Error 1603 adobe common color RGB set unlock

Similar Questions

• error 1603; Adobe flash

  Hello

  I want to install flash cs4 trial version, but it displays on my screen:

  

  Please help me...

  Thank you

  PS: I m a lama

  You are welcome.

• Error 1603 when installing Adobe CS4 on Vista 64

  I'm trying to install Adobe CS4 on Vista 64 and it fails to install with error 1603.  I went on the website of Adobe, and they said that the problem is a color profile file named "sRGB Color Space Profile.icm" claiming Adobe is locked, it cannot be changed.  Adobe has suggested that I use a "Unlocker" utility found on a 3rd party Web site, but McAfee is down this dangerous site.  So second suggestion of Adobe is to search on Microsoft a way to unlock this file.  I searched, I have not found anything that could unlock a file in Vista.  So, does anyone know how to unlock a file on Vista 64?  Does anyone know how to get around this installation problem?  Does anyone know how do I know what program has a locked file so that I can stop it?  Any help would be greatly appreciated.

  I managed to solve this problem by following these steps:

  (1) open the control panel in Vista.

  (2) select the icon for color management.

  3) go to the Advanced tab

  (4) in my computer, using the device profile "sRGB IEC61966 - 2.1" which corresponds to the "sRGB Color Space Profile.icm" file
  I changed this setting to use "sRGB virtual device model profile" instead of "sRGB IEC61966 - 2.1".»  (I don't know if ' profile of device model virtual sRGB "is available on the computer for everyone, but I don't think it's so important as long as it's not" sRGB IEC61966 - 2.1 "").

  (5) I have my case the "sRGB IEC61966 - 2.1" was also used as the default value for the system, so at the bottom of the window is a button says "Change default system" click on it.

  (6) then click on continue (you need to continue administrative privilege).

  (7) make the same changes as above for the device profile in this new window.

  (8) close these panels with the changes.

  (9) install Adobe CS4 (Yeh!).

  (10) after that, I went back the color management and set the default initial profile bot and system to "sRGB IEC61966 - 2.1.
   
  At least it does the job for me.  I don't know how this will work for others.

  I hope this helps, I lost a week of messing around with this thing.

• Can someone help me with error 1603 when installing Adobe CS4 Master Collection?

  Can someone help me fix the 1603 error that prevents me to install Adobe CS4 Master Collection?

  Take a look at this help doc Adobe error 1603: a fatal error occurred during the installation of Adobe Creative Suite

• I want to know if there are a lot of components such as adobe color and setting if install photoshop? What about other adobe products? We bought adobe vendor products and provide installation CD, but many components we do not want. Please Hel

  I want to know if there are a lot of components such as adobe color and setting if install photoshop? What about other adobe products? We bought adobe vendor products and provide installation CD, but many components we do not want. Please help, thanks!

  You don't like the additional components, but many of them are essential and cannot be omitted and must they be removed after the fact.

  Mylenium

• I want that all my color settings set to sRGB so that when I print from my professional lab colors will match my screen (I'm calibrated). When I hit save under and see that there is a check box to embed the Adobe 1998 color profile in the menu, but I want

  When I hit Save as menu drop-down is checked to integrate adobe 1998 color profile and I want it to be srgb. Where can I change so that it is srgb and the rest in this way? My impressions of my professional lab and come back cast, flat and dark green or blue for them. My monitor is calibrated according to me its because somewhere I have adobe 1998 selected and color profiles are the translation not properly so I need everything to be srgb. I am also shooting srgb. Help, please!

  If you think that your calibration profile is disabled, follow these steps:

  

• Persistent message "RGB setting is different.

  I have InDesign CS2, Japanese version (much of what I write will be translations of Japanese UI, so forgive me if it does not match the wording exactly English).

  A few weeks ago, I attended a series of specific measures required by a printing press, and now whenever I open any document, InDesign said, "this document RGB setting is different from the color setting for the application."  Curiously, however, what he says are the settings of the document and he said he would change them to match demand are identical.  And no matter whether if I chose to update the document to match the application or not and no matter how much time I save the document after this, the next time I open the document, it still gives the same complaint.

  A screenshot of the dialog is attached - I translate better than I can, but I hope that someone will be familiar with it in English anyway.  It is something like this:

  -What measures should be taken? -
  

  O do not fix the document

  Policy: preserve

  Profile: sRGB IEC61966 - 2.1

  Good O the document corresponding to the current setting of the color

  Policy: preserve

  Attribution of profile: sRGB IEC61966 - 2.1

  Content placed: preserve default assignment (other choices is 'Activate all profiles' and 'Disable all profiles'

  The steps, I think I took to printing management which contained the color were the following:

  1. Edit-> color setting: set best choices 'Use pre-press - Japan2' (the instructions say not explicitly)
     
  2. Edition-> box setting mix transparency-> CMYK document use
  3. Image-> Mode-> CMYK
  4. Make sure that all of my swatches are CMYK (I already knew that)

  I guess this problem probably has something to do with the first step, and I can't guarantee that I have not other changes not listed above.  Anyway, currently when I look at my color settings, "setting" serves 'pre-press - Japan2' and the 'Advanced Settings Mode' box is not checked.  The "Operating space" section lists the RGB setting as "Adobe RGB (1998)" and the CMYK setting as "Japan color 2001 coated.  In the section "Color management", RGB is to "Preserve the buried profile" (I have no idea what that means - the other choices are 'Off' and 'Change to operating space'), CMYK is "Preserve Number (ignore Linked profile)" and it has a symbol to lock to the left of it - when I hover over the selection, the following notes say "when the document is opened, the CMYK profile is preserved. When content CMYK is placed, by default profile will be ignored, but object by object, you can choose to replace the profile (select object-> Image color setting).  With this parameter, you can also change for re-use proofing or document by checking the CMYK profiles are different. "(Sorry, that last sentence loses me - Japanese isn't my native language).  All the boxes in the color management section are checked.  I will attach a screenshot of the dialog, too.

  I have really no idea what most of this stuff done, but rather that nature 'locked' sounds setting CMYK related to opening a document, the complaint deals with RGB, CMYK not.  I recall that a few times as well a question on the RGB setting and a question on the CMYK setting is here (two dialogs one after the other), but in these cases the CMYK, we had the same mysterious problem than the current setup and adjustment that he would change the document were the same ("Japan color 2001 coated" if I remember correctly).  I didn't get that one lately (coincidence? solved?), but every time I get one of RGB.  Any idea what's going on?

  I think the "incompatibility" is really the policy, not the profile itself. Unless you change your default settings to match the document, you may not be able to get rid of him.

  I might try this on a copy of the file and see if it works: Edit > assign profile... and choose "Discard (use of the current workspace)." Say OK, then run the command again assign profiles and this time, choose the "current workspace award." As far as I know this should affect only the ID document, unrelated content. This assumes, of course, that current workspaces are correct.

  Peter

• FSX and installation error 1603

  Yesterday I installed Flight Simulator and everything worked fine.  Today, it will not be open.  I got a message on InstallDriver Module.  So, I completely uninstalled everything, downloaded install sanitation (na see FSX in the list of programs) and I tried to re - install.  I get an error 1603 feature transfer error.  I use Vista Home Premium SP2 on a HP Pavilion.  Any help?

  Hi FSXguy,
      
  Welcome to the Microsoft Answers site!

  First thing to make sure is to start with the installation in the administrator account and also;

  Method 1: Verify that the Windows Installer service is set to automatic

  1 Windows Vista or Windows 7

  Click Start, type services.msc in the search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the list of Services, double-click Windows Installer.
  3. in the properties of Windows Installer dialog box, click Automatic in the startup type list.
  4. click on start, click on apply and then click OK.
  5. start the installation of the software.
  If this makes no difference then;

  Method 2: Perform a clean boot and clear the Temp folder

  When you start Windows as usual, some programs start automatically and run in the background. These programs may include antivirus and system software that may interfere with the installation of the product. When you perform a clean boot before you start the installation, you prevent these programs from starting automatically. To perform a clean boot, follow the steps appropriate to your version of Windows.

  Step 1: Restart the computer by using a clean boot

  Note to complete this procedure, you must be logged in as an administrator or as a member of the Administrators group. If the computer is connected to a network, network policy settings may prevent you from performing this procedure.

  1. open System Configuration.

  Windows Vista or Windows 7

  a. click on start
  (b) in the search box, type System Configuration.
  c. in the list programs, click System Configuration.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. Windows Vista or Windows 7

  Under Selective startup, clear the following check boxes:
  Load System o services
  startup items load o
  o use original boot configuration
  4. click on the Services tab.
  5. Click to select the hide all Microsoft Services check box, and then click Disable all.
  6. click OK and then click on restart.

  Step 2: Delete the Temp folder

  To clear the temporary files folder, follow these steps:

  Windows Vista or Windows 7

  1. on a computer that is running Windows Vista or Windows 7, click Start
  type folder in the search box, and then click Temp in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. from the Edit menu, click Select all.
  3. on the file menu, click on delete.
  4. When you are prompted to confirm the deletion, click Yes.
  5. try to start the FSX program. If you receive the error message that is mentioned in the "Symptoms" section, remove the program, and then reinstall the program.

  Let us know if the information helped reinstall the game or for any further assistance.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to install command and conquer generals .i get error 1603 who says it's a big file, how do I do then it will install

  When I try to install command and conquer generals error 1603 rises said that it's a big audio file what it means and how to fix

  Hello

  1. are you able to install other games and programs on the computer?

  2. do you have security software installed on the computer?

  Method 1:

  Re-register the engine install and try to install the game.

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  ·         MSIExec /Unregister

  ·         MSIExec/regserver

  (c) try to reinstall the game.

  Method 2:

  Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.

  (b) click the Windows Installer service, and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

  (g) try to reinstall the game.

  See the link below and try the steps if you are running Windows XP on the computer, check if it helps.
  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

• HP support assistant, could not be installed error"1603 Fatal error during installation".

  Original title: HP support assistant failed to install

  After the update for hp support assistant failed I uninstalled, downloaded the update & tried to reinstall. It fails to install... network error 1316.A reading from the file c:\windows\installer\hp support assistant.msi. Setup restores the action with error - 1603 Fatal error during installation, see msi.chm or msdn for more information. Help!

  Hello
  Is that the question is specific to HP support assistant?
  Method 1: Run the following fix - it:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
  Method 2: Verify that the Windows Installer service is set to automatic, to do this, follow these steps:
  a. Click Start, type services.msc in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  b. in the list of Services, double-click Windows Installer.
  (c) in the properties of Windows Installer dialog box, click Automatic in the startup type list.
  d. click on start, click on apply and then click OK.
  e. start the installation of the software.
  Method 3: Unregister and register the Windows Setup program again
  See the following steps:
  a. Click Start, type cmd in the dialog box, then right-click on command prompt and click Run as administrator
  b. in the command prompt, type the following command:
  "MSIEXEC /Unregister." without the quotes and then click OK.
  Note: Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  "MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.
  c. try to install the program and check if the problem persists.

• Fatal Error 1603 Netdevicemanager 40 C309a

  I'm having trouble installing my printer C309a all in one. I get MSI.netdevicemanager40 message claiming that sup is not valid even if I try to install in C:. The fatal error message is 1603. I tried various suggestions but still getting problem. Please help before computers or printer goes out the window!

  Please help before my sanity gives way completely and WHO buy a new printer that is installed!

  Hi CraigM66,

  Follow the steps below and let me know what happens?

  Fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-66918-4&CC=US&DLC=en&LC=en&os=4063&Product=3737195&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Error 1603. Fatal error during installation. (AdobeColorCommonSetRGB)

  When I want to install adobe cs4 I can't and I have message of this

  Error 1603. Fatal error during installation. (AdobeColorCommonSetRGB)

  Please check if it works: https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html

  Concerning

  Stéphane

• Exit code 7 and error 1603 when trying to install acrobat pro DC.

  Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

  Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

• Error 1603 when you install Acrobat Pro XI - no luck with suggestions

  Hi all - I tried to download Acrobat Pro XI through the installer of creative cloud, but I get the following message is displayed:

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message:

  ERROR: installer of third party AcroPro.msi payload failed with exit code: 1603

  I managed to install Photoshop and InDesign in the same way.  I tried the following suggestions from the community:

  Empty the Temp folder

  Re-register msiexec

  Tool to uninstall/cleanup/reinstall

  He arrived at about 42% and fails each time. Any ideas?

  Thank you very much!

  Thanks, Ned.  I had already tried these suggestions.  Our finally sorted IT Ops Manager this out by running the installation program manually, rather than by the installer of creative cloud.  It was 'Adobe PDF creation add-on 11.0.01', which was not removed via the cleaning tool.

• error 1603 on uninstall creative cloud

  error 1603 during an attempt to uninstall Adobe CreativeCloudforEnterprise 1.2.0

  The target platform is Windows 7 (64 bit) with Microsoft Office Professional Plus 2010 is installed.

  Pre-installed Visual C 2010 x 64 Redist 10.0.40219

  Excerpt from the below detailed log file:

  MSI (s) (80:A4) [14:27:45:175]: op of execution: ActionStart (Name = CAUndeploy),

  MSI (s) (80:A4) [14:27:45:200]: op of execution:)

  MSI (s) (80:E8) [14:27:45:281]: call for a custom action to distance. DLL: C:\WINDOWS\Installer\MSIA458.tmp, point of entry: runDeploymentManagerCA

  CustomAction CAUndeploy returned error code 1603 (note this is perhaps not 100% accurate if translation happened inside the bin to sand)

  MSI (s) (80:A4) [16:34:25:375]: strategy user 'DisableRollback' is 0

  MSI (s) (80:A4) [16:34:25:375]: policy value 'DisableRollback' Machine is 0

  Action ended at 16:34:25: InstallFinalize. Return value 3.

  Table of contents for Setup Error.log Adobe:

  27/10/14 16:34:21:054 | [ERROR] |  | OOBE. OF |  |  |  | 664. Cannot open mediadb

  27/10/14 16:34:21:272 | [ERROR] |  | OOBE. OF |  |  |  | 3576. Cannot open mediadb

  Please follow error 1603: a fatal error occurred during installation

  Concerning

  Baudier