Filas system restore with error 0x8007045D i/o device

Similar Questions

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Files could not be copied into a WD My Passport External Drive because of an error 0x8007045D i/o device

  I tried to copy files from my hard drive into an external Western Digital My Passport drive. But, as I was watching the progress of the copy of the files, I noticed that only four files have been copied to the external. A large majority of the files could not be saved due to an error 0x8007045D i/o device. I noticed it's the same error I get when I shut down my computer (in this case it is said error of breakpoint or something). Drag / drop files did not work. Still later, my USB key no longer works.  I tried to check my hard disk for errors, but my camera came out clear.

  I use Windows 7 Professional 32 - bit, E5800 Pentium Dual Core and an Asus motherboard.

  How can I get rid of this error because I need to transfer my files specifically in the external hard drive?

  Help, please. I'm not very tech savvy so simple instructions the better.

  Hi @roryheadmav!

  You can try the basic steps in such cases troubleshooting - first try to connect the hard drive to an another USB port of the computer and if possible with another USB cable.

  I hope that you will be able to transfer all the data you have, but in case it does not work, you can also boot into safe mode and try to copy the same and see if you can successfully complete the copy error-free operation. You can follow this article that describes how to enter Safe Mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this helps and let me know how it went.

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Shadow Copy Provider cannot create system restore point error Ox8004230F?

  When I try to create a system restore on my Vista operating system, you get the above error message.
  I have entered what has been suggested in the forums and Services.
  What should I do now?
  Thanks for you help.

  When researching other forums via Google, I found this in 'My Digital Life '.  It solved my problem so I post here to help people who may have tried all the "fix - its" that did not work!

  "The error occurs because the Microsoft Software Shadow Copy Provider service is stopped or disabled. The Microsoft Software Shadow Copy Provider Service manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, as when you manually disable the snapshot, all services that explicitly depend on it will fail to start. "

  The Shadow Copy Provider MS and the shadow copy of Volume must be enabled.  With my problem I'm not far enough to allow the Shadow Copy Provider MS.  When I did, it has allowed me to create a restore point.

  Thank you.

• used to open system restore reads error toggle one or more readers

  problems with the system running trying to run the system restore may depend on the restoration

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

  Hope this information is useful.

• Cannto run System Restore: 0x8000ffff error code

  Original title: error 0x8000ffff trouble code

  System Restore tried and couldn't make any changes due to the error 0x8000ffff, t please help-Bill

  Which antivirus product is installed? You will have problems if it is Norton!

• 'Messages' files fill with errors of newspapers ATAPI devices...

  Hi all

  There is a strange problem, whereby the 'messages' log files are filled with the following error:

  kernel: peripheral ATAPI had:

  kernel: error: illegal request-(Sense key = 0 x 05)

  kernel: cannot read medium - incompatible format--(asc = 0 x 30, ascq = 0 x 02)

  kernel: the package command 'Read a subchannel' failure was: kernel: "42 02 40 01 00 00 00 00 10 00 00 00".

  "

  kernel: had: packet command error: status = {0 x 51

  DriveReady SeekComplete error}

  kernel: had: package

  command error: error = 0 x 54

  After reviewing the matter, it seems to be down to the fact that a CD-ROM (a custom Windows 2000 Setup CD) was left in the DVD drive of the machine. This CD-ROM has been used successfully to create multiple virtual machines.

  If the CD-ROM is removed, the question goes, but of course, this isn't exactly a permanent solution...

  I've searched the forums and the internet and this issue seems to happen on different platforms. However, all the messages that I can find on the subject with ESX have never been fulfilled!

  Can anyone shed light on what could cause this, as I have no idea!

  Any help is greatly appreciated

  Greg

  Hello

  You have discovered what causes the problem. Leaving CD-ROM in the disc drive.

  Unfortunately there is no solution for ESX v3 except to remove the disc from the tray of the cdrom. There is a reason, that I only use ISO images. Never have this problem.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• System Restore (with backup) for Windows XP how to restore the files from here?

  I saw the other posts for this but they have not answered the question. When I look in the C drive, and open the folder backup (backup C:\My--01/12/23 1134 AM), my photos, videos and documents are not available or are invisisble. When I tried to make hidden files visible, all my desktop icons and all the Start Menu program buttons disappear. I can see the files when I search with a software such as jdiskreport - 1.4.0, but I'm unable to move with this program. When I tried to move them with jdisk... they is locked in the tree of files of jdiskreport. Whenever these trees of missing or file icons has locked, I had to restore to the good previous restore point. In my view, the full restoration of the system (with backup) fails and should be avoided at all costs.

  So, if someone knows a way to access these files, I would appreciate the help of course. And please, no answers don't like "cannot not you just copy and paste?" because it is not currently a solution until the files are visible without erasing my desktop and the Start Menu.

  Hello

  Select the advanced restore options to restore the files. See the steps in the following article.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/restore_overview.mspx?mfr=true