Error 1000-0142

Similar Questions

• D600-1000-0142 error code

  Help! Windows used to run... Well it takes an hour to load, use about 4 colors and crashes when I ask him to do anything!

  Found that DSI short status test and got an error code 1000-0142 with a message... Unit4 test: Drive has failed. Status byte = 89
  tried to run Dell PC Restore by Symantec to restore the default settings, you press the ctrl and F11 keys when the dell splash screen appeared, but nothing seemed to happen
  I have no disks I thought that all software has been pre-loaded, my laptop is flea market.
  Help, please
  Thank you

  
  

• Error 1000

  Hi all

  In a project, we use vi server to perform a first level VI which calls the function NI XNET (FLAX), we use an Invoke node with the Run method and set the value Falseoption until done .

  To stop this vi we call a control value set and the control Stop set to true. After that, we check the status of the vi and he have an abortion if she does not correctly stop after a timeout.

  It works correctly in labview 2010 SP1, XNET 1.1.1 and with the same code in labview 2014 XNET 14.0 we get 1000 error when it wants to abandon the vi (the vi does not stop, it remains in the executing State). The same code also works if I put the vi does not need to be reentrant...

  -Why this vi does not stop properly (maybe an evolution in the XNET driver?).

  -why I can't leave without error?

  Any idea is welcome...

  You can't give up a sub - vi - it belongs to the appellant

  Abort, method

  Cancels execution of a top-level VI.

  This method returns error 1000 if you call on a Subvi. Otherwise, this method is similar to press the button to Cancel the execution on the toolbar.

  If I remember well thoroughly there was a bug fix earlier set wherever the mistake was not specified correctly.  the error was always supposed to be there, but has not reported correctly.

  You can update the code to use the asynchronous call of reference during a call and collect the regime.  See the examples in 2014

• Error 1000 vi is not in a consistent state

  There is a lot of info on it, but I can't seem to find the solution to my specific problem.

  I'm calling from 4 different vi in sub-panels. All 4 are set up exactly the same way in the properties. When I open and run the live by the reference method in the first level vi everything works fine. However, when I exit the application of higher level, then try to restart it I get the "Error 1000" posts... VI is not in a consistent state. "for 2 of the 4 subvis because they always in the background. I have to use a "third party" abort vi for the 2 to stop so I can run the app again without errors. It drives me crazy. They are all set up the same properties. Is there something that I am missing? Thanks in advance.

  All the sub-panels you've called do not stop when you leave the top-level application.  Some are still running in the background, even if they no longer appear on your application of level superior sub-panels. When you open the sub-panels screws, after the exit, you will see that they are still running. When you run the application again, it tries to run the sub-panels, some work already and that is why the message. You must bind the output on the application of high level to the other secondary live you can use a simple Boolean variable global or shared to complete the sub-panels.

• File system error (1000)

  Hello

  I try to write to a file on the Blackberry, by using OutputStream.write(byte[]), but I get FileIOException - ' file system error (1000).

  Where can I find information about error codes and see what means this error?

  Thank you.

  1000 means file is not open.  These are defined and explained in FileIOException

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• Error 1000 CC Installation Manager installation

  I try to install Installation Manager adobe creative cloud on my work machine.  I installed it at home without difficulty.  Immediately when executing the download stub, I get a message indicating that installation cannot take place due to an error: 1000.

  No other information is provided, and my seraches seem not to identify with a definition of this error code.

  The only possibility I can think of is that my company uses Adobe Acrobat Pro 9.  Otherwise, no other adobe application is installed.

  Any help would be most appreciated.

  Hello. We have the same problem. And because the installation media has been on the shared network folder.

  We moved CreativeCloudSet - Up.exe local storage. Now it works!

• Error code 0142

  I got up this morning and turned on my computer and I got an error Code 0142.  Error 2000-0142 MSg.  MSc unit 0 Drive Test failed.  79 status byte.  Can someone help me?  My computer was working fine yesterday when I turned it off.

  
  

• Error: 1000: No bitrate match

  Does anyone have an answer for this?
  
  
  Error: 1000: No bitrate match
  to mx.controls.videoClasses::VideoPlayer/pause()
  at mx.controls::VideoDisplay/pause()
  components: page 7 / playPause)
  components: page 7 / __playPauseBtn_click)
  
  Thanks in advance,
  
  Gene

  I found the solution.

  Please be aware that these steps do not solve any problem with Flash, but are a stage of configuration of Microsoft Windows 2003 and Microsoft IIS Server 6.0. Difficulties in the execution of these instructions or errors that could result from changing the settings of your system should be directed to Microsoft. For more details, please refer to the IIS documentation.

  On the Windows 2003 server, open Internet Information Services Manager.
  Expand the server to the Local computer.
  Right click on the server to the local computer, and then select Properties.
  Select the MIME Types tab.
  Click new and enter the following information:
  Associated Extension:. FLV
  MIME Type box: flv-application/octet-stream
  Click OK.
  Restart the World Wide Web publishing service.

• Diagnostic test returns with this error: 1000-0146.

  Original title: 1000-0146

  ran diagnostic test and error code from 1000-0146 everything works ok

  Why do you think that will help a clean boot?

  It is a pre-boot diagnostic assessment Dell computer error code you can read here:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=266787&doclang=en&l=en&s=Gen&cs=

  I think it means that the hard drive may be failing.  How will a start clean and check correct this?

  It seems that these companies will show anything to get a link to an article here somehow - even if it makes no sense.

  If forums MS Answers would invite some information about the system, when a new question is asked, maybe... just maybe we would not have these answers.

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Anyone know the cause of an application with the following event ID error: 1000?

  An error caused the program iTunes on my computer to stop working causing Windows to close.   I found the error in the case where connects and looked up the info listed under properties of the event.   I included the info below.

  Log name: Application
  Source: Application error
  Date: 20/05/2014-12:43:07 AM
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Melanie-PC
  Description:
  Failed application iTunes.exe, version 11.2.0.115, time stamp 0x53755cb7, module AirTrafficHost.dll, version 17.351.6.52, time stamp 0x52fc12ed, exception 0xc0000005, offset error 0x000024a4, process 0x1d30 id code, failed to start the application time 0x01cf73e2c04f2ca1.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      110370
      Application
      Melanie-PC
     
   
   
      iTunes.exe
      11.2.0.115
      53755cb7
      AirTrafficHost.dll
      17.351.6.52
      52fc12ed
      c0000005
      000024a 4
      1 d 30
      01cf73e2c04f2ca1
   
  

  When I clicked on the link to the online help, I got was this:

  Details
  Product:	Windows operating system
  Event ID:	1000
  Source:	Application error
  Version:	5.2
  Symbolic name:	ER_USERCRASH_LOG
  Message:	Failed application %1, version 2 %, failed module 3%. version 4%, fault address 0 x %5.

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• error 2000-0142

  So I'm the mother of bricks typical of the update of the bios dell (aprox 1.5 year ago) I just installed a motherboard renovated same stickers for CN-07JNHO info. Started machine and loading, I received the request of 'reboot & select proper boot device '. I rebooted w / f12 and got into the bios page. He had the hard drive to boot class 4th so I moved it to... recorded 1 restart the same thing. Double checked that my hard drive son have been linked to the 3rd test... same results. Did a check of the ePSA and got an error code 2000-0142 as hard drive 0... as it is the is not find? I'll post pictures to help and any help is appreciated!

  error code # 2000-0142 validation # 114880

  History *.

  Before pasting the couple paper weight thousand dollar in the closet... it would abandon the beep codes at the start and never from desktop... I made a few bios hardware reset with swaping clips on the pins / changed MB battery ect and he would sometimes launch and be playable until he cut power failure or an ect update and when starting it has always been the problem with the the bios loading. I got that last for a few months... until finally nothing helps it load the BIOS.

  Alienware Aurora R4

  service tag #.

  ADMIN NOTE: maintain the label removed by privacy policy >

  (awarded to nine MB)  (old MB #)

  ADMIN NOTE: maintain the label removed by privacy policy >

  )

  CPU i7 - 3930 K 3.20 GHz

  Windows 7 64 bit OP

  

  

  = 2000-0142 drive self test failed

  You will probably have to replace the hard drive...

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .