Error 105: Setup is unable to find installation languages in the installation program. COVER file

Similar Questions

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  Hello

  our server gives error for 1 week now:

  SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  We have already tried updating ESX 3.5 patch 2 Patch 3 = & gt; no results!

  I'm really a noob VMWARE, our expert is on vacation

  other threads that I made these commands:

  esxcfg-mpath - l

  fdisk-l/dev/sda

  vmhba1 esxcfg-rescan

  I don't see any errors these commands of witch

  Please help me!

  Hello

  Your HBA fail no more. If there is a San, I would check to see if there's a cable problem and if so fix the cable, GBIC, card, etc. You wish to study the logs of your SAN network to get better information.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

  I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

  Well Yes, if the application requires Java to run, you have to reinstall Java to get the app runs.

• Where can I find download and unzip the first_website_pt1.zip sample files

  Where can I find download and unzip the first_website_pt1.zip sample files

  Jeff, thanks for responding. I found it actually. It is on the DW

  tutorial on adobe.com. On the page that there was the location of the link, I just didn't

  read all the instructions... lesson learned once again, read the manual.

• iOS (iPad): error "Unable to find traits named" during the 'standard' generation only

  Hello

  I built an app with happiness on the desktop and the "fast" mode without any issue. However when I Isaiah to compile Standard mode I get the following error will appear:

  Exception in thread "main" java.lang.Error: unable to find named features: spark.components.supportClasses::StyleableTextField

  at adobe.abc.Domain.resolveTypeName(Domain.java:232)

  at adobe.abc.Domain.resolveTypeName(Domain.java:149)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveTypeName (GlobalOptimizer.java:272)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveSlotType (GlobalOptimizer.java:946)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveType (GlobalOptimizer.java:535)

  I think it has something to do with the fact that I have a preloader class with my request. Even if it is not necessary for the iPad itself, this app is cross-platform and is intended to be built as a standard swf for web use, so I would like to keep in there. I had to include the following two paths as records of CFCS in my way to build Actionscript-> library path in the project settings for it even compile in the first place:

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\libs

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\locale\en_US

  So I suspect that they may have something to do with my problem. I use the latest released SDK Flex with Adobe Air Flash Buidler 4.6 3.4.

  I've seen tons of people complaining about this error when it comes to Air Native Extensions (ANE) but I do not write one. Someone has encountered something like that with just a simple app?

  Thank you!

  I solved the problem. I had to include manually in the source path C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\projects\mobilecomponents\src, which is the case of the traits: spark.components.supportClasses life. When I tried with Flash Builder 4.7 or 4.04 FlashDevelop, I didn't have to do so I don't understand the inconsistency here. But at least it compiles.

• I have a Canon mg2100. When I scan the error message says that it cannot find a path to the file

  My Canon mg1200 prints and scans, but suddenly the picture scanned/doc is unable to find a path to any file.  I started having this problem yesterday.

  Hello.

  This error may indicate that the current location of registration has been moved or renamed.

  Go to the settings menu in the IJ Scan Utility.  Once there, you can define a new location for the tabs on the left side of the record menu.  Once this has been done, try scanning the IJ Scan Utility to test the fit.

  It has not responded to your question or problem? Find more help contact us.

• Lost icon of report of trusteer, unable to find an answer on the Web site here.

  I've just updated to Version 6 of Firefox, I lost the Trusteer report icon located on the tool bar, the same thing happened when I downloaded Version 5, I was hoping that my information was still available in my messages Inbox when I logged in Mozilla, but unfortunately he went, I searched the Web Trusteer site and I am unable to find anything.

  Trusteer Support technical report - https://support.mozilla.com/en-US/questions/862201

  We are pleased to inform you that a version of the report that supports Firefox 6 has been released and is now available for download in the following link:

  • http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  If the report indicates that the version of the report that you are trying to install is older than the version already installed, please follow these instructions:

  • (1) choose uninstall report
  • (2) when you are prompted, select 'delete all user settings '. Please, assisted by the following image - http://consumers.trusteer.com/files/images/uninstall.jpg
  • (3) reinstall report from the link above

  Check and tell if its working.

• Unable to find 8 Xcode on the app store.

  I want to update my version of Xcode, but I can't find 8 Xcode on the app store.

  Currently I m on 7.1.3 version but there has been no notification of update for Xcode 8.

  This is a beta version. Click here instead of looking in the Mac App Store.

  (144198)

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• I'm trying to connect to internet, but get an error saying "Windows is unable to find certificate to log on to the network."

  I'm unable to access the internet.  I am told there is no connectivity or a metered connection.

  Hello

  You have a wireless connection?

  Follow these steps and check if it solves the problem:

  a. click the wireless in your bar tasks and under related tasks, click Change advanced settings.
  b. now click the wireless networks tab and select the network in the list below. Click properties when you select the wireless network that has issues.
  c. click the Authentication tab and now uncheck 802 authentication. 1 x activate IEEE for this network box.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Bookmarks: Unable to find and edit in the Bookmarks Manager

  I want to clean my favorites that are a real mess and have been moved from one computer to another over the years. If I click on bookmarks, all list shows but if I click on the bookmarks show are all bookmarks, only tidy folders, not display bookmarks that are not in the files. Then someone know how I can get all the bookmarks sorted showing? They are not in the unsorted bookmarks folder.
  Thank you
  Jayne

  N the bookmarks manager that is labeled Menu bookmarks is itself a record. That opens on the right side of scroll down, who can then be bookmarks that you have not yet found.

  If bookmarks are those on the bookmarks toolbar look in this folder.

• When I run the fix on Microsoft fix the site, it says "unable to find a version of the runtime to run this application. How can I get the runtime?

  https://SkyDrive.live.com/redir.aspx?CID=d7389b68b3a275ad&RESID=D7389B68B3A275AD! 120 & Thierry = root

  a link to my disc of sky with the cleaning tool that I use.

  Took me 35 minutes to download the four files on the disc of sky so it is an estimate on what it will take to download. Save to your desktop, and then use the cleaning tool.

  post to when.

  I used your cleaning tool and then installed NET Framework 2.0. FixIt has run and it worked. Updates work now. It took a lot of time to fix this and I couldn't have done it without your help. Thank you very much!

• How to find if you have the PowerPoint program on your computer?

  How will I know if this computer has a Power Point program?

  You have Office? If this isn't the case, you probably haven't PP. It will appear in all programs, and you can also do a search for it. Just type powerpoint in the search bar.

  If you just need to see a PPS attachment, download the free viewer.

  PowerPoint Viewer 2010
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=cb9bf144-1076-4615-9951-294eeb832823

• I download Lightroom 6 folder has been created, but cannot find how to open the actual programs lightroom I hurt

  It comes

  I redeem code and program download and put himself in a folder BUT now can't see how to launch LIghtroom to start editing.  What I misseed on?

  Hello

  Please see launch Adobe Creative Cloud apps

  Hope that helps!

  Kind regards

  Sheena