Error 16 after the restoration of Photoshop Time machine

Similar Questions

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• After the installation of Photoshop its showing that no internet cnnection or time is incorect but two things are true can u please tell me what to do?

  After the installation of Photoshop its showing that no internet cnnection or time is incorect but two things are true can u please tell me what to do?

  Hello

  Please see solve common problems of activation and deactivation of creative cloud.

  Hope that helps!

  Kind regards

  Sheena

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• Restore the iPad App via Time Machine?

  Let's see if I can explain it clearly without writing a novel...

  We used iBank on a series of iPads in Quicken replacement.  iBank was wonderful.

  A few days ago, we decided to accept the upgrade to the new version of the App.  The upgrade has changed the name of the application of Banktivity 5.0.3.

  After the update the app is more responsible, is back with ' an error occurred during the migration of permanent storage' and when we hit OK you get the spinning wheel of death, eternally.  Fearing yet another Apple HW question I made the mistake to immediately an iPad manual backup because I did not know when the last of them automatic was and I didn't lose anything else on the iPad.

  The iPad is running 9.3.1 model number MD516LL/a H/W.

  We have iTunes to save 'automatically' iPad 'to this computer.  We do not use the cloud.

  I had an exchange of mail with the support of the IGG, but when we walked in the restoration of a previous automatic backup on the iPad, they were out of their depth.  I have no complaint with their support, they do not know where are stored the backups or how to proceed.

  So, that's where it gets interesting/frustrating.

  I try to use Time Machine to restore the App from a previous version in iTunes and then sync to iPad.

  I do not see the backup files to iPad specific laptop I use for backup "automatic" iTunes "to this computer.  I see the list of applications on the iPad iTunes in the ' users > Shared > iTunes > directory of Mobile Applications.  I'm going back in time in Time Machine to find the last backup the previous version of iBank has or Banktivity iTunes before 5.0.3... in the hopes of restoring just that specific app and data...

  ... Previous Time Machine backups have iBank or Banktivity listed in the applications!  I have looked far and sought to my heart's content, but none are here.  All other applications will appear in the list, but not iBank or Banktivity.  Now, I'm stumped... Why would not appear anywhere in the last backups?

  Having lost all historical and current in the iBank data are a pretty big disaster if I don't want to take the risk of ruining more by doing a partial or full restore iPad without understanding why the previous of iBank versions and/or Banktivity do not appear in the lists before the last manual of Time Machine backup?

  The iPad is an ideas, thoughts or suggestions would be most appreciated.

  Real applications are not stored in the backup (which contains the content of applications, your settings, documents, photos etc), restoration (backups are stored in ~/Library/Application Support/MobileSync/Backup/on a Mac, a backup is not designed to be readable by the user) would look to pick up the application of the section My Apps from your iTunes library - so looking for a old backup iPad in Time Machine won't help your find the app.

  As to why the app does not appear in your Time Machine backup of your folder "Mobile Applications", looking for the correct name of the application (the name that shows in your iTunes Apps my chapter cannot be the same as the file real .ipa computer/time Machine; some of my friends have very different names)?

• Cannot reinstall PSE 7 after the restoration of PC (Win XP). Impossible to uninstall, STUCK. Help, please.

  Error message when you try to start the 7 Elements after the restoration of PC (Win XP) "couldn't start b/c the application configuration is incorrect". When you try to uninstall 7, it doesn't appear in the Conrol Panel. But there is a Photoshop 7 folder in Program files. If someone could HELP Please, it would be greatly appreciated. I use this program so much!

  Thank you in advance...

  Here's the Adobe documentation to manually uninstall PSE7:

  http://kb2.Adobe.com/CPS/405/kb405847.html

  Ken

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Database is underway after the restore and recovery

  Database is in the waiting state after the restore and recovery.
  The database cannot start today and it displays an error message: 2 log file can be archived. Then I run the following command:

  SQL> select group#, sequence#, bytes, members, status from v$log;
  
      GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
  ---------- ---------- ---------- ---------- ----------------
           1        452   52428800          1 CURRENT
           3        451   52428800          1 INACTIVE
           2        450   52428800          1 INACTIVE
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
  
  Database altered.
  
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
  
  Database altered.
  SQL> alter database open;
  
  Database altered.
  
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  566231040 bytes
  Fixed Size                  1220580 bytes
  Variable Size             125829148 bytes
  Database Buffers          432013312 bytes
  Redo Buffers                7168000 bytes
  Database mounted.
  Database opened.

  But when I try to log on by using the EM console, it shows that the database is not open. Then I restore and recover the database by using the EM Console. But the database and then enter in pending status.
  What to do next?

  Stop the console 'EM, and then restart it. I hope all is well.

• Restore the data in the external drive using Time Machine

  Hi y ' All!

  I store my photos in my external hard drive because there is not enough space in memory is internal. This is actually my second drive external hard than my first (Adata HE720) is not the beginning of last year. Unfortunately, my WD Elements has stopped working and I can't restore data using Time Machine, as the drive is not found in Time Machine under devices, and I'm sure that I restored my photo library and many other files from my old external drive using Time Machine.

  Can someone tell me how to recover my old files? I have many other important data here including my photos and I don't want to lose them. I'm fairly positive that Time Machine allows me to get the data as is the point of it.

  Thank you in advance!

  P.S. If you guys have any recommendation on a reliable external drive, please do tell me!

  Hey guys, I found the problem.

  It turns out that I'm never giving time Machine to deselect my external drive to backup; Therefore, there is absolutely no copy done during execution Time machine. I really don't understand why Apple made this the default behavior, but it is what it is.

  So, people, don't forget to go to Time Machine preferences and make sure that you remove the external hard drive that you want to backup under options. Once you do, you can enter the time Machine and your drive will appear under devices.

  See you soon.

• BSOD Kernel_security_check_failure (0 x 00000139) while/after the launch of Photoshop...?

  BSOD Kernel_security_check_failure (0 x 00000139) while/after the launch of Photoshop... Helpteam in India thought it had solved the problem bij checking use of GPU mij... but it didn't. Anyone have similar experiences?

  Hi tonv,.

  For the same question, see this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• After the purchase, how much time have we download the application?

  After the purchase, how much time have we download the application?

  Hi Peggy,

  Download the product can be done immediately, however if you bought the subscription, you must wait to activate the product until the payment goes through, and the same goes for a perpetual license product once the payment goes through you will receive your serial number to activate the product.

  Kind regards

  Bani

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Why my colors appear dimmed after the recording through photoshop?

  Why my colors appear dimmed after the recording through photoshop? When you record directly from bridge they appear sharp and vibrant, but after taking a recorded image and open in Photoshop and resave after retouching, colors appear then faded and less saturated on this picture.

  Always convert to sRGB, whenever a file is needed to correctly display without color management.

• How Downgrade of El Capitan in Yosemite without data loss and without the help of a Time Machine?

  I, are looking for an answer to this question, but couldn't find one.  If there is an and missed it, please tell me and I will look happily on it.  I want to do it without the help of a Time Machine, because I used it at the time of Yosemite.  And I discovered that you can use a cable USB or SD to come down, but how do you do this without losing all my data?

  You must save, erase the drive, install Yosemite, restore your backup of the data

• After the restoration of an iMac from Time Machine Illustrator CC 2014 hangs at startup. Uninstalled and reinstalled using Creative Cloud icon in the menu bar, same result.

  I had to restore my end 2013 27 "iMac Time Machine after one of my mac mail application has become corrupted. After restoring Illustrator CC 2014 has tried to start, the start screen was for a few seconds then I got this error message and the program crashed: operation fails due to an unknown error. [IMPORTANT]

  I uninstalled Illustrator using the uninstall application in the main folder, then reinstalled Illustrator CC 2014 using the creative cloud icon in my menu bar. After the reinstallation is the same thing with the same error. I am running Yosemite 10.10.1. Illustrator ran fine before the system restore. Photoshop and InDesign CC 2014 start very well.

  I'd appreciate any help you can give me. I tried to discuss with Adobe, but the cat was not available.

  Thank you

  Rick,

  You could try to reinstall using step three way:

  Uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Strange things can persist without the used cleaning tool.