Error 1311 drive installing 11.0.07.

Similar Questions

• Satellite L850 - error message after installing the Realtek Audio driver

  Hi guys.
  I have a Toshiba Satelite L850 PSKG8A-07E001.

  I've upgraded to 8.1 Windows 64 bit

  Toshiba Service Station software advised to update my sound driver 6.0.1.6794 to 6.0.1.7023.

  It says to uninstall the driver installed before you install the new driver.

  I uninstalled 6.0.1.6794. Then I installed 6.0.1.7023 and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1408.1410* BT_OTHER *@Windows (9200)

  Then I tried to install the old one back and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1380.1382* BT_OTHER *@Windows (9200)

  Now the original driver was designed for Windows 8. I am now running Windows 8.1.
  The new driver does not work. What should I do?

  I have loged on Toshiba's web page for this laptop downloads. The 6.0.1.7023 driver does not exist.
  Where to find gas station?

  ZEFS.

  > Where to find gas station?
  Good question. My question is: why change something if not necessary?
  In any case, have you tried to remove this driver and install an old?

• Error update driver: driver being installed is not validated

  Hello world.

  I'm nii of Ghana.

  I'm trying to update my graphics to run a 3D program requiring it, but I get the error message "driver is not validated for this computer. You can get the correct driver from the manufacturer of the computer.

  The accelerator in use the Mobile Intel (R) 4 Series Express Chipset Family
  The current version is 7.15.10.1502
  The version is the 1508

  I downloaded the 32-bit version for windows vista, but can't seem to update to the new version.
  I'm getting the above mentioned error report.
  I tried the update online utility that tells me the same. I hope that here; s a way around this problem.

  Thanks and hope to hear is advanced.

  Hello

  The error means that you are trying to install a driver that is not compatible with the graphics card.

  What cell phone do you have and what graphics chip this laptop does take?

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Impossible to install the player adobe w/o showing error #1311

  Get Error 1311 # when you try to install adobe reader! O

  Try a more reliable and user-friendly PDF Windows player.
   
  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

• 9996 error trying to install PLDS DH-16A6L-C DVD-R/RW Drive Firmware Update

  I have a HP Pavilion a6417c running 32-bit Windows Vista.

  I get the error message 9996 (your system does not meet the minimum requirements for this update. Update has been canceled.)

  Documentation, all the conditions that I see are to be logged on as administrator and use Windows Vista.  (I'm connected under the only user account on the computer, which is the administrator account.)

  Someone had a similar problem or ideas on how I can get around this problem?  The update to improve recognition of the DL disks in the DVD player, I have already lost three discs try different imaging software.

  Hello

  Open this URL for software and drivers for your PC. Click on the plus sign in front of the Firmware updates.

  There are five firmware updates. The third update firmware TSST TS-H653N DVD (+/-) R/RW (+/-) DL RAM LightScribe, is for the optical drive installed on your PC.

  Happy computing!

  Jaco

• Processing error of the driver at the start of the system: «there seems to be an error with your instalation.» Please reinstall your application'

  Original title: driver cure

  After installation of IE 8, I get a message with start up

  Driver cure

  "There seems to be an error with your instalation. Please re install your app '

  IE8 is the last that I instaled.

  Under Win XP home dell Pent 413400 Mhz; 1.28 GHz, 256 MB of RAM. Thank you, jaro

  Hi Mooneymaniac,

  You can start your computer in a clean boot to find the program that is causing the problem. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Device driver software has been installed correctly

  I built a new desktop computer and installed Vista x 32 last summer.  I had no problems until recently, when I tried to plug in a flash drive a friend and Vista has problems to install the driver.  I received the message:

  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  USB mass storage device
  Not enough memory is available to process this command.

  I ended up plugging the flash drive on my laptop and transfer the files to my desktop on my home network.  The second problem occurred a few weeks later, when the internal memory card reader that I had installed has stopped working.  I thought it was a driver problem, so I uninstalled the device by using Device Manager and restarted my computer, thinking that the plug-and-play device should be automatically reinstalled.  Upon reboot, Vista tried to reinstall the device and ends with a similar message to what I had received for the flash player.

  I was determined to get my pictures on my computer so I plugged into an external USB card reader.  I received the same message when trying to install it.  Finally, I tried to plug directly into my Canon SD880IS, but again received the message.

  Does anyone know why Vista does not recognize one of these USB devices?  I tried a variety of USB ports on my computer without success and everything that I had already installed works always.  I'm not sure what the message is referring when he said "not enough memory is available to process this command."  I have 151 GB free on my disk system and 4 GB of memory installed.

  Thanks in advance!

  spritemv, do a SFC scan for me, let's see what are the results:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER: sfc/scannow
  4. When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Although your question could not be linked with protected system files, I check if you have any other corruptions on your system.
  It maybe your Windows Installation has picked up corruption over time by the program facilities.

  To continue:
  What happens when you start with a card inserted into your card reader, memory does make a difference of recognition?
  If it is a device that you have personally installed, you can check the OEM for any possible driver update, we can use?

  Check the status of the device and the driver Version:

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Double-click the category containing your device driver, and then double-click the device name.
  3. Check the status of the device under the driver tab click on general tab, check driver provide Date of the driver, the driver Version, digital signer. Please provide this information.
  4. Click OK, exit Device Manager.

  See if you can completely uninstall and reinstall your card reader who follows the steps, please check the categories for the time installed thumbdrive you mentioned to see if we can remove that as well:

  Uninstall the drivers of hidden devices:

  1. Click Start-> click all programs-> on Accessories-> right click on command prompt, select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. At the command prompt, type the following commands (press ENTER after each):
  3. SET DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  4. devmgmt.msc
  5. When in Device Manager, click view and then show hidden devices
  6. Expand the category that contains your device, and then double-click the name of your device.
  7. Click the driver tab and then click on uninstall.
  8. If there is remove the software this box of the device driver, check (make sure that you have an internet connection so that you can buy these drivers). Read and confirm notification, click OK.
  9. Quit Device Manager and restart your computer.
  10. You will be asked at new hardware detected. Select search and install the driver software. Check permissions. Windows will now search for the driver for your hardware and reinstall.
  11. Retest the device

  In regards to your iTunes message, see if the disassembly of the upper and lower filters apply to your situation:

  Delete upper and lower filters

  Click Start-> click on all programs-> on accessories-> click notebook.

  Copy the following commands, and then paste them into the opened Notepad window:

  Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\FiltersBackup.reg
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

  On the file menu, click Save as, and then type DeleteFilters.cmd

  Click on save as type and select all files (*. *).

  Save the DeleteFilters.cmd file to your desktop.

  Right-click the DeleteFilters.cmd file, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Try to install updates again.

  Notes

  After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom CD/DVD filter driver by double-clicking on the FiltersBackup.reg that the command script exports to your desktop. If the problem is resolved, delete the DeleteFilters.cmd file that you created.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion g6 2226tu: 'no hard drive installed' error in material diagnostics UEFI

  My pc is very slow and freezing much n after troubleshooting and consulted technicians on the chat, I went to the recovery. It's everything is OK with recovery but the same problem was there. N all of a sudden today I tried to restart it when it froze, it showed a blue screen with the error 'blackout driver State' it displays information is collected to be sent as a report. After 10 minutes, it ended at 100%. N he tried to restart, but he went to gray white screen after the execution of the repair automatic FIR seconds. After five minutes of waiting, I turned it off n tried to turn on n check with hardware diagnostic uefi. But he could not detect my hard drive of 500g. She appeared no hard drive or hard drive not installed message.
  Now what is it? My hard drive broke down, or it could be another hardware problem?

  He succumbed to a slow death for a long time, but now he is dead and must be replaced. Chances are that it is past the time what data could have been recovered. Sorry for your loss. If you want help replacement and software, we can do.

• install error code driver audio realtek hd: 0x000005b4 RC of windows 7 64 bit

  install error code driver audio realtek hd: 0x000005b4.  I have downloaded the latest drivers for it and it will not complete installation.

  I also used the player agent scan my drivers and found a few readers chipset intel not up-to-date.  as the usb drivers and some drivers of bridge.  I have the chipset intel x 58 on asus p6t motherboard.  The system works very well with the 7100 built pilots but won't let me update for new pilots.  I run the establishment of intel he'll think only 3 steps and then I said it installed, but installation did not cross.  the reason why I wanted to update my drivers smart game is expect to completely solve the audio driver problem.    I read allot threads, some of them said something about the corruption of the registry? or the windows install program does not?  Help!
  by the way all the this road goes after that I installed I Tunes from apple!  Since then I've deleted from my computer.

  I plan on keeping the RC until the end of the 2010.    So I guess I'm stuck.   Thanks for the help of Mark, André.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Printer does not work with the driver installed and the error 2081883395 while unistalling the driver software.

  I have a HP Deskjet 3050 J611which a printer prints perfectly wireless or if the software is not installed, although it won't scan without software.  When I install the software, it does not work.  When I try to uninstall the software I get a 2081883395 error, and it will not erase the software.  I managed to download a software that did delete and I reinstalled, have the same problem, but can't find the software to remove the HP software.  I tried to install HP disc and download.  What is a 208 error?  How can I remove this software?  And how to install the software without this error (maybe it can work)?  Thank you.

  Original title: uninstall error 208

  Hello CLARENEWMAN,

  Thanks for posting your query in Microsoft Community Forum.

  As you have found problems when uninstalling the driver, I suggest you to try the next fixit and then try to uninstall the driver.

  The problems that the programs cannot be installed or uninstalled

  After uninstalling the printer driver, install the full software features for your HP Deskjet 3050 has e-all-in-one printer - J611a from the link provided below.

  HP Deskjet 3050 has e-All-in-One Printer - J611a drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=CA&product=5061092#n175

  Note: Select the architecture of Windows 7 in the above link.

  You also try to run the troubleshooter printer for that matter and check if it helps.

  Open the printer Troubleshooter

  Check also:

  Windows wireless and wired network connection problems

  Solve printer problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• error message: cannot install on this screen analog copy protection. Try to update graphics driver.

  Original title: analog?

  When you try to use Windows Media Player to read the CD/DVD Metallica ST. Anger, I get the error message: cannot install on this screen analog copy protection. Try to update graphics driver. What copy protection, I bought this junk! I should be able to use the media in any setting I choose.

  When you try to use Windows Media Player to read the CD/DVD Metallica ST. Anger, I get the error message: cannot install on this screen analog copy protection. Try to update graphics driver. What copy protection, I bought this junk! I should be able to use the media in any setting I choose.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  You can try VLC Player. It of absolutely free and supports more file formats.

• Cannot install the printer driver - windows encountered an error trying to install it

  I need help with my HP f2180 printer. I have windows 7 and so far, the printer was working well. Recently, the printer has decided to not work and all my attempts to uninstall and reinstall the complete software of features of the HP of the site result in: FATAL installation ERROR. When I plug the cable USB printer appears in the control panel. When I try to upgrade the driver I get this message: "Windows found driver software for your device but encountered an error trying to install it. Extended attributes are incompatible. »

  I can still scan and copy the printer but cannot print.

  Any help would be appreciated.

  Cheers, Brooke

  Hi Brooke,

  Have you made changes on the computer before this problem?

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and Scan Doctor any time you need to solve a problem with your HP printer.

  Try printing HP and Scan Doctor for Windows

  You can also see: troubleshooting printer all-in-one HP Deskjet F2180

  It will be useful.

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.