very slow Satellite Pro 6100

Similar Questions

• Very slow Satellite Pro A100

  Has just been given a Toshiba Satellite Pro A100 computer laptop and it works very very slow.

  When no programs are running, the Task Manager process tab indicates that the laptop is about 95% idle, but the performance tab around 50% or more.

  I ran anti-virus, cleaned a lot of software that I use, XP (service pack 3) update and different drivers, but it works still slow.

  I guess I have to re - install XP, but unfortunately I don't have a copy the disk recovery product that came with the laptop.

  Anyone know if I will be able to get your hands on a copy of this disc.
  If it helps, I have two drives available for other XP laptops that I own, but I don't think I'll be able to use them to reinstall this copy of XP using the label of serial number 25-digit number based on the laptop.

  Hello!

  It is possible that it s a software problem, but it might be the case.
  What antivirus or security software internet you use? Have you tried to install another, for example AntiVir?
  In addition, you can do many things to improve performance. Defragment the HARD disk, disable startup programs, clean the registry for example and to this day. Google will help you learn more.

  Finally and above all it is possible to order a recovery disc. So, contact the nearest authorized service provider in your country.

  Good bye

• Satellite Pro 6100: very slow recharge battery

  I bought a new battery pack for my Satellite Pro 6100 because my old Battery Pack loaded very slowly, about 5 per cent in 12 hours. But it turns out that my other one has the same problem.
  The problem may be the charger or the laptop.
  I already tried to unload the batteries fully.
  Can someone help me.

  Hello

  It is not easy to tell what can be the problem, but if you use the new battery pack and the problem is there, it is possible that electronic power on your laptop is not working properly.

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• [u] [b] Satellite pro 6100 + external projector problems [/ b] [/ u]

  Dear friends,

  I am trying to solve this problem:

  When I connect to the satellite Pro 6100 a 3rd party bCool XG1 DLP projector (a very good) I can see everything fine except DVD.

  I better explain: I can see the movies on the screen of the laptop, but nothing on the wall...

  Notice that I can look at these files directly on the screen, but on the wall...:
  MPEG files (Quick time Yes, but not WinmediaPlayer);
  AVI files (Quick time Yes, but not WinmediaPlayer);
  MOV files (Quick time Yes, but not WinmediaPlayer);

  DVD: (With Intervideo Windvd) Ok on the screen, but no output from the projector.

  Note that if I use the small window mode, the projector output image is correct except inside the window that is displayed in black (but is OK on the screen of the laptop).

  Who can help me?

  Thanks in advance.

  Stefano

  Hi Stefanohf,

  When you pass the output mode you have with keys FN and F5?

  also what settigs are set in the display driver? Right click on desktop, properties and parameters.

  go to advanced and nView. There should be active clone!

  Try this!

  Goodbye, Sam

• Install the new hard drive on Satellite Pro 6100

  Hello

  I have the Satellite Pro 6100 and the hard drive has failed. Bought a new hard drive but have no idea where to begin to install it. Also, I have the product key for windows xp pro, but don't have a disc. Is there a way to get around get one, or someone has any ideas please?

  Thank you

  Michelle

  Hmmmm... It's very strange that you n t have idea how to start. Throughout history, there are only two options:
  -for the installation of an operating system you can use the original Toshiba Recovery disk that came with this laptop. If you n t have it then
  -use the Microsoft installation for the installation of the OS disc. All the drivers, tools and utilities must be installed Additionally one by one. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads

  Please note: the product key at the bottom belongs to original recovery image so you probably won't be able to use it for the activation of the operating system.

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• How to clean the cooling on Satellite Pro 6100 module?

  Since my laptop for some reason stop (explained in my last post), I read messages from others who are similar to my problem and some of the responses that they was that they must clean the cooling with a vacuum (vacuum) module.

  So I was wondering how to clean it and where is it? (I m not an expert on computers)

  Hello
  I am not owner of a Satellite Pro 6100 but I saw this laptop on several pictures and it seems that the fans are placed at the rear near the CC.
  If you try to vacuum dust and debris from these grids of fans.

  I found also found a very detailed instruction how to remove and open the Satellite Pro 6100. http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  BUT if you have no experience, you must do it yourself. The best way to ask someone who knows what to do!

• Satellite Pro 6100 cannot get my GyroTransport new 'air mouse' to work

  Satellite Pro 6100 running XP Professional with SP3 and all updates as of 10/24/08.
  BAUGHT a new mouse made by Gyration GyroTransport air, but it won't work on my laptop.
  Tried in several other computers with the same OS and it works very well. In fact as a teacher, I recommend one of these brilliant sound devices.

  I tried all settings via the control panel and can not work on why it won't work.
  The laptop recognizes the name of it when its plugged in but the States, he has a problem. The dongle USB/receiver with a memory stick with some additional software on this subject, but the laptop does not regognise the memorystick at all. He acknowledges that other memory stick no problem.
  That technician school COMPUTER looked at it and can't get by either.

  It is usually on the spot.
  Any body out there of suggestions?

  This mouse works on some laptops newer with USB 2.0 ports?

  One last thing: If you use some additional hardware to help apply the manufacturer's support. Computer laptop manufacturer doesn't provide support for certain third party materials.
  What Thompson says about this problem?

• Satellite Pro 6100 stops after 15-30 minutes

  My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

  It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

  > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
  I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

  I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
  As suggested, it would be possible to remove dust using the can of compressed air.
  It should work.

  See you soon

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• Satellite pro 6100 dvd player

  Hello

  I have a satellite pro 6100, which has been fixed recently because she had the common problem with the power from the motherboard works do not (something like that). He came back from work, but the Bay of slimselect DVD does not read the CD or Audio CD. He's trying to play DVDs, but it says that it requires a decoder which I installed but then said the display resolution is too high, but do what he says does not resolve. Is this a problem with the hardware or software?
  Thank you very much

  Well, it's not easy to tell if it hardware or software's problem.

  But maybe these two steps can help you.

  1. right-click on your drive in my computer and select Properties.
  In the properties is a checkbox to enable digital CD PLAYBACK. Make sure this box is checked.
  2. in "Autoplay" to ensure that a corresponding task is associated with music CD and not 'no action '.

  Then I recommend you to check the settings of the decoder software.

  Good bye