Error 1000

Similar Questions

• Error 1000 vi is not in a consistent state

  There is a lot of info on it, but I can't seem to find the solution to my specific problem.

  I'm calling from 4 different vi in sub-panels. All 4 are set up exactly the same way in the properties. When I open and run the live by the reference method in the first level vi everything works fine. However, when I exit the application of higher level, then try to restart it I get the "Error 1000" posts... VI is not in a consistent state. "for 2 of the 4 subvis because they always in the background. I have to use a "third party" abort vi for the 2 to stop so I can run the app again without errors. It drives me crazy. They are all set up the same properties. Is there something that I am missing? Thanks in advance.

  All the sub-panels you've called do not stop when you leave the top-level application.  Some are still running in the background, even if they no longer appear on your application of level superior sub-panels. When you open the sub-panels screws, after the exit, you will see that they are still running. When you run the application again, it tries to run the sub-panels, some work already and that is why the message. You must bind the output on the application of high level to the other secondary live you can use a simple Boolean variable global or shared to complete the sub-panels.

• File system error (1000)

  Hello

  I try to write to a file on the Blackberry, by using OutputStream.write(byte[]), but I get FileIOException - ' file system error (1000).

  Where can I find information about error codes and see what means this error?

  Thank you.

  1000 means file is not open.  These are defined and explained in FileIOException

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• Error 1000 CC Installation Manager installation

  I try to install Installation Manager adobe creative cloud on my work machine.  I installed it at home without difficulty.  Immediately when executing the download stub, I get a message indicating that installation cannot take place due to an error: 1000.

  No other information is provided, and my seraches seem not to identify with a definition of this error code.

  The only possibility I can think of is that my company uses Adobe Acrobat Pro 9.  Otherwise, no other adobe application is installed.

  Any help would be most appreciated.

  Hello. We have the same problem. And because the installation media has been on the shared network folder.

  We moved CreativeCloudSet - Up.exe local storage. Now it works!

• Error: 1000: No bitrate match

  Does anyone have an answer for this?
  
  
  Error: 1000: No bitrate match
  to mx.controls.videoClasses::VideoPlayer/pause()
  at mx.controls::VideoDisplay/pause()
  components: page 7 / playPause)
  components: page 7 / __playPauseBtn_click)
  
  Thanks in advance,
  
  Gene

  I found the solution.

  Please be aware that these steps do not solve any problem with Flash, but are a stage of configuration of Microsoft Windows 2003 and Microsoft IIS Server 6.0. Difficulties in the execution of these instructions or errors that could result from changing the settings of your system should be directed to Microsoft. For more details, please refer to the IIS documentation.

  On the Windows 2003 server, open Internet Information Services Manager.
  Expand the server to the Local computer.
  Right click on the server to the local computer, and then select Properties.
  Select the MIME Types tab.
  Click new and enter the following information:
  Associated Extension:. FLV
  MIME Type box: flv-application/octet-stream
  Click OK.
  Restart the World Wide Web publishing service.

• Diagnostic test returns with this error: 1000-0146.

  Original title: 1000-0146

  ran diagnostic test and error code from 1000-0146 everything works ok

  Why do you think that will help a clean boot?

  It is a pre-boot diagnostic assessment Dell computer error code you can read here:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=266787&doclang=en&l=en&s=Gen&cs=

  I think it means that the hard drive may be failing.  How will a start clean and check correct this?

  It seems that these companies will show anything to get a link to an article here somehow - even if it makes no sense.

  If forums MS Answers would invite some information about the system, when a new question is asked, maybe... just maybe we would not have these answers.

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Anyone know the cause of an application with the following event ID error: 1000?

  An error caused the program iTunes on my computer to stop working causing Windows to close.   I found the error in the case where connects and looked up the info listed under properties of the event.   I included the info below.

  Log name: Application
  Source: Application error
  Date: 20/05/2014-12:43:07 AM
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Melanie-PC
  Description:
  Failed application iTunes.exe, version 11.2.0.115, time stamp 0x53755cb7, module AirTrafficHost.dll, version 17.351.6.52, time stamp 0x52fc12ed, exception 0xc0000005, offset error 0x000024a4, process 0x1d30 id code, failed to start the application time 0x01cf73e2c04f2ca1.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      110370
      Application
      Melanie-PC
     
   
   
      iTunes.exe
      11.2.0.115
      53755cb7
      AirTrafficHost.dll
      17.351.6.52
      52fc12ed
      c0000005
      000024a 4
      1 d 30
      01cf73e2c04f2ca1
   
  

  When I clicked on the link to the online help, I got was this:

  Details
  Product:	Windows operating system
  Event ID:	1000
  Source:	Application error
  Version:	5.2
  Symbolic name:	ER_USERCRASH_LOG
  Message:	Failed application %1, version 2 %, failed module 3%. version 4%, fault address 0 x %5.

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Error 1000-0142

  Greetings,

  I am the original owner of the laptop 600 m (delivery 3/04), which currently runs on Windows XP Pro.

  40 GB hard drive. Has been one almost perfect machine other than a few minor issues software solved.

  After completing a session last night, I went to the start menu to turn off.

  I was marked "new software" has been added? Nothing. that I was aware.

  Stop.

  Connected later in the day before... Error message "Windows was not start because of the following is missing or damaged:

  \WINDOWS\system32\config\SYSTEM.

  Tried to boot mode safe... even.

  Tried the last known good setting... even.

  F2 set up Drive Self Test (DST short) error Code is not 1000-0142

  F12 diagnosis same as above with the newspapers of the DST contains the previous errors.

  Hardware diagnostics walked through extended Test and symptoms without negative results tree.

  F12 tried to start w / CD player and operating system CD (Windows XP Pro) missing-corrupted message again.

  F12 start w / the repair console and CD player.

  Chkdsk /r ran twice... 1 short and no repair. 2nd time about 1.5 h and some files repaired or replaced.

  Again would not but without missing corrupt message.

  Ran my Maxtor external hard drive security forest recovery CD... reboot, always the same corrupt message missin sys 32 message mentioned earlier.

  I've seen subjects compared to the this to the Board of Directors and also watched the Microsoft site for more information.

  Things seem to point to the drive being smoked, but I was wondering if I would have taken a virus that might have caused it... referring back to the prior of software new message until the last stop of the system.

  New test or maybe a system restore I can download on a CD and launch.

  Any ideas or comments would be appreciated.

  
  

• Explorer Crash: Error 1000 at the address 0x4ec683bd

  Hello!

  At first, I have to say my system was running stable and was clean.

  A few days ago I had to reinstall Windows Media Player 11... do not lose the patches and updates for WMP11, I have uninstalled and reinstalled the updates (windows.update) after the new installation of WMP11.

  List updates removed:
  KB936782Uninst.log
  KB954154Uninst.log
  KB939683Uninst.log
  KB952069Uninst.log
  KB973540Uninst.log
  KB968816Uninst.log
  KB954155Uninst.log
  KB978695Uninst.log
  KB975558Uninst.log
  KB2378111Uninst.log
  KB959772Uninst.log
  KB929399Uninst.log
  WMFDist11Uninst.log
  wmp11Uninst.log

  Now I get crashes every time like this (no blue screen! task stops and restarts...):
  Failing application explorer.exe, version 6.0.2900.5512, failed module unknown, version 0.0.0.0, address failure 0x4ec683bd.

  Dr.Watson LOG:

  *---> Dump State of Id of Thread 0xdec<>

  EAX = 00000001 ebx = 00000000 ecx = 04c0ff00 edx = 7c90e514 esi = 4edd72a4 edi = 7e42a340
  EIP = 4ec683bd esp = 04c0ff84 ebp = 04c0ffb4 iopl = 0 nv up ei pl zr po nc
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000246

  function:
  No possible prior disassembly
  4ec683bd? ???
  4ec683bf? ???
  4ec683c1? ???
  4ec683c3? ???
  4ec683c5? ???
  4ec683c7? ???
  4ec683c9? ???
  4ec683cb? ???
  4ec683cd? ???
  BREAKDOWN-> 4ec683bd? ???
  Error 0 x 00000001
  4ec683bf? ???
  4ec683c1? ???
  4ec683c3? ???
  4ec683c5? ???
  4ec683c7? ???
  4ec683c9? ???
  4ec683cb? ???
  4ec683cd? ???
  4ec683cf? ???
  4ec683d1? ???

  *---> Back stack memory stack<>
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  ChildEBP RetAddr Args to child
  00000011 00000000 804f8cd9 0x4ec683bd 7c80a174 04c0ff80
  04c0ffb4 7c80b729 7c80a174 00000000 00000011 kernel32! WideCharToMultiByte
  04c0ffec 4ec68361 00000000 00000000 00000000 kernel32! GetModuleFileNameA + 0x1ba

  .. .any help or advice?

  THX!

  Due to the new BSOD in the last time, I did a RAM check... result: 1 RAM module corrupted, replaced it by a new... no more errors!

• manage the runtime error 1000: server lost connection/file not found

  I have a videoDisplay object that throws an error file not found on the server running, even if it is there. Sometimes it works, sometimes it throws the error and the program cannot recover from the error, so after that the error is thrown, the object is stuck until the refill. I've seen examples of using the NetStream class to load the file before playing and also the class NetConnection.
  
  What is your preferred method for the two video load, assuming that the user will change the video source several times during the session and management research of server errors?

  Yes, you'd know that if you're using FMS.
  If you use a var can be linked to the source of the string, this is the first place I'd watch. You can try a stripped down from the sample application with no link? Just change the source of a button click and see if the server generates the error... I bet it won't

• Tube videos, games on facebook and you will not play error #1000

  What's wrong?  Games and videos don't load and play.

  Hello

  Follow the guide by Daniel_Potyrala on the link below to completely uninstall and reinstall the Flash Player plug-in.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/the-solution-to-most-problems-with-the-Flash-Player-plugin/TD-p/1399719

  Kind regards

  DP - K

• Adobe first cc 2014.2 pro has stopped working error 1000

  I'm about to throw this office into the room. Please someone help me. When I used last week, it closed suddenly after some time. Now, she's so fast, I can record only once. Can anyone help? He's going to the bottom of the Hill and I'm on deadline.

  Thanks in advance,

  Leslie

  Hello

  Please check if this helps: Adobe first CC2014.2 crash

  Thank you

  Regalo

• Error code 1000-0146

  How can I fix the error 1000-0146. I tried to use the original disc, but it will not read windows. My computer turns on like normal but when the windows on the screen lights up it go no further. It won't let me even start in safe mode

  Hi, this error could be that your hard drive has failed and needs replaced. Slan go foill, Paul