"Error 120".

Similar Questions

• Satellite U400 BIOS 4.0 works no-error 120

  Hi all.

  I tried to update my u400 with the new BIOS 4.0 and said WinPhlash BIOS is not compatible with the current system BIOS + new part number of BIOS does not have part number for the bios system. Error 120.
  He said that I should see the help, but there is no .hlp to open...

  I know that I have downloaded the correct file, I flashed the BIOS previously, I now have version 3.7

  Someone knows how to fix it / had the same problem?

  Tamás Lengyel

  What is the exact model of your Satellite U400 number?

  I checked the Web from Toshiba site and I can find Satellite U400 different model numbers, so I think that not all BIOS is compatible with each U400.

  Then check the Web from Toshiba site again and choose your model from the list:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Laptop-online Satellite-online Satellite U series-online Satellite U400 => (* short model No. *)

• How to remove the error-120 code in labview?

  Hi all

  I use to communicate with the keithley 2410 13 LabVIEW and GPIB device.

  I made a program of sweeping the stairs of programming using keithley 2400 user manual, but on the interfacing it gives 'error code-120' i.e. error of digital data.

  Can someone tell me please how to remove this error and also check my program with orders.

  Concerning

  sak16091991

  Hi sak.

  you determine the exact command, which gives this message 'error - 120' of the Keithley.

  ymanglik should be able to explain the procedure now, it uses the same device with similar problems

  I guess it's related to this part of the code:

  

  What is the reason to use FormatIntoString here? Why add a constant number to string? Why not just write the number in the string constant? Where should the number be attached? Everything in the end?

  BTW. you don't need this structure of sequence - it's all in the stream!

• Error (120,9): PLS-00363:

  Hello guys,.
  
  
  I am facing an error while passing an out* parameter in a procedure call.
  
  the error is:
  
  Error (120,9): PLS-00363: expression '< expression >' cannot serve a purpose of assignment
  
  and the code is:

  create or replace
  PROCEDURE usp_abc
  (
  v_pct in number  ,    
   v_pVt in number  ,
  vr_payagainst ,
  vr_Todate
  ) 
  as 
  begin
  ---
  ---
  ----
  -------
  usp_xyz (
          v_pTrantype=>vr_payagainst,
          v_pTrandate=>vr_Todate,
          v_pcd=>v_pct,
          v_pVd=>v_pVt,   
          *v_pLedgerID=>null*,-----------------> the  line generating error
          )
  ----
  ---
  -----
  ---------
  end;

  the v_pLedgerID parameter in the usp_xyz procedure has been defined as
  
  v_pLedgerID OUT NUMBER
  
  
  could someone help me fix this bug...
  
  
  Thank you very much

  Try something in the sense of:

  create or replace
  PROCEDURE usp_abc
  (
  v_pct in number  ,
   v_pVt in number  ,
  vr_payagainst ,
  vr_Todate
  )
  as
    l_pLedgerID number;
  begin
  ---
  ---
  ----
  -------
  usp_xyz (
          v_pTrantype,
          v_pTrandate,
          v_pcd,
          v_pVd,
          l_pLedgerID
          )
  ----
  ---
  -----
  ---------
  end;
  

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:325417134618

• V5.3.49.124_A Toshiba Video Player-installation of patch

  Hello
  I am trying to install an update for Toshiba Video Player, released February 15, 2015 - patch version 5.3.49.124_A. The problem is, whenever I try to install it it says that its extraction of the file, then an error message appears, "Failed to create the file, error 120." Please help in trying to resolve the above error.

  Thank you

  Inayat

  Hello

  Can you please tell us what model of laptop do you have?
  You use your laptop computer with the operating system preinstalled (factory settings) of origin?

• Portege R700: VAP and Touchpad download error (119 and 120)

  I tried to download value pack and touch pad programs
  However when I tried to run the downloads I get errors for touchpad 119 and 120 for the added value.

  What should I do?
  I can't properly use the F5 function and the touchpad.

  On the page of the Toshiba UE driver in area protected R700 you can find drivers for Win 7, Win 8 and win 8 upgrade. For each system, there are various packages VAP and touchpad drivers.

  I put t know what PPV and the touchpad, you mean but in my case, I was able to download the VAP and touchpad for Win 7 and it worked correctly.

• Equium L20-197: incompatible BIOS - 120 error Code

  I en laptop equium l20-197, model PSL2ZE, it is on the site of toshiba, when I select the bios upgrade section, it takes me to the listed page to download with my laptop, I download the bios based on windows and during the flash, it stops with the message "incompatible bios, error code-120.
  any ideas of what could be the cause.
  Kind regards.

  Hello

  I guess you have tried the win-BIOS version.
  Please check this Toshiba document on procedures for the BIOS update:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Also check this topic on BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11097

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• error on execution of fpclose.vi when you use FP-1000 and two FP-TC-120 module

  I have an error that occur in my LabVIEW program by closing connections Point field.

  I use LV8.5 and im to connect to a FP-1000 (native RS-232 port) controller that connects to two modules FP-TC-120, under XP.

  The error I get is "error 33589' caused by 'FPClose.vi', is actually the second"FPClose.vi"that produced the error, as shown in the picture by the giant arrow. Strangely, there does appear to be an effect of the program and it runs and disconnects as should be, its mostly just bugging me.

  I can't find this error listed anywhere, I can't find a nice long list of errors.

  I have an insidious sense that when I close the FP read labels with the FPClose.VI I am actually closing connection to the PS module and therefore do not close the system as intended.

  I would be grateful is someone would instruct me as to the cause of the error, and what I should do to properly close the FP module.

  Well, I managed to get to the bottom of the problem, it was not caused by FPClose!

  Errors where of course be cascaded through FPClose and then the 'error' said that the source was the second "FP Close.vi" he did the second "PS Read.vi". The fact that the IAK was in a loop was not the cause of my problem, but it's a clear sign of poor programming!

  Error reading FieldPoint 33589 actually is that some channels are determined to be OpenLoop. In my case I had all the channels of the first bank connected to the K-Type thermocouples, but only 2 channels of the second Bank connection and so the error were raised in the second "read FP' and cascading to the second"FP close. " To consider an error is actually a misnomer because it is actually a warning and has no influence on the conduct of the program.

  I think that the original example I posted was written for LV 6.1 and FP 3.x. I updated my own example to update methods used in LV 2011 and FP 6.0.9, they run a lot smoother than the previous method. I hope this might help someone else in the future.

• HP Envy 120 error codes

  My HP envy 120 comes up with this error code after plugging to power with a blue screen. I can not access any function. Help, please.
  Thank you

  Hello Sophie,.

  Please retry the procedure which should solve the problem below...

  • While the printer turned on, unplug the power cord from the back of the printer.
  • Power supply of the wireless router.
  • Wait 30 seconds.
  • Connect the power cord to the printer. Printer must turn on automatically, or press the power button to do so.
  • Wait until the printer initializes and is inactive.
  • If there are no errors as indicated, and then turn on the router.

  If the problem persists, please call the HP Technical Support for assistance.
  
  If you are in the United States, the toll free # is 1-800-474-6836.
  
  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Error code: 5 - problems with Zune 120

  How I can fix my zune 120, model 1376 because error number 5__

  Hi, Caesar,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  For more information, you can also contact Zune support.

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bus SCSI soft CX4-120 error

  Hello

  Everything began to receive these warnings (about 10) our CX4-120

  Soft code error event of SCSI Bus 0 x 801 all for the same drive.

  I was wondering if there is anything I can check if there is a problem with this particular car?

  Thank you

  Hello doyleja2,

  Yes because you have a spare drive on your CX4-120 if you have a drive down it would be the move & replace the defective drive.  Like eating Dev said that you can get a soft scsi bus due to a bad sector error.  So what if all you get is just the SCSI Bus error & not getting is not recommended as disk replacement then the drive should be good.  But you'll want to keep an eye on it to see if in the future, you might get a recommended disc replacement if soft scsi bus errors start to come more often on the same drive.

  Please let us know if you have any other questions.

• Error creating the store of data on iSCSI LUN (EMC CX4/120)

  I run an error when you try to create a data store on a Clariion CX4/120 system.  Connectivity to the San is performed via iSCSI.  I exhibited with success the target on the storage card and it shows in Configuration > storage adapters > vmhba33 > Details.  It has a capacity of 5.37 to.

  When I go to Configuration > storage and select Add..., I can select the disk/LUN.  The LUN appears here as well.  When I click Next, it fills the device information and location and also reported "the HDD is empty."  After 10 minutes, it generates the following error...

  Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" of object "ha-datastoresystem" on ESXi '172.20.100.78' failed.

  I did some research on Google and looked around here on the website of VMware, and I can't find any references to this error.  Are there log files for the process that I can look into?  I must engage EMC and see if there is a problem with the SAN itself?

  It has a capacity of 5.37 to.

  VMFS data storage limit is 2 TB less than 512 bytes. Try presenting small LUN, then it should work.

  André

• Error 2101: ThinkPad T430 and Nocti OCZ 120 GB

  Hello

  After about a month of use, I suddenly got an error: "2101: Drive error detection on hdd2 (sata mini)". Simply by browsing the internet system hung up and after the reboot, that the error appeared.

  I read that people here had same error just after the Assembly of their SSD - mine has worked for a few weeks.

  The problem appeared shortly after the auto BIOS update but not right after flash. 2 or 3 reboots went smoothly.

  Strange, it is now my BIOS version 1.16 when crashes version 1.17 - on the web since last Wednesday the update went Saturday.

  Any ideas how to avoid sending anything (laptop and SSD) to RMA?

  I already have RMA to OCZ ticket but want to save time and do not want to lose the data.

  Besides I don't know if this isn't the BIOS: Lenovo's new.

  Thanks in advance for any help.

  Gootchio

  Okay, this Monday, I had Nocti replaced by OCZ and it works great - now

  So it was no fault of Thinkpad.

• installation of windows 7 on ssd error W520 intel 510 120 GB

  Hi all I need you help.

  I wantest install windows 7 on my newly purchased ssd, but I always get following msg of error on the screen to install windows custum:

  I have to translate it from German into English:

  Windows cannot be installed to this disk. (...) PLS, make sure that the drive controller is enabled in the bios.

  Please help me

  (I get the error as if I try to switch to the compatibility option stata (no ahci))

  THX

  Best regards

  I solved the problem, Yes.

  This is the uefi mode that caused problems.