error 1046. Stuck with it everyday

Similar Questions

• 6 Lightroom doesn't open, no error message, stuck with trying to open

  Someone at - it help him?  I tried to restart my PC and close but Lightroom 6 does not open correctly, it seems not blocked, no error message.  The night before I stopped back upward at the beginning when the program is closed I didn't made any changes.  I tried to find the lrcat.lock file that is proposed by someone else but can't find it with search for Solution Explorer.

  Katrina

  I tried to install the latest update of lightroom and was some or the problem has been resolved.

  Thanks for your help.

  Katrina

  Sent from my iPad

• W500 Stuck Key error on startup with Thinkvantage key

  Hello.  I have a W500 with a 2nd hard drive through the Bay of cart.  I installed Win2008 Server Standard on the 2nd disk.

  When I boot (cold or hot), the machine and press the blue Thinkvantage button to get the menu of boot options, 90% of the time I hear a few beeps and then see the error "0210: Stuck Key 1 c" and told me to press F1 to go into the BIOS (why I want to go into the BIOS to fix this (, it's beyond me... thanks for the informative error message Lenovo and the reason why or where I have to go into the BIOS).  The 10% of the time I get to the menu, I press F12 so that I can choose an alternative boot and THEN device when I hit ENTER I get beeps and a similar or the same error on a go in the BIOS via F1.

  Now, the W500 is connected to a docking station/Port Replicator Lenovo support.  I do not exactly have the model # handy.  If I boot with the W500 disconnected the Replicator, the failure rate drops between 90% and on 25%...meaning, I press the blue button, I get the menu options of what I want to do, I press F12 to go to boot options, I select a drive, I hit ENTER, and everything is fine.

  It's weird.  I played with this laptop for hours with all kinds of combinations with or without the docking station, the number of times that I push button blue, cold / warm boots, etc.  There seems to be no rhyme or reason... that the failure rate decreases somewhat when you use is not the Replicator.  However, I really need to use the Replicator (I guess I could get Win2008 starting up and then anchor it but this still does not resolve the problem).

  First of all, Yes, I need to use the blue Thinkvantage button because my main drive is Windows XP and Server 2008 do not share the same boot manager.  Second, there is no other connected USB devices that can cause the machine to panic thinking that this isn't a boot (like my external drive) device.  Thirdly, the settings in the BIOS on the boot priority are a bit out of place because the blue Thinkvantage button is supposed to replace... but in the case you are wondering it is on cd/dvd first of all, 0 then, drive 1 third.

  Any ideas or have you seen this?  This error or problem occurs only when I press the Thinkvantage button... which means, if I just restart my XP disc starts just dandy.  But every now and then I need to start on my drive Win2008.

  Thank you very much in advance for your help!

  -Eric

  Eric, welcome to the forum,

  I don't know exactly why you get the key message stuck, maybe your pushing too early or too long?

  Why do not forget you the ThinkVantage button and just press F12 when the message «to stop the startup...» "watch, this will take you directly to the start menu and faster.

  Hope this helps

• MATLAB script node error: 1046

  Hello world

  I now use Labview for data acquisition and want to use MATLAB
  function of node script to do the work of image processing.

  I have some problems get MATLAB script to function properly. The
  It is:

  Whenever I tried to run the program, Labview gave me the following
  error:

  "Error 1046: Labview does not initialize the script server, make sure that the server software is.
  installed. »

  However, MATLAB is installed in the PC. I think that the reason of
  This error is that I'm using a PC based campus University. I got into this PC MATLAB is a network
  versioned. (i.e.
  installed on the network server, but not in the local hard disk).

  Is that what I can do to work around this error?

  Kind regards
  Kent

  Hi hykwei,

  Unfortunately, it is not possible to obtain the MATLAB Script nodes to work
  LabVIEW under your current network configuration. So that the
  Node MATLAB Script to work properly, it takes that MATLAB is
  installed on the same machine as LabVIEW. This means that you will need
  either install MATLAB on the local computer on which you apply
  LabVIEW or you need install and use LabVIEW in the same
  Server computer where MATLAB is installed. Function of MATLAB
  feature, you may be able to make some sort of minimum installation on the
  local machine that adds MATLAB to your registry and program files list,
  but who sends you right to the copy of MATLAB on the network.
  However, I am not aware if it is still an option or how you could go
  on the implementation of this scheme, so if you are interested, I would contact with
  MATLAB for more on this topic.

  Kind regards

• error 1046 scilab

  I have:

  Scilab 5.4.0 (64-bit)

  LabVIEW 2012 (64-bit)

  LabVIEW Scilab Gateway (64-bit)

  Why shouldn't the scilab script work?

  I get error 1046.

  I tried to drop a matlab script and changing server as suggested in post.

  Thank you...

  Hello kikki.

  There are two potential problems:
  (1) we have recently discovered a compatibility issue with the LabVIEW for the door of Scilab and Scilab 5.4.0. A fix should be available very soon.
  (2) this relates to your question about where the looks of LabVIEW for the server. LabVIEW queries the registry to determine where Scilab is installed. This is in the file HKEY_LOCAL_MACHINE\SOFTWARE\Scilab by querying the value of the LASTINSTALL key. It will then look in the folder specified by this key for the SCIPATH value. Unfortunately, when you install a new version of Scilab and then uninstall a previous version, Scilab deletes all registry keys related to its existence - even if a version is still installed. If you have uninstalled a previous version after installing Scilab 5.4, you must reinstall 5.4 Scilab.

  Even after potentially question 2, you will still need a LabVIEW with Scilab bridge update. I'll post here when it is available.

  Grant M.
  Senior Software Engineer | LabVIEW tablets | National Instruments

• Error: 0210 stuck key 19

  Hi all.

  My Lenovo computer is dΘmarre. When I hit the Party think butten fast enough, the screen appears with four options, such as retrieve etc.. However, as soon as I'm in this screen of my laptop starts beeping and gives ERROR 0210 Stuck Key 19 press on after 9 seconds to Setup.

  The keyboard did not work at the time by pressing F1 was not possible.

  After 10 minutes my computer has suddenly started once and I could enter my password normally. However, after 1 minute everywhere ' p appeared.

  As it seems that the p is stuck, I cleaned the keyboard, but do not solve the problem.

  After that, I completely removed the keyboard and mouse. However, that was not also to solve the problem.

  Do you have an idea what to do?

  Thank you

  Arnold

  If other people are having the same problem:
  The solution (for me) seems to be disconnecting the CMOS for a night (more than 8 hours). In other words, remove the BIOS battery. If problems still occur, maybe replace the cmos battery.

• error 0210: stuck key 2B - thinkpad t61 + windows 7 32 bit

  "Whenever I turn on the system I get this error 0210: stuck key 2B. If I press the ESC key, then she starts the operating system windows 7 and also after starting, if I open any ms word document, key # gets automatically in a hurry and I could see characters # continues typing in the doc, he started only after installing the w7 in my thinkpad. Can anyone suggest me if it is a failure of keyboard or operating system issue. This is repeated even after I clean the keyboard and then turn it on again. What happens in the bios, I hear a continuous even in the bios beep as if some button get all the time. So please let me know what I need to change the keyboard everything or just reconnect it or something else is under way. Please help me, I wonder why this problem began immediately after I installed Windows 7. If its an OS problem, am I get the beep sound in the bios, so I think its definitely not the prob of os. something wrong with the keys isn't. Any suggestions or advice are appreciated, I ran the diagnostic of the HD, he took.

  Thank you

  manu555,

  If this happens in the BIOS as you note, that does anything have to do with the operating system.   As suggested from GMAC-R60, this indicates that the keyboard be bad or have a bad / intermittent connection to the system board, or something on the card system goes wrong.

  I will try:

  Checking the connection of physical keyboard:

  Remove and disconnect the keyboard - inspect the plug keyboard for any damage or visible corrosion.  Plug back in carefully and try again.  If the problems are still occurring, try...

  Clearing CMOS and reset the BIOS by default - sometimes you get somewhat stuck causing an abnormal condition:

  Remove the battery & AC adapter / CC.  Press and hold button power several times for an account of 5 each time.   Join AC and restart the computer.    Go into the BIOS and reloading the default values and save.  (there is an option to restore the default settings).  Stop.  Equip your battery and restart.

  Try to replace the keyboard - you can communicate with the service and order a keyboard replacement out of warranty or a local business partner of source on (if there are retailers of warranty allowed in your area, they will have the keyboard in stock or be able to order it).   Alternatively, check sales online - ebay, etc as you wish.

  If none of these steps solve it, so my next suggestion would be the system board, but I think it's rather unlikely.

  Best regards

  Mark

• Software update of the agent is stuck with regular status

  Enterprise Manager 12 c - 12.1.0.1.0
  I downloaded a new agent and tried to apply it. Then I had a mistake and canceled the task of applying. The problem is that the application is stuck with the status 'programmed ':
  
  Apply regular | Oracle | Software agent (12.1.0.1.0) for Microsoft Windows (32-bit) | Microsoft Windows (32-bit) | 12.1.0.1.0
  
  The download buttons and apply a software Agent updates are disabled.
  In the past, I have:
  
  Apply regular Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN
  Successful download of Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN 3 Sep 2012 10:10:02 CEST 627.68
  Available managed Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN 3 Sep 2012 10:06:20 CEST 0.17
  
  If I click the regular status, I get: "+ error work no longer exists or is not accessible.
  I restarted the SGC, and the problem is still there.
  Any ideas? Thank you

  Please apply the patch for 13956401. When you click on the button check the updates on the page to update auto update of the "orphan" status updates will get reconciled.

• VMWare Studio is stuck with the transitional VM does not complete the PostInstall script.

  Hello

  I ran into a situation where the Studio VM got stuck with the post-installation script control that went wrong. The failure is shown in the Studio hanging as shown below.

  Build-a-failed/hung:

  2009-11-30 10:57:29 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 10:57:29 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 10:57:29 to complete, please check that the construction is progressing

  2009-11-30 10:57:29 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 11:28:06 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 11:28:06 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 11:28:06 to complete, please check that the construction is progressing

  2009-11-30 11:28:06 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  What's happened is that the transitional VM has restarted before the post-installation script came out. However, in the past, I had noticed that the VM Studio that recognizes and cleans. In this case, there no cleaning. A previous generation succeeded as shown below. My question is if there is any command the virtual machine of comments/provisional, which 'determine' the completion of the Post-Install, so the Virtual Studio machine can pick up and transfer/package the bits of the vmdk disk images and give me a successful build? I know that all the elements of post-installation script had been completed successfully.

  If the build was successful:

  2009-11-30 05:01:41 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 05:01:41 to complete, please check that the construction is progressing

  2009-11-30 05:01:41 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 05:18:11 the transient VM is now in offline mode. Post-OS Setup log file recovery...

  2009-11-30 05:18:11 installation is complete.

  2009-11-30 05:18:11 post-OS installation error checking...

  2009-11-30 05:18:12 VM carrying host provisioning to Studio; This may take a few minutes...

  2009-11-30 05:53:15 provisioning host cleaning...

  2009-11-30 05:53:15 checking if provisioning session is still alive and the transient virtual machine is always on.

  2009-11-30 05:53:36 Unregistering transitional VM configuration host.

  2009-11-30 05:53:36 remove transitional VM configuration host.

  2009-11-30 05:53:38 the development of the virtual machine.

  2009-11-30 05:53:38 packaging of the virtual machine.

  In the normal flow, you shouldn't have to do something special for "cessation of distribution".  The VM output should be in/opt/vmware/www/build / < instance-bld > / export dir in the VM Studio when using Studio to build a W2K8 device without your installed application. The Studio build process is now out of the picture. You can then copy or import the virtual machine to your platform of choice virtualization, power, install your application, closing. And copy (or distribute) the VM whenever you want.

• Simple problem - error 1046

  Hello

  So when I publish my flash I have this error "1046: Type was not found or is not a compilation constant: objectifs_btn.»

  Here is my small code...

  import flash.display. *;
  import flash.events.MouseEvent;

  objectifs_btn.addEventListener (MouseEvent.CLICK, ouvrirPopup, false, 0, true);

  function ouvrirPopup(evt:MouseEvent):void {}
  popup_mc.gotoAndPlay("on");
  }

  (objectives objective = and ouvrirPopup = openPopup in English)

  I went into my settings from AS3 to uncheck "automatically declare all instances on the stage" (can be written a little differently, literal translation here).

  My movieclip instances are really named 'objectifs_btn' and 'popup_mc', no spelling mistake.

  I looked in various forums telling me to add the two first lines (the ' import' ones), I did. But the problem is still there.

  I'm sure it's an obvious problem, but I can't see it.

  Thank you very much.

  Thank you for your advice.

  Here is the code I got when I completely removed my name of the instance (but I'm sure he gets nowhere to say, because it is obvious that the code does not work with no instance name): "1120: access of undefined property objectifs_btn.»

  In addition, I am 100% sure my instance have been appointed right since I copy me - pasting from one place to the other. And in addition, I have neglected the more then once to be sure. The code is so small, that it is not as if it was difficult to verify.

  I've done a few test more, just to "know-why" (it's nice that it works, but it's even better to know why he wasn't in the first place). I handed the "_btn" at each location, and the code does not yet. When I removed it once again: it worked. If I tried something else: it worked. And more surprisingly, if I tried an another name + "_btn" it works too!

  So here's another speculation: can it be because my instance name has been exactly the same name as the movieclip that it did not work? It changes even the smallest (by removing the plural for example), make the code works!

• LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  Nobody seems to know what to do about it. All the ANSWERS?

  LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  I learned that there was a technical problem, sent to the computer, and they replaced a part, even if my ThinkPad was out of warranty. I appreciate their owner until the problem and treat it with him.

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• Does not touch the iPhone 6 after 18 months of use.  Apple Service Center is not able to solve the problem it could material being associated and returned the phone, now I'm stuck with this expensive junk, the Iphone above 6 serious problem?

  I am in India, I was using Iphone 6, 16GB, for the last 18 months, bought in Australia, progressively, the touch screen not responding. Then the problem started to happen frequently. I said, all ideas update, (9.3.2) reset, restore, etc., etc., nothing helped, finally the Apple so-called service center has confirmed that it is a hardware problem, is not repairable and advised me to return the phone and scrap it or to pay nearly 60% of the phone cost to get another phone as replacement. (It might be a refurbished phone).  As I see a lot of complaints in the blogs on the problems of the iphone 6, Apple has not taken any measure to solve my problem and trying to make more money on behalf of replacement... Now I'm stuck with such a pricey gadget... should I buy new Iphone?

  Sorry, but an iPhone can be repaired by Apple or a Service provider authorized Apple in the country of purchase. If you think of buying a new device, buy it in the country where you will use it will save you a lot of trouble if you need service.

  And, according to usage, a 16 GB model might not have enough free space left to work properly, which can also cause the phone to lag and unresponsive at times.

• My iphone is stuck with the itunes logo

  my iphone is stuck with the itunes logo. How can I unlock it? »

  Your phone needs to be restored. Take a look at the instructions here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• How can I permanently disable obsolete warnings because I'm stuck with the old machine, I

  I'm stuck with OS 10.4 and can't update Firefox or plug-ins all further. Get - again and again! -caveat by Firefox. How can I disable those permanently?

  This is how you do it.