error 0xC004C003 after reinstalling windows 7

Similar Questions

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• error 0xC004C008 after reinstalling windows 7, after changing the mode ide to ahci/uefi

  I used the pack family windows 7 Home premium to install windows on three different machines.

  the copy of the play was purchased in New Zealand and used in the Philippines.

  1 copy:

  laptop Acer 4720, intel core 2 duo 5450 @1. 66 ghz, intel gma x 3100 Windows vista x 86

  Windows 7 Home Edition premium has been installed and activated without errors.

  2nd copy:

  Intel core [email protected], nvidia 9800gt 1 GB ddr3, 1 TB hitachi sata

  Windows 7 Home premium x 64 has been installed and activated without errors.

  3rd copy:

  Intel pentium dual core [email protected], nvidia 9500gt 1 GB ddr2, 500 GB sata hitachi

  Windows 7 Home premium x 64 has been installed and activated without errors

  chart changed to nvidia g210 512 MB ddr3 when nvidia 9500 gt failed with no windows update problem.

  current problem started when I changed my 2nd copy of windows editions Home premium.

  I changed the msahci value 0 registry key:

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\

  downloaded/installed the latest intel ahci driver for intel...

  restarted the computer...

  from the bios changed the ide to ahci mode.

  During his connection, windows is now inactivated "due to material changes.

  automatic activation fails.

  phone (cell) activation fails because "windows is already activated too many times.

  thinking it was just a small problem, I reformatted my drive and reinstalled windows 7 Home premium x 64, but always with the same activation failure.

  How is microsoft activation server not acknowledge that it is always the same machine, the same card/memory/disk hard intel processor/graphics installation?

  License status: initial grace period
  Time remaining: 28920 minute (s) on (20 day (s))

  
  
  You must activate by phone:

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Error invalid after reinstalling windows xp product key

  Re-install Windows xp on the new drive

  my computer compaq laptop has window xp inside and the hard drive is failed.   I have an original cd of window xp; but when to enter the product key, it is not valid.

  How to re-install Windows xp on my laptop with the new hard drive?

  Thank you

  Bonzai

  What kind of CD you used?
  Was it a restore CD provided by the manufacturer or a retail XP CD?

  Is the key that you are using a sticker on the computer or the one included with a purchase XP?

  If you use the key of a sticker on the computer, you need to be sure to use an OEM provided the CD to reinstall.
  The key to the sticker on a computer that says "OEM" will not be able to activate on a Setup from a retail CD.

  Make sure you use the key for the media you used (key OEM and OEM media, etc.).
  Make sure that the key is the same version that you are trying to install (button Home, multimedia, etc.).
  Make sure that you type the key correctly.

• Error activation after reinstalling windows 7

  Hello, I bought my laptop and it had WIN 7 Home premium top. When windows 8 came out, I decided to install and give it a try, I didn't like it very well so I reinstalled win 7. I put in the key that is on the bottom of my laptop on the sticker, and now it says that the copy of windows is not genuine. Please help, I used my key and no one else has it and is not on a different computer.

  Thank you!

  Try to activate by phone as follows:

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• How can you recover files, folders, software and drivers after reinstalling windows xp family?

  original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

  When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

  Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

  On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

  Hi MarkS_02127,

  Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

  I hope this helps.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• After Reinstalling windows 7 stopped opening PSD files.

  After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

  Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

  If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

  (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

  So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

• After reinstalling Windows XP I get errors saying ' cannot read memory: 0x7e4195cb'.

  Recvd the blue screen of death on my desktop dell (3rd time), could not function in safe mode. Reinstalled Windows XP, put in the product code to be reactivated, obviously could not get to the internet for activation. now get error msg can't read the memory at 0x7e4195cb, click on Cancel to debug, getting same msg of error with different location? I probably wiped out the recovery with the installation of new partition... any help?

  original title: BSOD with new installation

  I hope that you also didn't erase the utility partition. Press F12 immediately after startup to see if she's still there and you can enter. Sure looks like one of your hardware components is bad!

• Activation error: 0xC004C003 after upgrade to Windows 10 8.1

  Last September, I bought this computer, it is Toshiba Satellite L50-A-19N, he was originally Windows 8, I've updated for Windows 8.1 and it enabled all the time until the upgrade of Windows 10, now it shows "error code: 0xC004C003" which means that the key is not valid.
  "Connect to the internet to activate windows.

  

  Change product key button does not work, the settings window just freezes and I have to close it using the Manager tasks.

  I found the original key using this script, it's quite different key that is displayed in settings > Privacy page
  http://pastebin.com/THmGQcgk
  

  Running this command

  slmgr-IPK MY47H deleted

  This appears when I try to activate using the original key, at least I think it is original because I got using this vbs script

  Activation of Windows (r), Core edition (2b1f36bb-deleted)...
  Error: 0xC004C003 the activation server determined that the specified product key is blocked

  I read that I can somehow contact toshiba or microsoft for the original for my product key, but I can't find any info contact, or live chat, only in this forum, so I ask here

  Microsoft was told to contact TOSHIBA... How can I contact TOSHIBA for the original key? I have the original key, but I want to be sure if that is true.

• Acrobat 9.0 failure reinstall after reinstalling Windows Mobile OS

  I got an error message "failed activation server" on the opening of a reinstall of Acrobat 9.0 of CS4 Web Premium after reinstalling my Windows 7.0 operating system. The full CS4 Web Premium was on my machine, as well as CS6 Production Premium when my hard drive failed on my laptop. We reinstalled a new hard drive for the OS and Windows Ultimate 7.0. I JUST installed Acrobat of the suite CS4 and it took the serial numbers of the CS3 of origin of the product and the CS4 update correctly. I have all the updates of CS3.0 CS4 CS5 CS5.5 and CS6.

  When you open the ACROBAT program for the first time, it gave an error that there were no internet or the activation server. As I was at the time ON the internet, and then he had to do with to achieve the activation server. This laptop (and desktop) were previously allowed for these applications.

  How should I proceed in order to get Acrobat 9.0 CS4 to work on the laptop and reinstalled?

  Hi jimg82512687,

  Are you able to activate the other CS4 apps?

  If try Yes troubleshooting mentioned in this KB doc https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html .

  Kind regards
  Nicos

• HP compaq: no sound after reinstalling windows

  After I reinstalled windows, the noise was gone, and I want to say the sound chip embedded in the computer. I tried to install all types of drivers, but nothing helped. It shows that there is no audio device. So is there some software/driver that woukld do computer see and use the chip integratedsound?

  It changes everything because the dc7800 and dc7900 use a different audio chip than does the dc5700/dc7700.

  You need this audio driver W7 for the dc7900...

  This package contains the driver for the ADI Audio CODEC high definition (HD) in desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

• Satellite A50 432: after reinstalling Windows I can't do its job properly

  I have a problem with the laptop A50-432 of unknown source without recovery CD when Windows XP has been reinstalled and after re-installation, I can no longer do its job properly.

  I have installed sound drivers SigmaTel C-Major Audio-sa50-xp - 614013835.zip:

  27/05/04, its pilot, Sigma, Windows XP, 6.14.01.3835, World Wide

  and what I get is noise from great height and whistle of the right speaker only. If I set an audio file for playback I can rarely hear good audio clean for a second or less and then he returned to his noises and whistles. If I connect the headphones to use instead of the speakers, the effect is the same.

  I followed the installation order and then reinstalled the drivers several times with no luck for his work. Audio worked fine before reinstalling Windows. I have no problem with the rest of the component and I also tried to disable the other drivers (for LAN, IEEE 1394, 802.11, etc.) without effect.

  Does anyone have ideas how I can fix this problem?

  Thank you

  Roman salute

  This problem occurs when you use the headset?