WAN problem with DLINK KvD-g1402s WVC210

Similar Questions

• Problems with Agency CS6 dlink AE

  Computer: MacBook Pro retina, i7 clocked at 2.6 ghz, 16 GB ram, 256 GB HARD drive

  Software: Adobe CS6 (V6.0.2) Master Collection via subscription creative cloud

  Graphics card: NVidia Geforece GT 650 M 1 GB

  Driver CUDA: V5.0

  OK I have some weird problem with a dynamic CS6 body binding to CS6 AE;

  (1) AE when dynamically linked runs in CUDA V4.0 makes by CPU but when openned runs directly in CUDA V5.0 renders by GPU

  (2) link dymanic AE is originally tear in XDCAM files has been fixed in 6.0.2 CS6 which I am running. The screen tearing is exported

  How to solve this?

  "Headless" version of After Effects, called by Dynamic Link can not use acceleration CUDA; treatment is done on the CPU.

  The XDCAM EX of tearing in first fix Pro CS6 (6.0.2) did not in updates for After Effects yet.

• Problem with T500 Intel 5300 AGN WiFi fixed...

  I finally found the solution to my problem today, and I write this information in the hopes that someone can verify in their environment, what I found in mine.  Also in the hope that it will save someone else the weeks of effort it took resolve.

  To summarize, my problem was that I was able to stream audio or video from my local network or from the internet without losing connectivity frequently or permanently.  This problem started when several months ago I updated my laptop for Win 7 Professional of Vista Business.  I don't meet with the problem in Vista.

  Today, I have determined that the problem is that I am under mixed mode on my LAN that is apparently supported by Win 7 for the Intel 5300 driver.  My router is D - Link DIR-655, which is a 802.11n router can be configured for mixed mode support.  I'm running that he configured for support because my wife's cell phone supports n and g as g.  I booted up my laptop today and I began an audio stream from my server and to my surprise it worked perfectly, just as it should.  I listened for a while and all of a sudden the music started to jump.  I noticed that my wife had started just his cell phone around the same time the jump began.  On a long shot, I went to the advanced configuration of the 5300 and disabled 802.11n support forcing them to disconnect and reconnect to 54 Mbps.  This action restored my audio stream immediately and I progressed to test several LAN and WAN connectivity actions (browser, e-mail, etc.) which previously guaranteed a discontinuity in the flow.  Everything continued to work exactly as you would expect.

  I feel that the problem is with the driver 5300 rather than my router because to solve the problem, I have disabled 802.11n on the 5300, not on the router.  The D-Link still works in mixed g/n mode 802.11.  Also, I have a laptop Lenovo T61, which also has a good Intel WiFi AGN adapter to a different model.  This laptop works in n mode with no connection problems, either via the same router D-Link.

  I hope that someone else on this forum allows to reproduce my results in their LAN/WAN environment to confirm that there is a problem with the driver Win 7 currently available for the 5300.  Thanks to Lenovo technicians, who spent several hours on the phone with me and even sent me a new adapter 5300 at a time, thinking that maybe the problem.

  Okay, more than 24 hours now without any problems, 2.4 ghz and full rate of 270/300.  As with the GSM card, I tried the latest vista driver intel 5300 and poof, no problem loading.

  I decided to do so after testing with some dual-band routers.  I noticed that it worked well on 5 GHz, but if it is locked at 2.4 it had problems with all routers.  It also worked well with dlink adapter USB N on 2.4 ghz.

  Since he had worked in vista with 2.4 ghz, I decided to try this driver and was able to put all the settings back to full (power transmission, optimizations, etc.).

  13.0.0.107? seems to have a bug of driver at 2.4 ghz.  The exact version is 12.4.4.5.  So far I have found no side effects (except without freezes or crashes on the 5300).

  So, hope this works for others, if all goes well, next version of the driver it will solve, but mine works fine for now.

  -j

• Sudden problems with Airplay, Apple TV etc with WAG320N

  Hi all

  Until recently I use DSL through my WAG320N and it worked perfectly. I used my AppleTV with airplay, Vuze, Xbox and so on without problem. I just moved to a new address with internet fiber. I've reconfigured the router for all route (and not an ADSL modem) by assigning the first to act as a WAN port ethernet port. Internet works fine as speed goes, but the wireless LAN is not optimal. I can't get my AppleTV to find iTunes on my laptop and Airplay is very slow and laggy. The router settings remained unchanged at first, but now I tried to reset to the factory settings and start over, this does not solve the problem however. I'm a bit puzled on this, as I know, the change of service provider (and go from ADSL to the fiber) should not have effects on the local network? I noticed that Vuze complains about problems NAT (just need to confirm that there is a NAT problem), but this should not matter in which of the local network, right?

  Any ideas what the problem might be?

  These devices are mentioned connected wireless? This could be a problem with wireless. It may be because of the interference. It is possible that in the new location, you have two or three neighbors who affects the Wi - Fi wireless signal. It is also possible that some other wireless devices are causing interference like cordless phones that moving on the same frequency with the router, the garage door openers and microwave machines. What you can do to prevent the interference must reconfigure wireless settings. Set width/bandwidth of 20 MHz channel and set the standard channel 1, 6 or 11. That should help him.

• WRT54G v7 client DHCP WAN problem

  I recently started having a strange problem with my WRT54G. Internet access via a modem cable and has been fine for months of work, and the cable modem works fine so I suspect that the problem is with the router. However the router also works for the most part, so I thought I'd see if anyone here has any suggestions. Here are the details of the problem:

  • The WAN router configuration has been set to DHCP.
  • It is used to pick up a new IP address of the cable modem with happiness when necessary.
  • One night the router stopped to pick up an IP WAN side. (nothing has changed. I am alone in the House that goes anywhere near the router)
  • Connect the modem directly to a PC works fine (suggesting to the DHCP server on the modem is fine).
  • Copy the config IP WAN from the PC to the router, as a static IP address, also allows to operate when the modem is plugged into the router and the router to a PC (which is how it is set up now, but it's a pain to have to mess with the physical connections and reconfigure the router manually whenever the modem abandons a connection (which is another question, but not one for this forum...)).

  So both the modem and the router seems to work except for the router DHCP clients. It works well as a DHCP server for the local network.

  The firmware has been upgraded (and functional), I followed the standard procedure to turn on, I have released and renewed the IP address through the status tab in the web interface, and I tried to reset the router using the button on the unit and through the web interface to return to the default settings.

  Any suggestions?

  If you have upgraded the firmware of the Rotuer and also reset the router.

  So what you do is - to open the configuration page of the Rotuer http://192.168.1.1 and admin as the password.

  Changed the type of Internet connection to DHCP and then changed the MTU to manual and size to 1364 save settings.

  Then checked the WAN IP address if its 0.0.0.0 click the Configuration tab and then click the sub-tab address Mac Clone-check the activate click on clone Mac - then save your PC settings-check the WAN IP 0.0.0.0 if box-so == Powercycle the network way to unplug the power cable from the router and the Modem and plug it in again after 30 seconds.

  When you connect the back make sure you plug the Modem first and then the router.

  Check if you're able to online or not.

• Problem with the soundcard on the computer.

  Hello

  So my pc is an Acer Aspire E1-570, and it's a windows 7 a (this isn't how say you I know). Since he did an automatic update, I have problems with my sound card. When I turn on my pc it works fine and then it will just stop working. He really starting to anoy me since I can't fix it. I'm going on vacation in 2 days and I didn't wan't to have this problem...

  Hello

  Read this information on the Windows updates that apply to Vista and Windows 7:

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  ____________________________________________

  How to get Audio, etc drivers Acer:

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  Go to the Acer Web site > review the link for the drivers and downloads Section > equip your computer model number > find your operating system > download and install the drivers etc you will find Audio.

  See you soon.

• Problem with VPN Site-to-Site between RV215W and ASA5510

  The RV215W is intended to connect a new branch via 3G, but fail.

  But when connected to the internet via a cable modem VPN works.

  I have set up with the FULL domain name and remote ip address.

  Please help me soon as soon as you can.

  Thaks a lot.

  Henriux2412.

  Dear Henry;

  Thank you to the small community of Support Business.

  I doubt that this VPN site-to-site is compatible with the USB modem broadband Mobile 3 G, but I have when even suggest to verify that the Status field of the map will show your mobile card is connected (status > Mobile network). I've seen a similar problem with a Verizon USB modem where the solution was to change a few settings in their access Manager software ("NDIS Mode - connect manually" has been selected and change this option to "Modem Mode - connect manually fixed), but if this is not your case then I suggest you to check with your service provider about supported VPN site to site on the WAN configuration.

  Except that I advise you to contact the Small Business Support Center for more information on this subject, although I don't think they will support

  https://supportforums.Cisco.com/community/NetPro/small-business/sbcountrysupport

  https://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Do not hesitate to contact me if there is anything I can help you with in the meantime.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• Problem with Tunnel VPN L2L between 2 ASA´s

  Hi guys,.

  I have some problems with my VPN Site to site tunnel between 2 ASA (5520/5505).

  I watched a lot of videos on youtube, but I can't find out why the tunnel does not...

  Both devices can ping eachothers WAN IP address (outside interfaces), but I don't see any traffic between the 2 sites. It seems that the tunnel is not open to everyone. When i PING from the local to the Remote LAN (which should be an interesting traffic for the tunnel...), the its IKEv1 remains empty...

  Am I missing something? I can't understand it more why same phase 1 is not engaged.

  You NAT won't. In your config file traffic is NATted initially and then does not match any more crypto ACL. You must move the rule dynamic NAT/PAT until the end of the table on two ASAs NAT:

   no nat (INSIDE,OUTSIDE) source dynamic any interface nat (INSIDE,OUTSIDE) after-auto source dynamic any interface

• problem with WRVS4400N router.

  Hello

  I have a problem with the new WRVS4400N router.

  After you have connected to my modem infrastructure and configured WAN configuration with my ISP provider,

  ISP see I am connected, I see that I am connected, get a GREAT link and link of 70M, about speed.

  Yet not be able to access the web trying to leave a different devices (TABLET, laptop) or different (WiFi, Ethernet cable) connections.

  When I am connected directly to modem infrastructure, Internet access is successful.

  In addition, what router previous (EDIMAX) which was also connected and I tried, access to the web succeeded.

  Can you please help me solve this problem?

  Not able to understand what is the problem.

  Thank you

  Can you access the WebGUI of the WRVS4400N when it is connected to the modem catch up.

  This is a cable modem?

  Try restarting the Modem, then once all lights went solid/normal and modem is stable, restart the WRVS4400N and try again.

  What about Simon
  http://www.linksysinfo.org

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Problems with getting an interactive E-book created in ID CS6 to work with ID CC 2015

  Hi all

  I have a problem with an e-book that I created with Indesign CS6.  He has slideshows, blocks of video image, zoomable and scrolling text boxes between assets. It was never published but was over and I was able to do work through the constructor app let me see on Viewer Adobe on my Ipad. Here, everything works perfectly. Since then, I changed cs6 to 2015 for CC and now I have problems.

  I wan't to make some corrections to the origianl design and content and publish correctly. When I open the various documents that the book consists of (a document PR. Chapter of the book) it is no longer the option to create the app that I used in the old CS6. When I export a chapter the ibooks app opens and opens the chapter, well but some interactive things do not work: my slide show does not automatically change the slide it's supposed to, I also have a zoom in the window of a drawing I did and all the boxes scrolling with text and drawings do not work either. Video clips to work however. When I check the slide show options in the document, they seem to look ok. Now my questions are:

  How do these things work?

  What is the difference in the CS6 and CC 2015?

  Can someone direct me to some tutorials that can help me solve the problem?

  I really hope someone can help I would like to finish my project I've been working on for a long time...

  Thanks in advance

  Berit

  This isn't an EPUB, it's a DPS folio. Some of the effects of work, some do not, but the overlays Panel won't be any help.

  You can add scrolling images with this: universal scrolling frames | Ajar Productions

  Pan and zoom is not supported and are neither self running slideshows. If you can give us more details, perhaps alternatives can be provided but be very specific as to how you plan on the publication of this.

• Problem with the bucket of dynamic tool...

  Hello! I have problem with the bucket of dynamics. I can't go to a specific place I want... I wan't to the color of dog is responsible, but I can not do...

  See the problem of the screen:

  

  I know that in this error table is explanation of what I do, but I do not understand what I do, why I just can't color as in photoshop with the bucket tool or otherwise...

  You have several live paint groups. You must combine painting live several groups to 1 group. Click on the button "Merge live paint" in the bar at the top of the screen control.

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.