Cannot share my printer on VISTA Home Premium

Similar Questions

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

  Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

  I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

  I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

  Here's what I know:
  -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
  -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
  -I am running Trend Micro Internet Security 2009, but I turned it off.
  -Windows Firewall is also disabled.
  -I can print via the wireless router if the laptop is connected directly to the router.
  -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

  I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

  Hello

  My suggestion would be to update the firmware on the router and wireless adapter first.

  Go through the following article. It can help you
  http://support.Microsoft.com/kb/314073

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• error 0x000000c1 with a canon lbp 6300dn printer and Vista Home Premium

  I have a Vista Home Premium that I try to install a canon lbp 6300dn printer on a network.  It gives me the error 0x000000c1. I got the correct driver of canon but continue to get this error? can you help me?

  It is an unrecoverable Windows, usually called error message Stop, bug verification, or more commonly the blue screen of death (BSoD).  Not a Setup error.

  You can try to install over the previous installation.

  If you can get the system for more than a few minutes or you can use safe mode, try to delete the last installed application software or driver.
   
  For the withdrawal of an application:
  1. click on start, Panel, then programs and features.
  2 Select the software associated with the printer, and select uninstall.
   
  To uninstall the driver:
  1. go into the Device Manager
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  2. find the printer driver, do a right click Uninstall.
  3. also in the Control Panel, printers, right-click on the printer and click on delete.

  Now try to install your printer with the latest drivers available on the Support site of the manufacturer.
  http://www.USA.Canon.com/Cusa/support

  Your Type of product: consumer Home & Office
  Family of products: Printers & Multifunction
  Series of products: image CLASS series

  See also these:
  Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560183 (v = vs. 85) .aspx

  SPECIAL_POOL_DETECTED_MEMORY...
  STOP: 0X000000C1
  http://www.faultwire.com/solutions-fatal_error/SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION-0x000000C1-* 1194.html? = date order

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Printer HP Vista Home Premium driver

  I have an old HP color laserjet 5 m and need a driver for Vista Home Premium?

  Hello

  HP provides the drivers for their products non-microsoft

  HP link here where you will find drivers if available

  http://WWW8.HP.com/us/en/support-drivers.html

  If there is no printer vista drivers you will need to upgrade the printer

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• Cannot install Update 938371 on Vista Home Premium because of the error 800b0100.

  Using Windows Update and stand-alone update, I can't install the Update 938371 (which I believe is a sine qua non for SP1) on my Vista Home Premium laptop.

  When I try to do, I get an error 800b0100. I tried the system preparation tool, I even tried the fix XP (for re-registration of dll), but doesn't seem to work.

  My laptop is an Asus G2 with 3 GB of RAM and an Intel Core 2 Duo T9300 processor (both at 2.5 GHz), if this can help.

  Thanks in advance for your advice.

  Hi AVARiCE91,

  Welcome to the Microsoft Answers community.

  This is a reprint of this update. The republished version includes performance improvements and additional reliability that apply to the Windows Vista-based systems and Windows Vista Service Pack 1-based.
  For more information visit http://support.microsoft.com/kb/938371
   
  Try these one by one and check below:

  Method 1: Reset windows update components.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Method 2:
  
  I suggest you to temporary disable firewall and security programs. Then try to install the update in clean boot mode.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to switch to clean boot on a computer.

  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, now try to install the update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  For more information visit:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Windows update error ox80070020, cannot install power shell update vista Home premium

  Windows vista Home premium, windows update to PowerShell will not be installed via updater. I use microsoft security databases.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try the following Microsoft article and check if it helps.

  Method 1:

  Run the fixit in the following Microsoft Fixit article and check if it works.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Try the steps in the Microsoft article and check following.

  You receive the error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates: http://support.microsoft.com/kb/883825

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  Hope the information is useful.

• Cannot obtain replacement disks of Vista Home Premium.

  I have a PC that came with a set of disks in the OS (Vista Home Premium) of the desktop type the Gateway FX. Technical support Gateway wants to load more that a new license cost complete and me have to wait a month to get them. Seeing as how I've already paid for the license, it's completely unfair. Can I get a disk of Microsoft (or anyone), if I have my license key? I understand that I must pay a nominal price for the physical disks.

  Thanks in advance,

  Mikey

  Hello

  If it never came with disk recovery, gateway must provide you with another way to reinstall the operating system.

  If they didn't they break their agreement with Microsoft.

  Here is the information on the bridge to access the recovery Partition on your hard disk to reinstall Vista:

  "Full factory recovery"

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  ""Software Information " "

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  There is no Windows Vista downloads available from Microsoft.

  If the above does not work, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• Cannot restore backup successful - 0x8007007A Vista Home Premium error code

  I use Vista Home Premium that came with my laptop. I had a nightmare with my Dell Inspiron for the last two months. I finally gave up and decided to do a clean install, after completing a successful using the Vista Backup Backup Assistant. Now, here's the problem. I reinstalled Vista, and made sure I had all the Windows updates available. Now I want to restore my data from my removable hard drive files.

  I click on the Control Panel, system and maintenance, restore the backup files, Advanced Restore and select my removable hard drive (which is cool). Then, I get the following error message:

  "There was an unexpected error. The data area passed to a system call is too small. (0x8007007A).

  I tried to copy the backup file on my computer and going through the same process, but I get the same result.

  I'm at my wits end with this, I can see all the files on my portable hard drive so I know something is there, it's just Vista backup restore will not do its job.

  Help, please!

  First, disable any security software you have running on your system.

  Then connect the external drive and go to start / Control Panel / Adminiistrative tools / computer Managmernet / Disk Managment and change the drive the drive letter of bacckup (I don't know why, but I saw an answer where this atually worked so it's worth a try).

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.  More than finding the cause, I want to eliminate anything that might interfere with the process.  Try the restore in clean mode to see if the tht works.  Don't forget to return the system to normal when done regardless of the result.

  There is not much on this error code and absolutely nothing of a value - only valid suggestion posted above.

  Here is some general information that can help (although unrelated to this particular error)) but it may be useful to solve the problem as a whole.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup ("Yes... even if he said that the backup location is not available ' )

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer with Vista Home Premium problems

  I'm having a terrible time getting my HP printer to work.  My daughter has disassembled the computer and back together.  Both have been done with my permission and supervision, BTW.  Connect the power supply of all equipment is fine, startup is very well, everything seems to work fine except my HP printer. He has not worked since the computer was disassembled and put back together.  Uninstalling and reinstalling both get hung up and won't be finished.  My HP printer will a the printer section in Device Manager.

  HP told me to do all sorts of things, but none solves the problem.  I have disabled firewall during installation.  I disconnected my cable internet connection during the installation.  I had to delete some registry files that will not remove during uninstall.

  I'm so frustrated that I took out an old Lexmark printer that will not install correctly.  The Lexmark printer for some reason any settles in the Device Manager in the section "other devices" with a question mark and will not create a section of the printer.  Then of course, it is not the printer.  There must be something else in Vista that I'm missing that prevents a correct installation.

  The first day, I bought my HP printer, a 6310 all-in-one, my printer installed and worked fine.  Just did not work since my daughter put our computer together.

  Our Hitachi DVD-rom will not quite work, either.  The music can be played, CDs and DVDs can be played, but burning does not work.

  Any help would be appreciated.

  Thank you

  Patty

  Hi again Patty,

  I have a few questions for you.  You said "Everything in the file zip, except the pilot, moved."  When you double-click on the zip file, an installation routine starts then, or is it just unzip the files somewhere?  If you look at these files, do you see any facility named, or any executable?  If so, double click on setup to start the installation.  If this is not the case when you are installing the printer via the Control Panel, select 'have disk', then access the dirctory files are uncompressed in and who should install the driver.

  You mentioned that you did a restore of the system, but can return only 10 days.  Never has that take you back to this problem before?  For more than two weeks we last talk.

  Updates can be removed through the Control Panel, programs, programs and features, view the updates installed (left).  Unless you're of course update you want to delete, I wouldn't get rid of them at random.

  You can consider a reinstall of Windows Vista.  If the method above does not receive your printer doesn't work, then something is wrong or damaged.  The fact that this all started when you took the lid of the machine has always wonder if we also have a hardware problem. Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• Windows cannot check the updates. Vista Home Premium.

  I get the message "windows cannot check for updates error Code 80080005 code. Can someone tell me how to solve this problem?  Thanks in advance

  ---