Error 10 on two CD & DVDs. Error reads: InvalidDeploymentException (ManifestParse)
The 'front page' error reports "error 10" - cannot start. ". However, a complete error report of Sys Info is located further down this page.
Here's the story.
I hear that, mechanically, the two plates try to boot,- so I don't think that it is the material.
This computer is a dinosaur. Originally XP - replaced with Vista "upgrade"(lol!). I see the apps that I installed from the CD, so I know that - in a first time - at least among the "trays" worked, but now, nor lead the work. I never got a full-run thru of the operations audit, because I became infatuated with new computer laptop, and ignorred old office... so I don't know when or how the problem manifests. No one else never used, however.
I get new equipment to Win 7, BUT want to use it as 'slave' for monitoring sys.
I don't know much, but have tried everything - including the installation of other software applications. I am now all crowded with useless junk.
The good news is that I have Vista Upgrade disk - but I can't MAKE RUN FOR REPAIR! Is it possible to run to the computer via the DVD recorder connected to my TV? Is this a viable option at all?
This is the information report on the system:
COMPONENT TRANSACTION FAILURE SUMMARY STORE
No transaction error.
CAVEATS
There are no warnings during this operation.
STATUS OF OPERATION
* [30/08/2011 08:26:53]: C:\Program Files\Windows Media Player\wmssetup.dll activation began.
ERROR DETAILS
The following errors were detected during this operation.
* [30/08/2011 08:26:55] System.Deployment.Application.InvalidDeploymentException (ManifestParse)
-Clear exception of file:///C:/Program%20Files/Windows%20Media%20Player/wmssetup.dllreading: the manifest is not valid or the file could not be opened.
-Source: System.Deployment
-Stack trace:
at System.Deployment.Application.ManifestReader.FromDocument (String localPath, ManifestType manifestType, Uri sourceUri)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass (SubscriptionStore subStore, Uri & sourceUri, TempFile & tempFile, SubscriptionState & subreport, IDownloadNotification notification options, ServerInformation & serverInformation DownloadOptions)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass (SubscriptionStore subStore, Uri & sourceUri, TempFile & tempFile, SubscriptionState & subreport, IDownloadNotification notification, DownloadOptions options)
to System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation (activationUri Uri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker (Object state)
-The inner Exception-
System.Xml.XmlException
-The data at the root level is invalid. Line 1, position 1.
-Source: System.Xml
-Stack trace:
at System.Xml.XmlTextReaderImpl.Throw (Exception e)
at System.Xml.XmlTextReaderImpl.Throw (String res, String arg)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace)
at System.Xml.XmlTextReaderImpl.ParseDocumentContent)
at System.Xml.XmlTextReaderImpl.Read)
at System.Deployment.Application.ManifestValidatingReader.XmlFilteredReader.Read)
at System.Xml.XmlCharCheckingReader.Read)
at System.Xml.XsdValidatingReader.Read)
at System.Deployment.Application.ManifestReader.FromDocument (String localPath, ManifestType manifestType, Uri sourceUri)
STORE THE TRANSACTION DETAILS PANE
No transaction information is available.
That's all. Suggestions? I really need this to work. Thank you!
Hi Neelee,
You can read the following article and see if it helps:
Your CD or DVD drive cannot read or write media
Hope this information is useful.
Tags: Windows
Similar Questions
-
ORA-12570: network Session: error reading unexpected package
Hello
When installing in a system we have a step to import uses managed ODP.NET package NuGet Oracles Oracle.ManagedDataAccess.12.1.022. After some repeated import the following error occurs:
Oracle.ManagedDataAccess.Client.OracleException (0x80004005): ORA-12570: network logon: unexpected package-> OracleInternal.Network.NetworkException (0x80004005) read error: ORA-12570: network logon: package unexpected error reading-> System.Net.Sockets.SocketException (0x80004005): an operation on a socket could not be performed because the system didn't have enough memory buffer or because a queue was full
at System.Net.Sockets.Socket.Receive (Byte [] buffer, Int32 offset, Int32, SocketFlags socketFlags size)
to OracleInternal.Network.ReaderStream.Read (OB OraBuf)
to OracleInternal.Network.ReaderStream.Read (OB OraBuf)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork)
at OracleInternal.TTC.OraBufReader.Read (Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1 (Boolean bIgnoreData)
to OracleInternal.TTC.TTCExecuteSql.ReceiveExecuteResponse (bands accessor [] & defineAccessors, accessor [] bindAccessors, bHasReturningParams Boolean, SQLMetaData statementType SqlStatementType & sqlMetaData, Int32 noOfRowsToFetch, Int32, Int64 noOfRowsFetchedLastTime & noOfRowsFetched, Int64 & queryId, Int32 longFetchSize, initialLOBFetchSize of Int64, Int64 [] scnFromExecution, bAllPureInputBinds, DataUnmarshaller & dataUnmarshaller, MarshalBindParameterValueHelper & marshalBindParamsHelper, Int64 [], Boolean & rowsAffectedByArrayBind, bDefineDone Boolean, Boolean & bMoreThanOneRowAffectedByDmlWithRetClause, list 1 & implicitRSList, Boolean bLOBArrayFetchRequired)
at Oracle.ManagedDataAccess.Client.OracleException.HandleError (OracleTraceLevel level, OracleTraceTag tag, Exception ex)
to OracleInternal.TTC.TTCExecuteSql.ReceiveExecuteResponse (bands accessor [] & defineAccessors, accessor [] bindAccessors, bHasReturningParams Boolean, SQLMetaData statementType SqlStatementType & sqlMetaData, Int32 noOfRowsToFetch, Int32, Int64 noOfRowsFetchedLastTime & noOfRowsFetched, Int64 & queryId, Int32 longFetchSize, initialLOBFetchSize of Int64, Int64 [] scnFromExecution, bAllPureInputBinds, DataUnmarshaller & dataUnmarshaller, MarshalBindParameterValueHelper & marshalBindParamsHelper, Int64 [], Boolean & rowsAffectedByArrayBind, bDefineDone Boolean, Boolean & bMoreThanOneRowAffectedByDmlWithRetClause, list 1 & implicitRSList, Boolean bLOBArrayFetchRequired)
at OracleInternal.ServiceObjects.OracleCommandImpl.ExecuteNonQuery (String queryString, OracleParameterCollection paramColl, CommandType commandType, OracleConnectionImpl connectionImpl, longFetchSize of Int32, Int64 clientInitialLOBFS, OracleDependencyImpl orclDependencyImpl, Int64 [] scnFromExecution, OracleParameterCollection & bindByPositionParamColl, Boolean bBindParamPresent, OracleException & exceptionForArrayBindDML, Boolean isFromEF)
at Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteNonQuery)
xxx. BatchExecuteObjectValuesContent (xr XmlReader, String sql, Int32 objectValueIdColumnIndex, Int32 languageIdColumnIndex, Int32 fieldIdColumnIndex)
I looked for some sort of work autour or bug but found nothing. This error does not appear always, most of the machines appear quite able to complete import together without fault.
The BatchExecuteObjectValuesContent() method uses ArrayBind to create multiple entries to insert quickly.
Anyone have experience with? Is it a bug or there at - it a setting that I need to adjust?
Thanks in advance!
/ Nicklas
The two likely culprits of this error are to run out of memory or port of exhaustion. Or the other of them occur at the time that the error occurs?
-
When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."
[moved based on duplicated... messages which I deleted... MOD]
You try to make a DVD or Blu - ray (or both)?
This absurd error with 2 exports that you describe. If Yes, provide the screenshot of mediainfo John queries.
-
Error reading the configuration file
I install the Adobe Access 4.0 trial license server and when I run the g - r on the Tomcat installation dir \licenseserver Validator.bat I get a message "error reading configuration file. Here's the log dump:
[] 2012-12-20 22:46:32, 176 INFO [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] class loader of partition creation «flashaccessserver"with «[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]» libraries
[2012-12-20 22:46:32, ERROR 582 [. com.adobe.flashaccess.server.license.tools.Validator [Partition (flashaccessserver)]] could not validate the deployment tenant "flashaccessserver/sampletenant".
com.adobe.flashaccess.server.common.configuration.ConfigurationException: error reading the configuration file
at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
to com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl. < init > (TenantConfigurationImpl.java:110)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment (Validator.j ava: 255)
to com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment (Validato r.java:283)
at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment (Validator.j ava: 301)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: could not load the configuration
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; HVAC-complex - type. 2.4.b: the content of the element "KeyServer" is not over. A the "{"http://licenseserver.flashaccess.adobe.com/tenant": file"}' should. "
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException (exercise wn Source)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$ XSIErrorReporter.reportErro (Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError (unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT (unknown Source) type
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType (KNU nown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent (exercise wn Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement (unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement (KNU nown Source)
to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDri ver.next (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next (unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (exercise wn Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (unknown Source)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse (unknown Source)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse (unknown Source)
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
... 9 more
I use a relative path to my .pfx file to the transportServerCredential and the licenseServerCredential in the flashaccess - tenant.xml and my password was encoded using the Scrambler.bat.
Also, when I check using the configuration http://< LicenseServer >: 8080/flashaccessserver/flashaccess/license/v2 I get the message "license server is configured properly."
Any ideas why the Validator.bat cannot read the configuration file?
Neil and may,
I also used the evaluation of access version 4.0, and I got stuck in the same place you did. I had two main symptoms.
(1) the validator was not with the same error that you are experiencing.
(2) later, while trying to acquire a license for playing packaged content, encrypted, the license acquisition failed, and the cause of the original error has also pointed out the Key Server parameter in flashaccess - tenant.xml.
According to the documentation, the certificate server key (and in fact the key server itself) are supposed to will be necessary only when a policy calls for remote key service to clients of iOS. But, I took a chance and added the .pem file in the sampletenants directory and made him the flashaccess - tenant.xml as follows:
Configuration | Tenant | Certificates | KeyServer. File | path =
The result was a successful validation of the configuration and the successful license acquisition and reading - and the key server is not even in the course of execution. Apparently with 4.0 certificate is part of the minimum for the scanner configuration, even if the documentation says something quite different.
Good luck, hope this helps.
Scott
-
Error reading rhvariable.apj after crash RH9
I add me variables to RH9 on my pc Win XP 64 and RoboHelp crashes. Not unexpected crashes of RoboHelp, several times a day, so I save often. This time, when the reopening of my project, I get an error reading rhvariable.apj < 5 >.
My rhvariable.apj file is there with the biggest part of my job (currently more than 600 variables) that I don't want to do it again. If I look at my variables, there is none shown in the editor.
How can I get my variables without having to re-enter all? I open the file in Notepad, and it seems OK, no strange characters and the beginning and the end of the file corresponds to the variables files in other projects. I also tried to delete the file .cpd and this has no effect.
Any help is greatly appreciated.
Thank you
DV
After a lot of trial and error, I managed to solve this problem myself. The main is that RoboHelp allows you to perform a variable without a value, but this is what prevents the rhvariable.apj file is read correctly.
Long story, I'm trying enter nearly a thousand variables that are the part numbers for a new product. Two of these variables had not a part number so I left empty them. RH9 didn't complain or indicate that it was invalid in some way.
After that I started RH9 and performed a variable, I could see that the rhvariable file has my new entry. So, I copied and pasted a variable of the old rhvariable file and then restarted RH9. He appeared. Then I tried 10 variables, it worked. Somewhere near 400 variables to the bottom of the list are two variables with a name but no value. Then I entered the words "novalue" and everything worked.
If a problem with a variable name and do not have a value, then the software should not allow you to create this variable. The only good thing about this experience is that I better understand how the .cpd file is created.
Thanks for trying to help me if I appreciate this effort.
I learned that my WinXP 64 OS is not supported and it gives me ammunition to push my COMPUTER service for the upgrade. In fact they down like being my new Win7 system.
-
ORA-29284: error reading file
Hello
You need two flat files on a privilege of 2000.
1. read a file. CSV
2. keep a regular, unformatted table information
Here are the steps I did to reach the first goal...
1 TEST READING FILE
CREATE OR REPLACE DIRECTORY PUBLIC_ACCESS AS 'C:\REPORTES_REY ';
GRANT READ, WRITE ON DIRECTORY PUBLIC_ACCESS TO THE PUBLIC;
-THIS PL / SQL works well...
DECLARE
utl_file.file_type v1.
VARCHAR2 (600) v2;
Start
v1: = utl_file.fopen('PUBLIC_ACCESS','prueba20110218.csv','R'); -WORKS WELL...
-v1: = utl_file.fopen('PUBLIC_ACCESS','sui_facturacion_alcantarillado_15085_2011_01_76845_001.csv','R');
loop
Start
UTL_FILE.get_line (v1, v2);
dbms_output.put_line ('el contenido del archivo're: ' | v2);
exception
When no_data_found then
"exit";
end;
dbms_output.put_line ('-'); LINE BREAK
end loop;
UTL_FILE.fclose (v1);
exception
while others then
dbms_output.put_line (SQLERRM);
end;
/
but when you change the name of the prueba20110218.csv-> card file sui_facturacion_alcantarillado_15085_2011_01_76845_001.csv shows the following error
ORA-29284: error reading from file+.
-This error be?
Thank you for the attention and offered cooperation...
Nice day...
REYNEL SALAZAR MARTINEZ
Cali-ColombiaRey-user6318244 says:
I do not understand the error-> ORA-06502
This means that you read from the file exceeds 800 characters/bytes and cannot fit into the variable v2 which is declared as varchar2 (800). Try the growing size of v2:
VARCHAR2 (1024) v2;
SY.
-
I have a START BLADE OF DARKNESS game, whenever I try to install an error message appears saying: Error 1305. Error reading the file.
I don't have a clue guys! Any suggestions would be greatly appreciated.
Thank you...
Micky.b
[Moved from comments]
Hey Micky,
Until we provide troubleshooting steps, we would like to know as a result of information from you.
(1) what version of the Windows operating system you have installed on your computer?
(2) how you try to install the game? What is a disk installation or a set of file?
If you try to install the game on Windows 7 or Windows 8 so I would like to inform you that there are few games that are not compatible with these operating systems. You should check from the link below. However if it shows that the game is not compatible then you can install the game in compatibility mode.
Compatibility Center
http://www.Microsoft.com/en-in/Windows/compatibility/WIN8/CompatCenter/home?language=en-us '
You can follow the links given below to install the game in compatibility mode.
For Windows Vista: Make older programs run in this version of Windows
http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
For Windows 7: make older programs run in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
For Windows 8: make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows
If you still experience the issue I suggest you to contact forum support Severance Blade Of Darkness.
Feel free to write us if you have any further questions. We will be happy to help you.
-
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
I get the following error message when you try to access one of my hotmail accounts:
Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.What is this error and how to fix it?Thanks EllieI get the same message... must be a problem with hotmail.
-
How to restore the documents now say "error reading file"?
I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.
Help!
Hello
1. what documents do you speak?
2. were you able to view these files before?
3. don't you make recent changes?
I suggest you try to restore the computer to an earlier point and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
It will be useful.
-
Windows doesn't let me download an application from my library to the city. It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.
I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '. I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file." I "ve never had no problem download at this point.
For the same problem, I tried the following and still no luck:
I've got "pop-up blocker" turned off.
I disabled the "Inprivate filtering",
I turned off my "firewall" temprarilyAny other suggestions for this problem?
Thanks for your help!
Winifred_MHi Winifred_M,
Thanks for posting on the Forum of answers.
If you can provide a link to the application, we can try to recreate the issue.
Otherwise, it is perhaps a question that you should take with the Publisher of the software.However, you can try to use the Windows Installer CleanUp utility:
When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.
Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.
Download the Windows Installer CleanUp utilityWe have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.
You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".
You can download Windows Install CleanUp Utility starting from Microsoft Download Center:
Download the Windows Installer Cleanup Utility package now.
(http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)Copied from http://support.microsoft.com/kb/290301
Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error reading from a text file?
Hello
I am trying to add a NI SOFTMOTION TABLE in my project using a text file that contains the data points I want to use to make a contour move, and Labview opens but returns an error message me "ERROR READING FILE". In fact, I see all my points in the table in Labview, but it creates one more line to each column where a "unreadable" message just wrote.
No idea how solve it?
Thanks in advance!
Just shooting in the dark:
in the photo, it seems that there is a problem with the last line of the file,
This is an "empty" one (only an end of line).
What happens if you remove this line empty?
Marco
-
"Error reading TrayIcon1 - &#62; Visible: Canoe Create Shelll Notificationn Icon"
I get this error when I reboot XP anyone know why?
"" Error reading TrayIcon1-> Visible: Canoe Create Shelll Notificationn Icon ".
Using a KVM switch?
Are you running Windows XP?
Have you even tried to use Google to search for the message and see what are the solutions out there on the World Wide Web for this?
Here is an example of a search result, Google can help:
http://www.dllshepherd.NET/2011/01/fixing-error-error-reading-trayicon1.html
Looking at "alternatives" for this error message on the WWW appears to delay the launch of this program by using a third-party application. Glary Utilities is such an animal, but there are other options as well.
-
train Simulator says "error reading train database file"
I have question for train simulator? I can't play the game more that comes with the following error.
Error reading train database file, file: line: 114How can I fix?I'm using windows xp with the latest service pack.I hope for a quick response.Hello
1. don't you make changes to the computer until the problem occurred?
2. are you play online or is installed on the computer?
If it is installed on the computer then I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/303032
If the problem persists then I suggest you send your query in the link below.
http://www.Microsoft.com/games/trainsimulator/support.aspx
Hope this information is useful.
-
My os is windows xp (sp3) I can not solve. Help me, providing a perfect solution
the error is "error reading the volume of c.Hi Nithin 1990,Run the check disk (chkdsk) to solve this problem.Here is an article that will give you the information to do the same:
Maybe you are looking for
-
Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64
I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course). Worse, it's that my touchp
-
Pavilion dv6 6119tx: dv6 beatsaudio driver 6119tx
Mr President My computer hp pavilion dv6 6119tx laptop. Kindly give me link of the driver software audio beats & bio metric software driver link (hp simple pass JJUJ print).
-
Not sure if the problem is with Windows 10, iTunes or both. Since I've upgraded to the latest version of iTunes and Windows 10, I can't sync my iPhone or iPad. iTunes does not either. I did recharge, all programs from apple, and it doesn't work. Sug
-
Original title: when I connect my ipod to my laptop it causes BSOD. When I connect my ipod to my laptop I get BSOD immediately. I have contacted apple and crossed a complete uninstall of all drivers and apple software and reinstalled the The BAD_POOL
-
I bought adobe professional DC2015 12.0 million FRANCS, from where to download the product?You can provoide be the link to download the my product license?