  I hope this helps.

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I tried twice to install the KB2754670 update every time install failed with the error code 646 can help? I have Windows Vista Home Premium edition

  Update Windows cannot install KB2754670 twice showed error code 646. Can someone help? I am running Windows Vista Home Premium edition.

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  UTC/GMT is 01:26 Sunday, October 21, 2012

• Cannot share my printer on VISTA Home Premium

  Hello... I configured a Brother printer as a local printer on my computer VISTA Home Premiun (latest printer drivers) and you want to share with the other computer on the network running Windows XP Professional.

  I tried to turn on the sharing of printers in sharing and discovery in Network Center and sharing.  However, every time that I click on the button apply the function remains off.  The network is private.  Working groups are the same.  Using Norton 360 version 3 as the firewall.  I tried adjusting the parameters of traffic in the Firewall Norton for Windows file sharing get through, no difference.  I uninstalled the Norton 360 using the Norton removal tool and tried with no firewall turned on... no luck.

  Also, I tried to turn on Public folder sharing in the same area.  I get an error dialog that says "incorrect function".

  Help, please.  Research on the web (including the site of Norton) gave no response or things to try.

  Thank you. Just like a book four of the liver in a ladle of pint.

  Yes.  I finally got mine works too.  After uninstalling Norton 360 with the Norton Removal Tool and restart a coupla times.  It still does not work.  Then...  I reinstalled VISTA Home Premium.  It's a horrible work-around because you lose all your customizations (mine are about 7 years), but the installer moved all my programs and desktop in a Windows old folder files, so I'm keeping them.

  I need to reinstall literally everything whole again, but this crazy printer sharing button finally lit.

  Thank you Aaron.  Good luck to you.

  Ramone

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

  Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

  I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

  I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

  Here's what I know:
  -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
  -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
  -I am running Trend Micro Internet Security 2009, but I turned it off.
  -Windows Firewall is also disabled.
  -I can print via the wireless router if the laptop is connected directly to the router.
  -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

  I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

  Hello

  My suggestion would be to update the firmware on the router and wireless adapter first.

  Go through the following article. It can help you
  http://support.Microsoft.com/kb/314073

• Printer HP Vista Home Premium driver

  I have an old HP color laserjet 5 m and need a driver for Vista Home Premium?

  Hello

  HP provides the drivers for their products non-microsoft

  HP link here where you will find drivers if available

  http://WWW8.HP.com/us/en/support-drivers.html

  If there is no printer vista drivers you will need to upgrade the printer

• C00D0FF4 error message when you try to share the media in the Player Windows Media Player 11 and Vista Home Premium SP2 64-bit

  Hello
  I can't share my media using WMP 11.  When I try to do, opens a window of options asking how I want to share media files (with xbox, other users, etc.), and I select the options and click OK.  Then, when I return in the sharing of multimedia files to see if the media are indeed shared, a window opens informing me "Media sharing has been disabled because a required Windows setting or component has been changed. For any additional help, click Help on the Web. When I click Web help, the error code above, with a few troubshooting not.  You must ensure that Windows Media Player Network Sharing Service is turned on.  However, when I get to the list of Services, WMP Network Sharing is not.  It is also a step to confirm the ownership of a registry subkey.  When I try to access the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID], however, there is no security ID subkey.  Instead of that, by virtue of the MCH, there is a list of "default (name), REG_SZ (type) and not the value (data)".

  Suggestions about how to fix this would be greatly appreciated.  Would it be useful to simply uninstall WMP and start over?  If so, how to do that?  I saw an obvious way to do it.

  Thanks a lot for your suggestions.

  Bill Cowan

  Hi Bill Cowan,.

  Thank you for using Microsoft answers.

  Follow the instructions in the link below that may help you resolve the issue.

  Method 1:

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D0FF4&ContextId=233&OriginalID=C00D0FF4

  Method 2:

  Let us try to disable antivirus and check whether the problem is resolved.
  Reactivate the antivirus after checking the issue.
   
  Let us try to disable the third-party firewall and see if the problem is resolved.
  Re-enable the firewall after checking the issue.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• (0x80070005) error on my dell Telechareger (studio xps 435mt) windows vista Home premium. Windows cannot access the specified device, path or file. I can't have the appropriate authorization to access

  Don't leave me in what in folders and files (c). IM locked it says that I may have not permission to 20 c to access. Thank you

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  Check the link and see if it helps:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  The article also applies to the Windows Vista operating system.

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Check out the links and check if that helps:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

• I get error 800800005 when I try to update windows. Vista Home Premium 32 Bit SP2

  I get error 800800005 when I try to update windows.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• I got error code490 when I instal windows update to windows vista Home premium

  490 code

  Hi jas38000,

  A what you try to download the update from the Windows Update Web site or Windows Vista?

  Here are some links that might help you.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Try to reset the Windows Update components. Click on the Fix Me to reset to be done immediately.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/KB971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install the updates that are currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Hope this information helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think